Portál AbcLinuxu, 6. listopadu 2025 16:46
[ 247.968000] ata1.01: qc timeout (cmd 0xa0) [ 247.968000] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen [ 247.968000] ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 [ 247.968000] res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout) [ 255.040000] ata1: port is slow to respond, please be patient (Status 0xd1) [ 277.968000] ata1: port failed to respond (30 secs, Status 0xd1) [ 277.968000] ata1: soft resetting port [ 278.564000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568 [ 278.628000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 195371568 [ 278.628000] ata1.00: configured for UDMA/100 [ 278.924000] ata1.01: configured for UDMA/33 [ 278.924000] ata1: EH complete [ 278.996000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 279.068000] sda: Write Protect is off [ 279.068000] sda: Mode Sense: 00 3a 00 00 [ 279.212000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 279.356000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB) [ 279.428000] sda: Write Protect is off [ 279.428000] sda: Mode Sense: 00 3a 00 00 [ 279.432000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUANeviete mi pls poradit co stym? Je to hw alebo sw problem? Dakujem _mali_
mali@mali ~$ sudo hdparm /dev/sda
/dev/sda:
IO_support = 0 (default 16-bit)
readonly = 0 (off)
readahead = 256 (on)
geometry = 12161/255/63, sectors = 195371568, start = 0
mali@mali ~$ sudo sdparm -v /dev/sda
/dev/sda: ATA ST9100825A 3.04
Request Sense cmd: 03 00 00 00 40 00
request sense: Fixed format, current; Sense key: Illegal Request
Additional sense: Invalid command operation code
REQUEST SENSE failed
Vo win sa problem nevyskytuje.
mali@mali ~$ sudo smartctl --smart=on --offlineauto=on --saveauto=on /dev/sda smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen Home page is http://smartmontools.sourceforge.net/ unable to fetch IEC (SMART) mode page [unsupported field in scsi command] A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.
zkus zapnout jen: smartctl --smart=on /dev/sda
nebo: smartctl -d ata --smart=on /dev/sda
nebo se ho rovnou zeptej na vysledek - smartctl -d ata -a /dev/sda
mali@mali ~$ sudo smartctl -d ata -a /dev/sda
smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF INFORMATION SECTION ===
Device Model: ST9100825A
Serial Number: 5PL10NAY
Firmware Version: 3.04
User Capacity: 100,030,242,816 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 6
ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2
Local Time is: Thu Aug 16 10:52:48 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 111) minutes.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 100 253 006 Pre-fail Always - 1040417
3 Spin_Up_Time 0x0003 096 095 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 491
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 22
7 Seek_Error_Rate 0x000f 075 060 030 Pre-fail Always - 38115547
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 2070
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 511
187 Unknown_Attribute 0x0032 001 001 000 Old_age Always - 4228
189 Unknown_Attribute 0x003a 100 100 000 Old_age Always - 0
190 Unknown_Attribute 0x0022 053 037 045 Old_age Always In_the_past 22381881851951
192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 405
193 Load_Cycle_Count 0x0032 083 083 000 Old_age Always - 35513
194 Temperature_Celsius 0x0022 047 063 000 Old_age Always - 47 (Lifetime Min/Max 0/13)
195 Hardware_ECC_Recovered 0x001a 083 053 000 Old_age Always - 221051286
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 1902 -
# 2 Extended offline Completed without error 00% 1900 -
# 3 Extended offline Interrupted (host reset) 80% 1898 -
# 4 Short offline Completed without error 00% 1189 -
# 5 Extended offline Interrupted (host reset) 90% 864 -
# 6 Short offline Interrupted (host reset) 40% 864 -
# 7 Extended offline Interrupted (host reset) 90% 864 -
# 8 Short offline Completed without error 00% 864 -
# 9 Short offline Completed without error 00% 862 -
#10 Short offline Completed without error 00% 729 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.