USB klavesnice: "device not accepting address"

Ahoj, mam nainstalovano ubuntu6.06 a nedari se mi zprovoznit usb klavesnici. Pri bootu to pise ruzna varovani a klavesnici to neprijme. Kdyz ji ale behem bootu vytahnu z usb a znovu zasunu, tak jede. Nevite co by s tim mohlo byt? Nebo jak softwarove emulovat vytazeni a zapojeni?

dmesg | grep IRQ

[   35.170286] PCI: Using IRQ router VIA [1106/0686] at 0000:00:07.0
[   35.816285] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   39.271908] PCI: VIA IRQ fixup for 0000:00:07.1, from 255 to 0
[   41.325546] PCI: Found IRQ 11 for device 0000:00:07.2
[   41.325714] PCI: Sharing IRQ 11 with 0000:00:07.3
[   41.325801] PCI: Sharing IRQ 11 with 0000:00:0f.0
[   41.447579] PCI: Found IRQ 11 for device 0000:00:07.3
[   41.447717] PCI: Sharing IRQ 11 with 0000:00:07.2
[   41.447832] PCI: Sharing IRQ 11 with 0000:00:0f.0
[   42.686524] uhci_hcd 0000:00:07.2: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.
[   57.472222] PCI: Found IRQ 11 for device 0000:00:0f.0
[   57.472364] PCI: Sharing IRQ 11 with 0000:00:07.2
[   57.472399] PCI: Sharing IRQ 11 with 0000:00:07.3
[   57.473064] eth0: RealTek RTL8139 at 0xe088c000, 00:c0:ca:18:9e:86, IRQ 11
[   59.576578] PCI: Found IRQ 5 for device 0000:00:07.5

dmesg | grep usb

[   41.320400] usbcore: registered new driver usbfs
[   41.320476] usbcore: registered new driver hub
[   41.326642] drivers/usb/core/inode.c: creating file 'devices'
[   41.326669] drivers/usb/core/inode.c: creating file '001'
[   41.327052] usb usb1: default language 0x0409
[   41.327076] usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
[   41.327085] usb usb1: Product: UHCI Host Controller
[   41.327091] usb usb1: Manufacturer: Linux 2.6.17.8 uhci_hcd
[   41.327097] usb usb1: SerialNumber: 0000:00:07.2
[   41.327152] usb usb1: uevent
[   41.327277] usb usb1: configuration #1 chosen from 1 choice
[   41.327305] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[   41.327326] usb 1-0:1.0: uevent
[   41.327369] hub 1-0:1.0: usb_probe_interface
[   41.327376] hub 1-0:1.0: usb_probe_interface - got id
[   41.327428] hub 1-0:1.0: no power switching (usb 1.0)
[   41.447137] drivers/usb/core/inode.c: creating file '001'
[   41.448424] drivers/usb/core/inode.c: creating file '002'
[   41.448755] usb usb2: default language 0x0409
[   41.448777] usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
[   41.448787] usb usb2: Product: UHCI Host Controller
[   41.448793] usb usb2: Manufacturer: Linux 2.6.17.8 uhci_hcd
[   41.448799] usb usb2: SerialNumber: 0000:00:07.3
[   41.448849] usb usb2: uevent
[   41.449382] usb usb2: configuration #1 chosen from 1 choice
[   41.449422] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[   41.449448] usb 2-0:1.0: uevent
[   41.449868] hub 2-0:1.0: usb_probe_interface
[   41.449879] hub 2-0:1.0: usb_probe_interface - got id
[   41.449948] hub 2-0:1.0: no power switching (usb 1.0)
[   41.551347] drivers/usb/core/inode.c: creating file '001'
[   41.686831] usb 1-1: new full speed USB device using uhci_hcd and address 2
[   42.688401] usb 1-1: khubd timed out on ep0in len=0/64
[   43.687862] usb 1-1: khubd timed out on ep0in len=0/64
[   44.687362] usb 1-1: khubd timed out on ep0in len=0/64
[   44.797951] usb 1-1: device descriptor read/64, error -110
[   49.901720] usb 1-1: khubd timed out on ep0in len=0/64
[   50.813729] usb usb1: uevent
[   50.813834] usb 1-0:1.0: uevent
[   50.814129] usb usb2: uevent
[   50.814238] usb 2-0:1.0: uevent
[   54.900215] usb 1-1: khubd timed out on ep0in len=0/64
[   59.899678] usb 1-1: khubd timed out on ep0in len=0/64
[   60.009664] usb 1-1: device descriptor read/64, error -110
[   60.225610] usb 1-1: new full speed USB device using uhci_hcd and address 3
[   61.227125] usb 1-1: khubd timed out on ep0in len=0/64
[   62.226500] usb 1-1: khubd timed out on ep0in len=0/64
[   63.225971] usb 1-1: khubd timed out on ep0in len=0/64
[   63.336706] usb 1-1: device descriptor read/64, error -110
[   68.440351] usb 1-1: khubd timed out on ep0in len=0/64
[   73.439817] usb 1-1: khubd timed out on ep0in len=0/64
[   78.438316] usb 1-1: khubd timed out on ep0in len=0/64
[   78.548442] usb 1-1: device descriptor read/64, error -110
[   78.764381] usb 1-1: new full speed USB device using uhci_hcd and address 4
[   83.764608] usb 1-1: khubd timed out on ep0out len=0/0
[   88.966984] usb 1-1: khubd timed out on ep0out len=0/0
[   89.169460] usb 1-1: device not accepting address 4, error -110
[   89.281432] usb 1-1: new full speed USB device using uhci_hcd and address 5
[   94.281304] usb 1-1: khubd timed out on ep0out len=0/0
[   99.483677] usb 1-1: khubd timed out on ep0out len=0/0
[   99.686512] usb 1-1: device not accepting address 5, error -110
[  100.070441] usbcore: registered new driver hiddev
[  100.071894] usbcore: registered new driver usbhid
[  100.071918] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[  100.211105] usbcore: registered new driver hci_usb

Dotaz: USB klavesnice: "device not accepting address"

Odpovědi