Portál AbcLinuxu, 10. května 2025 07:28
Sep 23 23:19:04 localhost pppd[2970]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:04 localhost pppoe[2971]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:04 localhost pppd[2970]: Couldn't get channel number: Input/output error Sep 23 23:19:04 localhost pppd[2970]: Exit. Sep 23 23:19:04 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:09 localhost pppd[2981]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:09 localhost pppd[2981]: Using interface ppp0 Sep 23 23:19:09 localhost pppd[2981]: Connect: ppp0 <--> /dev/pts/3 Sep 23 23:19:09 localhost pppoe[2982]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:09 localhost pppd[2981]: Modem hangup Sep 23 23:19:09 localhost pppd[2981]: Connection terminated. Sep 23 23:19:09 localhost pppd[2981]: Exit. Sep 23 23:19:09 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:14 localhost pppd[3004]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:14 localhost pppoe[3005]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:14 localhost pppd[3004]: Couldn't get channel number: Input/output error Sep 23 23:19:14 localhost pppd[3004]: Exit. Sep 23 23:19:14 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:19 localhost pppd[3019]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:19 localhost pppoe[3020]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:19 localhost pppd[3019]: Couldn't get channel number: Input/output error Sep 23 23:19:19 localhost pppd[3019]: Exit. Sep 23 23:19:19 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:24 localhost pppd[3035]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:24 localhost pppd[3035]: Using interface ppp0 Sep 23 23:19:24 localhost pppd[3035]: Connect: ppp0 <--> /dev/pts/3 Sep 23 23:19:25 localhost pppoe[3036]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:25 localhost pppd[3035]: Modem hangup Sep 23 23:19:25 localhost pppd[3035]: Connection terminated. Sep 23 23:19:25 localhost pppd[3035]: Exit. Sep 23 23:19:25 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:30 localhost pppd[3058]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:30 localhost pppoe[3059]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:30 localhost pppd[3058]: Couldn't get channel number: Input/output error Sep 23 23:19:30 localhost pppd[3058]: Exit. Sep 23 23:19:30 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:35 localhost pppd[3073]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:35 localhost pppoe[3074]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:35 localhost pppd[3073]: Couldn't get channel number: Input/output error Sep 23 23:19:35 localhost pppd[3073]: Exit. Sep 23 23:19:35 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:40 localhost pppd[3084]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:40 localhost pppd[3084]: Using interface ppp0 Sep 23 23:19:40 localhost pppd[3084]: Connect: ppp0 <--> /dev/pts/3 Sep 23 23:19:40 localhost pppoe[3085]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:40 localhost pppd[3084]: Modem hangup Sep 23 23:19:40 localhost pppd[3084]: Connection terminated. Sep 23 23:19:40 localhost pppd[3084]: Exit. Sep 23 23:19:40 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:45 localhost pppd[3108]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:45 localhost pppoe[3109]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:45 localhost pppd[3108]: Couldn't get channel number: Input/output error Sep 23 23:19:45 localhost pppd[3108]: Exit. Sep 23 23:19:45 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:50 localhost pppd[3123]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:50 localhost pppoe[3124]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:50 localhost pppd[3123]: Couldn't get channel number: Input/output error Sep 23 23:19:50 localhost pppd[3123]: Exit. Sep 23 23:19:50 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:19:55 localhost pppd[3139]: pppd 2.4.3 started by root, uid 0 Sep 23 23:19:55 localhost pppd[3139]: Using interface ppp0 Sep 23 23:19:55 localhost pppd[3139]: Connect: ppp0 <--> /dev/pts/3 Sep 23 23:19:55 localhost pppoe[3140]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:19:55 localhost pppd[3139]: Modem hangup Sep 23 23:19:55 localhost pppd[3139]: Connection terminated. Sep 23 23:19:55 localhost pppd[3139]: Exit. Sep 23 23:19:55 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:20:00 localhost pppd[3162]: pppd 2.4.3 started by root, uid 0 Sep 23 23:20:00 localhost pppoe[3163]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:20:00 localhost pppd[3162]: Couldn't get channel number: Input/output error Sep 23 23:20:00 localhost pppd[3162]: Exit. Sep 23 23:20:00 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 23 23:20:05 localhost pppd[3177]: pppd 2.4.3 started by root, uid 0 Sep 23 23:20:06 localhost pppoe[3178]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 23 23:20:06 localhost pppd[3177]: Couldn't get channel number: Input/output error Sep 23 23:20:06 localhost pppd[3177]: Exit. Sep 23 23:20:06 localhost adsl-connect: ADSL connection lost; attempting re-connection.Kde jsem udělal chybu? Možná v editace adsl-setup...nebo někde jinde? Díky!
