HP 500 Touchpad

Zdravím, vím že už jsem několikátý v řadě ale nemohu hnout s touchpadem na HP 500, mám tu Ubuntu 7.04, jádro 2.6.20-15. Neustále hlásí SHMConfig "true", byť v etc/X11/xorg.conf mám nastaveno "on"

Jsem svým způsobem začátečník, googlím nad tímto tématem již půl roku /s přestávkami/ a cokoliv změním podle netu tak nic.

posílám výpis z :xorg.conf

Section "Files" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" # path to defoma fonts FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection

Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "vbe" Load "synaptics" EndSection

Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "cz" Option "XkbOptions" "lv3:ralt_switch" EndSection

Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection

Section "InputDevice" Identifier "Synaptics Touchpad" Driver "synaptics" Option "SendCoreEvents" Option "SHMConfig" "on" Option "Device" "/dev/psaux" Option "Protocol" "auto-dev" Option "HorizScrollDelta" "0" Option "SHMConfig" "on" EndSection

Section "InputDevice" Driver "wacom" Identifier "stylus" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "stylus" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection

Section "InputDevice" Driver "wacom" Identifier "eraser" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "eraser" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection

Section "InputDevice" Driver "wacom" Identifier "cursor" Option "Device" "/dev/wacom" # Change to # /dev/input/event # for USB Option "Type" "cursor" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection

Section "Device" Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller" Driver "i810" BusID "PCI:0:2:0" EndSection

Section "Monitor" Identifier "Obecný monitor" Option "DPMS" EndSection

Section "Screen" Identifier "Default Screen" Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller" Monitor "Obecný monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x800" EndSubSection SubSection "Display" Depth 4 Modes "1280x800" EndSubSection SubSection "Display" Depth 8 Modes "1280x800" EndSubSection SubSection "Display" Depth 15 Modes "1280x800" EndSubSection SubSection "Display" Depth 16 Modes "1280x800" EndSubSection SubSection "Display" Depth 24 Modes "1280x800" EndSubSection EndSection

Section "ServerLayout" Identifier "Default Layout" Screen "Default Screen" InputDevice "Generic Keyboard" InputDevice "Synaptics Touchpad" InputDevice "Configured Mouse" InputDevice "stylus" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" EndSection

Section "DRI" Mode 0666 EndSection

a zároveň z: cat /proc/bus/input/devices

I: Bus=0017 Vendor=0001 Product=0001 Version=0100 N: Name="Macintosh mouse button emulation" P: Phys= S: Sysfs=/class/input/input0 H: Handlers=mouse0 event0 ts0 B: EV=7 B: KEY=70000 0 0 0 0 0 0 0 0 B: REL=3

I: Bus=0011 Vendor=0001 Product=0001 Version=ab41 N: Name="AT Translated Set 2 keyboard" P: Phys=isa0060/serio0/input0 S: Sysfs=/class/input/input1 H: Handlers=kbd event1 B: EV=120013 B: KEY=1004 2200002 3802078 f950d401 feffffdf ffefffff ffffffff ffffffff B: MSC=10 B: LED=7

I: Bus=0010 Vendor=001f Product=0001 Version=0100 N: Name="PC Speaker" P: Phys=isa0061/input0 S: Sysfs=/class/input/input2 H: Handlers=kbd event2 B: EV=40001 B: SND=6

I: Bus=0019 Vendor=0000 Product=0002 Version=0000 N: Name="Power Button (FF)" P: Phys=ACPI_FPB/button/input0 S: Sysfs=/class/input/input3 H: Handlers=kbd event3 B: EV=3 B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000 N: Name="Sleep Button (CM)" P: Phys=PNP0C0E/button/input0 S: Sysfs=/class/input/input4 H: Handlers=kbd event4 B: EV=3 B: KEY=4000 0 0 0 0

I: Bus=0019 Vendor=0000 Product=0005 Version=0000 N: Name="Lid Switch" P: Phys=PNP0C0D/button/input0 S: Sysfs=/class/input/input5 H: Handlers=event5 B: EV=21 B: SW=1

I: Bus=0003 Vendor=062a Product=0000 Version=0110 N: Name="HID 062a:0000" P: Phys=usb-0000:00:1d.0-2/input0 S: Sysfs=/class/input/input6 H: Handlers=mouse1 event6 ts1 B: EV=7 B: KEY=70000 0 0 0 0 0 0 0 0 B: REL=103

Co se týká myši přes USB chodí normálně.

Mnohokráte děkuji Pavel

Dotaz: HP 500 Touchpad