Portál AbcLinuxu, 7. prosince 2025 16:38
13.2.2007 10:03
Zelená potvora | skóre: 10
| blog: Stenata69
| Plzeň
Asi pred tydnem jsem aktualizoval na novou verzi nvidia ovladace a novejsi kernel.jsi si jistý, že upgrade proběhl korektně a že ti funguje akcelerace? co říká
glxinfo | grep renderer ?
13.2.2007 16:43
Zelená potvora | skóre: 10
| blog: Stenata69
| Plzeň
shrek@SHARP:~$ glxinfo | grep direct
direct rendering: Yes
shrek@SHARP:~$
Zajimave je, ze kdyz presovou okna, tak se mi CPU vytizi az na 50%, coz u aiglx neni ouplne v poradku...
Zajimave je, ze kdyz presovou okna, tak se mi CPU vytizi az na 50%, coz u aiglx neni ouplne v poradku...mě to totiž připomnělo situaci doma - nVidia se rozhodla, že CPU bude dělat všecko a GPU nic, takže s ovladačema od nVidie dostávám (v glxgears :o)) zhruba stejný FPS jako s čistě softwarovou emulací a procesor jede rovněž na 100%, rozdíl je akorát v tom, že s tím binárním bazmekem tráví procesor ten čas v jádře, zatímco v druhém případě jako user, no a právě taky že se nic netrhá (ani pod zátěží), zatímco v druhém případě nejen obraz, ale počítač tak nějak celkově ... proto mě napadlo, že jsi přišel o akceleraci - symptom "trhání pod zátěží" ... ale ta zátěž na procesoru při grafických operacích, tedy že vše jede na CPU, by se tvojí karty neměla týkat ... divný :-/
13.2.2007 17:14
Zelená potvora | skóre: 10
| blog: Stenata69
| Plzeň
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Thu Nov 9 17:55:20 PST 2006
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
EndSection
Section "Files"
# path to defoma fonts
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "stylus"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "eraser"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
# /dev/input/event
# for USB
Identifier "cursor"
Driver "wacom"
Option "Device" "/dev/wacom" # Change to
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 28.0 - 64.0
VertRefresh 43.0 - 60.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "nvidia"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
Option "AddARGBGLXVisuals" "True"
SubSection "Display"
Depth 1
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
13.2.2007 17:18
Zelená potvora | skóre: 10
| blog: Stenata69
| Plzeň
shrek@SHARP:~$ glxinfo | grep render
direct rendering: Yes
OpenGL renderer string: GeForce 7600 GS/PCI/SSE2/3DNOW!
GL_NVX_conditional_render, GL_SGIS_generate_mipmap, GL_SGIS_texture_lod,
shrek@SHARP:~$
13.2.2007 17:37
Zelená potvora | skóre: 10
| blog: Stenata69
| Plzeň
13.2.2007 18:10
Zelená potvora | skóre: 10
| blog: Stenata69
| Plzeň
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.