Sep 24 15:38:15 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 2
Sep 24 15:38:15 localhost kernel: usb 3-2: configuration #1 chosen from 1 choice
Sep 24 15:38:15 localhost kernel: NET: Registered protocol family 8
Sep 24 15:38:15 localhost kernel: NET: Registered protocol family 20
Sep 24 15:38:17 localhost kernel: usbcore: registered new driver cxacru
Sep 24 15:38:18 localhost kernel: cxacru 3-2:1.0: found firmware cxacru-fw.bin
Sep 24 15:38:18 localhost kernel: audit(1190641098.228:9): avc: denied { getattr } for pid=2373 comm="pam_console_app" name="003" dev=tmpfs ino=4401 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c255 tcontext=system_u:object_r:usb_device_t:s0 tclass=chr_file
Sep 24 15:38:18 localhost firmware_helper[2376]: Loading of /lib/firmware/cxacru-cf.bin for cxacru driver failed: No such file or directory
Sep 24 15:38:34 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 24 15:38:44 localhost kernel: ATM dev 0: ADSL line: down
Sep 24 15:38:49 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 24 15:38:54 localhost kernel: ATM dev 0: ADSL line: down
Sep 24 15:38:59 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 24 15:40:22 localhost automount[2406]: >> /usr/sbin/showmount: can't get address for .directory
Sep 24 15:40:22 localhost automount[2406]: lookup(program): lookup for .directory failed
Sep 24 15:40:22 localhost automount[2406]: failed to mount /net/.directory
Sep 24 15:40:30 localhost kernel: ATM dev 0: ADSL line: down
Sep 24 15:40:35 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 24 15:41:35 localhost kernel: ATM dev 0: ADSL line: down
Sep 24 15:41:40 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 24 15:41:50 localhost kernel: ATM dev 0: ADSL line: down
Sep 24 15:42:04 localhost automount[2477]: >> /usr/sbin/showmount: can't get address for .directory
Sep 24 15:42:04 localhost automount[2477]: lookup(program): lookup for .directory failed
Sep 24 15:42:04 localhost automount[2477]: failed to mount /net/.directory
Sep 24 15:42:05 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 24 15:42:08 localhost automount[2485]: >> /usr/sbin/showmount: can't get address for .directory
Sep 24 15:42:08 localhost automount[2485]: lookup(program): lookup for .directory failed
Sep 24 15:42:08 localhost automount[2485]: failed to mount /net/.directory
Sep 24 15:42:15 localhost kernel: ATM dev 0: ADSL line: down
Není to tím, že jsem podle návodu dal nas0? Nemá tam skutečně být eth0?
Sep 24 15:38:18 localhost kernel: audit(1190641098.228:9): avc: denied { getattr } for pid=2373 comm="pam_console_app" name="003" dev=tmpfs ino=4401 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c255 tcontext=system_u:object_r:usb_device_t:s0 tclass=chr_file
, můžete zkusit vypnout selinux?
echo 0 >/selinux/enforce a připojit znovu ten modem.
Sep 25 11:04:10 localhost kernel: audit(1190711050.210:10): avc: granted { setenforce } for pid=2411 comm="bash" scontext=user_u:system_r:unconfined_t:s0-s0:c0.c255 tcontext=system_u:object_r:security_t:s0 tclass=security
Sep 25 11:05:09 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 2
Sep 25 11:05:09 localhost kernel: usb 3-2: configuration #1 chosen from 1 choice
Sep 25 11:05:09 localhost kernel: NET: Registered protocol family 8
Sep 25 11:05:09 localhost kernel: NET: Registered protocol family 20
Sep 25 11:05:11 localhost kernel: usbcore: registered new driver cxacru
Sep 25 11:05:11 localhost kernel: cxacru 3-2:1.0: found firmware cxacru-fw.bin
Sep 25 11:05:12 localhost kernel: audit(1190711112.010:11): avc: denied { getattr } for pid=2454 comm="pam_console_app" name="003" dev=tmpfs ino=4112 scontext=system_u:system_r:pam_console_t:s0-s0:c0.c255 tcontext=system_u:object_r:usb_device_t:s0 tclass=chr_file
Sep 25 11:05:12 localhost firmware_helper[2457]: Loading of /lib/firmware/cxacru-cf.bin for cxacru driver failed: No such file or directory
Sep 25 11:05:28 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 25 11:05:38 localhost kernel: ATM dev 0: ADSL line: down
Sep 25 11:05:43 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 25 11:05:48 localhost kernel: ATM dev 0: ADSL line: down
Sep 25 11:05:53 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 25 11:07:23 localhost kernel: ATM dev 0: ADSL line: down
Sep 25 11:07:28 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 25 11:08:28 localhost kernel: ATM dev 0: ADSL line: down
Sep 25 11:08:34 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 25 11:08:42 localhost automount[2509]: >> /usr/sbin/showmount: can't get address for .directory
Sep 25 11:08:42 localhost automount[2509]: lookup(program): lookup for .directory failed
Sep 25 11:08:42 localhost automount[2509]: failed to mount /net/.directory
Sep 25 11:08:44 localhost kernel: ATM dev 0: ADSL line: down
Sep 25 11:08:59 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 25 11:09:09 localhost kernel: ATM dev 0: ADSL line: down
Sep 25 11:09:19 localhost kernel: ATM dev 0: ADSL line: attempting to activate
Sep 25 11:09:29 localhost kernel: ATM dev 0: ADSL line: down
Mám ještě jeden poznatek: když jsem (na tom samém pc, kde mám Fedoru) ve WinXP připojený k internetu a počtíač restartuji do Fedory, na modemu i ve Fedoře svítí (a už nebliká) také druhá dioda ("Link").
Když mám ale pc vypnuté a nastartuji jej do Fedory, druhá dioda pouze bliká (asi, jak se snaží připojit).
Furt to tam otravuje (to selinux) ještě to zkuste nabootovat s přidáním parametru "selinux=0"Tady to je:
Sep 25 16:01:08 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 2 Sep 25 16:01:09 localhost kernel: usb 3-2: configuration #1 chosen from 1 choice Sep 25 16:01:09 localhost kernel: NET: Registered protocol family 8 Sep 25 16:01:09 localhost kernel: NET: Registered protocol family 20 Sep 25 16:01:11 localhost kernel: usbcore: registered new driver cxacru Sep 25 16:01:11 localhost kernel: cxacru 3-2:1.0: found firmware cxacru-fw.bin Sep 25 16:01:11 localhost firmware_helper[2303]: Loading of /lib/firmware/cxacru-cf.bin for cxacru driver failed: No such file or directory Sep 25 16:01:28 localhost kernel: ATM dev 0: ADSL line: attempting to activate Sep 25 16:01:38 localhost kernel: ATM dev 0: ADSL line: down Sep 25 16:01:43 localhost kernel: ATM dev 0: ADSL line: attempting to activate Sep 25 16:01:48 localhost kernel: ATM dev 0: ADSL line: down Sep 25 16:01:53 localhost kernel: ATM dev 0: ADSL line: attempting to activate Sep 25 16:03:09 localhost automount[2350]: >> /usr/sbin/showmount: can't get address for .directory Sep 25 16:03:09 localhost automount[2350]: lookup(program): lookup for .directory failed Sep 25 16:03:09 localhost automount[2350]: failed to mount /net/.directory
lsmod
Nemám již přístup k tomu modemu, tak nedokáži porovnat log. Ale vypadá to, jako by se neprovedl ten řádek v modprobe.conf, taky by jste mohl zkusit ručne pustit:
/sbin/modprobe br2684 /user/sbin/br2684ctl -b -e 0 -c 0 -a 0.8.48 /sbin/ifconfig nas0 192.168.1.138 netmask 255.255.255.0 up
je zaveden modul br2684 ?Mám to zkusit spustit těsně před tím, než připojím modem?lsmodNemám již přístup k tomu modemu, tak nedokáži porovnat log. Ale vypadá to, jako by se neprovedl ten řádek v modprobe.conf, taky by jste mohl zkusit ručne pustit:/sbin/modprobe br2684 /user/sbin/br2684ctl -b -e 0 -c 0 -a 0.8.48 /sbin/ifconfig nas0 192.168.1.138 netmask 255.255.255.0 up
[martin@localhost ~]$ /sbin/modprobe br2684 [martin@localhost ~]$ /user/sbin/br2684ctl -b -e 0 -c 0 -a 0.8.48 bash: /user/sbin/br2684ctl: není souborem ani adresářem [martin@localhost ~]$ /sbin/ifconfig nas0 192.168.1.138 netmask 255.255.255.0 up SIOCSIFADDR: Přístup odmítnut nas0: rozhraní Takové zařízení neexistuje není známo SIOCSIFNETMASK: Přístup odmítnut SIOCGIFADDR: Takové zařízení neexistuje SIOCSIFBROADCAST: Přístup odmítnut nas0: rozhraní Takové zařízení neexistuje není známo
yum install linux-atmyum install linux-atma vše proběhlo ok.
/sbin/modprobe br2684 /usr/sbin/br2684ctl -b -e 0 -c 0 -a 0.8.48 /sbin/ifconfig nas0 192.168.1.138 netmask 255.255.255.0 up
/sbin/modprobe br2684Výpis logu:
/usr/sbin/br2684ctl -b -e 0 -c 0 -a 0.8.48
/sbin/ifconfig nas0 192.168.1.138 netmask 255.255.255.0 up
Sep 25 18:10:05 localhost kernel: usb 3-2: new full speed USB device using uhci_hcd and address 2 Sep 25 18:10:05 localhost kernel: usb 3-2: configuration #1 chosen from 1 choice Sep 25 18:10:05 localhost kernel: NET: Registered protocol family 8 Sep 25 18:10:05 localhost kernel: NET: Registered protocol family 20 Sep 25 18:10:07 localhost kernel: usbcore: registered new driver cxacru Sep 25 18:10:08 localhost kernel: cxacru 3-2:1.0: found firmware cxacru-fw.bin Sep 25 18:10:08 localhost firmware_helper[2326]: Loading of /lib/firmware/cxacru-cf.bin for cxacru driver failed: No such file or directory Sep 25 18:10:24 localhost kernel: ATM dev 0: ADSL line: attempting to activate Sep 25 18:10:30 localhost br2684ctl[2348]: Interface "nas0" created sucessfully Sep 25 18:10:30 localhost br2684ctl[2348]: Communicating over ATM 0.8.48, encapsulation: LLC Sep 25 18:10:30 localhost br2684ctl[2348]: Interface configured Sep 25 18:10:30 localhost br2684ctl[2362]: RFC 1483/2684 bridge daemon started Sep 25 18:10:34 localhost kernel: ATM dev 0: ADSL line: down Sep 25 18:10:39 localhost kernel: ATM dev 0: ADSL line: attempting to activate Sep 25 18:10:41 localhost avahi-daemon[1940]: New relevant interface nas0.IPv4 for mDNS. Sep 25 18:10:41 localhost avahi-daemon[1940]: Joining mDNS multicast group on interface nas0.IPv4 with address 192.168.1.138. Sep 25 18:10:41 localhost avahi-daemon[1940]: Registering new address record for 192.168.1.138 on nas0. Sep 25 18:10:44 localhost kernel: ATM dev 0: ADSL line: down Sep 25 18:10:49 localhost kernel: ATM dev 0: ADSL line: attempting to activate
To už vypadá dobře, jaké máte nastavení VPI/VCI (předpokládám, že ve windows to chodí, tak tam by ty čísla měly být v pořádku) toto je pro VPI=8 a VCI=48...Skutečně (i podle Win) mám 8/48.
...jinak se musí upravit parametr toho br2684ctl...Teď Vám nerozumím: jaký parametr?
...myslím si, že pokud se opraví ten překlep i v tom /etc/modprobe.conf tak by mělo to ADSL naběhnout automaticky ...Díval jsem se na Váš návod, ale žádný překlep u řádku, který se má vložit do modprobe.conf nevídím (místo špatného "user" tam je "usr" - tak to má být, ne?). Který překlep máte na mysli?
adsl-setup, snad jsem správně nakonfiguroval připojení (zadal jsem nas0, jméno, heslo, DNS servery, firewall jsem zatím nastavil na "0"). Následně jsem dal adsl-start. No a tady je výpis:
Sep 25 19:28:01 localhost pppd[3301]: pppd 2.4.3 started by root, uid 0 Sep 25 19:28:01 localhost pppoe[3302]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 25 19:28:01 localhost pppd[3301]: Couldn't get channel number: Input/output error Sep 25 19:28:01 localhost pppd[3301]: Exit. Sep 25 19:28:01 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 25 19:28:06 localhost pppd[3312]: pppd 2.4.3 started by root, uid 0 Sep 25 19:28:06 localhost pppd[3312]: Using interface ppp0 Sep 25 19:28:06 localhost pppd[3312]: Connect: ppp0 <--> /dev/pts/3 Sep 25 19:28:06 localhost pppoe[3313]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 25 19:28:06 localhost pppd[3312]: Modem hangup Sep 25 19:28:06 localhost pppd[3312]: Connection terminated. Sep 25 19:28:06 localhost pppd[3312]: Exit. Sep 25 19:28:06 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 25 19:28:11 localhost pppd[3335]: pppd 2.4.3 started by root, uid 0 Sep 25 19:28:11 localhost pppoe[3336]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 25 19:28:11 localhost pppd[3335]: Couldn't get channel number: Input/output error Sep 25 19:28:11 localhost pppd[3335]: Exit. Sep 25 19:28:11 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 25 19:28:16 localhost pppd[3350]: pppd 2.4.3 started by root, uid 0 Sep 25 19:28:16 localhost pppoe[3351]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 25 19:28:16 localhost pppd[3350]: Couldn't get channel number: Input/output error Sep 25 19:28:16 localhost pppd[3350]: Exit. Sep 25 19:28:16 localhost adsl-connect: ADSL connection lost; attempting re-connection. Sep 25 19:28:21 localhost pppd[3366]: pppd 2.4.3 started by root, uid 0 Sep 25 19:28:21 localhost pppd[3366]: Using interface ppp0 Sep 25 19:28:21 localhost pppd[3366]: Connect: ppp0 <--> /dev/pts/3 Sep 25 19:28:21 localhost pppoe[3367]: ioctl(SIOCGIFHWADDR): Session 0: No such device Sep 25 19:28:21 localhost pppd[3366]: Modem hangup Sep 25 19:28:21 localhost pppd[3366]: Connection terminated. Sep 25 19:28:22 localhost pppd[3366]: Exit.
lsmod jestli tam bude ten modul br2684 a potom ifconfig jestli je korektně nastavené rozhraní nas0.
lsmod a ifconfig.
[root@localhost ~]# lsmod
Module Size Used by
ppp_synctty 10433 0
ppp_async 11841 1
crc_ccitt 2241 1 ppp_async
ppp_generic 28373 2 ppp_synctty,ppp_async
slhc 6593 1 ppp_generic
ppdev 8645 0
autofs4 19013 1
hidp 15937 2
rfcomm 34517 0
l2cap 23617 10 hidp,rfcomm
bluetooth 44069 5 hidp,rfcomm,l2cap
sunrpc 136573 1
ip_conntrack_ftp 7601 0
ip_conntrack_netbios_ns 3009 0
ipt_REJECT 5441 1
xt_state 2241 9
ip_conntrack 49261 3 ip_conntrack_ftp,ip_conntrack_netbios_ns,xt_state
nfnetlink 6489 1 ip_conntrack
xt_tcpudp 3265 11
iptable_filter 3137 1
ip_tables 11657 1 iptable_filter
x_tables 12613 4 ipt_REJECT,xt_state,xt_tcpudp,ip_tables
video 14917 0
button 6609 0
battery 9285 0
ac 4933 0
ipv6 225569 12
br2684 8773 0
lp 12297 0
parport_pc 25445 1
parport 34313 3 ppdev,lp,parport_pc
cxacru 11713 0
usbatm 18241 1 cxacru
floppy 57733 0
atm 37877 2 br2684,usbatm
nvram 8393 0
uhci_hcd 28881 0
ehci_hcd 29005 0
e100 33093 0
mii 5313 1 e100
snd_intel8x0 30301 0
snd_ac97_codec 83937 1 snd_intel8x0
snd_ac97_bus 2497 1 snd_ac97_codec
snd_cmipci 32737 0
gameport 15177 1 snd_cmipci
snd_opl3_lib 10305 1 snd_cmipci
snd_hwdep 9541 1 snd_opl3_lib
snd_mpu401_uart 7873 1 snd_cmipci
snd_rawmidi 24001 1 snd_mpu401_uart
snd_seq_dummy 3781 0
snd_seq_oss 28993 0
snd_seq_midi_event 7105 1 snd_seq_oss
snd_seq 47153 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
i2c_i801 8397 0
hw_random 5849 0
snd_seq_device 8909 5 snd_opl3_lib,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
i2c_core 20673 1 i2c_i801
snd_pcm_oss 45009 0
snd_mixer_oss 16449 1 snd_pcm_oss
snd_pcm 76869 4 snd_intel8x0,snd_ac97_codec,snd_cmipci,snd_pcm_oss
snd_timer 22597 3 snd_opl3_lib,snd_seq,snd_pcm
snd 50501 14 snd_intel8x0,snd_ac97_codec,snd_cmipci,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9377 1 snd
snd_page_alloc 10441 2 snd_intel8x0,snd_pcm
dm_snapshot 15981 0
dm_zero 2113 0
dm_mirror 19729 0
dm_mod 50009 6 dm_snapshot,dm_zero,dm_mirror
ext3 116169 2
jbd 52693 1 ext3
[root@localhost ~]# ifconfig
lo Link encap:Místní smyčka
inet adr:127.0.0.1 Maska:255.0.0.0
inet6-adr: ::1/128 Rozsah:Počítač
AKTIVOVÁNO SMYČKA BĚŽÍ MTU:16436 Metrika:1
RX packets:2294 errors:0 dropped:0 overruns:0 frame:0
TX packets:2294 errors:0 dropped:0 overruns:0 carrier:0
kolizí:0 délka odchozí fronty:0
RX bytes:3409427 (3.2 MiB) TX bytes:3409427 (3.2 MiB)
nas0 Link encap:Ethernet HWadr 00:00:00:00:00:00
inet6-adr: fe80::200:ff:fe00:0/64 Rozsah:Linka
AKTIVOVÁNO VŠESMĚROVÉ_VYSÍLÁNÍ BĚŽÍ MULTICAST MTU:1500 Metrika:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:17 dropped:0 overruns:0 carrier:17
kolizí:0 délka odchozí fronty:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
/sbin/ifconfig nas0 192.168.1.138 netmask 255.255.255.0 upvypadá to, že není nastavené to rozhraní nas0
/usr/sbin/br2684ctl -b -e 0 -c 0 -a 0.8.48jestli to proběhne korektně, nebo to napíše nějakou blbost.
adsl-start a jede to. Ještě zkusím zkuste dát+ návod ve Vašem dalším příspěvku a dám vědět. Jinak Vám moc děkuju za pomoc!/sbin/ifconfig nas0 192.168.1.138 netmask 255.255.255.0 upvypadá to, že není nastavené to rozhraní nas0
Loading of /lib/firmware/cxacru-cf.bin for cxacru driver failed: No such file or directory
Existuje vôbec ten súbor na disku?
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.