Dotaz: pridanie ubuntu do grubu

[Palo]

mam opensuse 10.3 a windows XP, nainstaloval som si este aj ubuntu 7.10 bez grubu. grub mam povodny s opensuse. Skusal som pridat ubuntu to grubu cez yast ale nijak mi to nejde,po restarte,ked zvolim ubuntu,tak nacita kernel aj initrd ale potom zostane cierna obrazovka. nevie niekto ako by som to rozbehal? vypis akeho suboru este potrebujete?

Odpovědi

[Palo]

mozno vam pomoze vypis menu.lst:

# Modified by YaST2. Last modification on Mon Oct 22 17:19:38 CEST 2007 default 0 timeout 8 gfxmenu (hd1,1)/boot/message

###Don't change this comment - YaST2 identifier: Original name: linux###

title openSUSE 10.3

root (hd1,1)

kernel /boot/vmlinuz-2.6.22.5-31-default

root=/dev/disk/by-id/scsi-SATA_ST320011A_3HT0N1GN-part2 vga=0x31a

resume=/dev/sdb1 splash=silent showopts

initrd /boot/initrd-2.6.22.5-31-default

title Ubuntu 7.10 Gutsy Gibbon

root (hd2,1)

kernel /vmlinuz

root=/dev/disk/by-id/scsi-SATA_ST360021A_3HR0GZCC-part2 vga=0x31a

resume=/dev/sdc2

initrd /initrd.img

###Don't change this comment - YaST2 identifier: Original name: windows 1###

title Windows XP Professional

rootnoverify (hd1,1)

chainloader (hd0,0)+1

[bobyx]

skuste si upravit tieto polzky v /boot/grub/menu.lst asi takto:
kernel		/vmlinuz-2.6.22-12-xxxxxx
initrd		/initrd.img-2.6.22-12-xxxxxx
quiet

za tie xxxx si dajte svoju verziu kernelu v ubuntu,a restartnite

[Palo]

kernel je iba odkaz v root folderi na ten subor vmlinuz-2.6.22.14-generic v /boot/, takze ty by bolo to iste, ale uz sa mi podarilo rozbehat pri nacitani splash screen ale zamrzne mi pri: Waiting for root file system...

a teraz neviem co s tym lebo file system je tam dobre uvedeny

[bobyx]

asi by bol najprv lepsi vypis z fdisk -l
a potom z /etc/fstab

[Palo]

toto je ten fdisk -l:

Disk /dev/sda: 20.0 GB, 20020396032 bytes

255 heads, 63 sectors/track, 2434 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk identifier: 0x183b1fa1

Device Boot Start End Blocks Id System

/dev/sda1 * 1 2433 19543041 7 HPFS/NTFS

Disk /dev/sdb: 20.0 GB, 20020396032 bytes

255 heads, 63 sectors/track, 2434 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk identifier: 0xc0214076

Device Boot Start End Blocks Id System

/dev/sdb1 1 124 995998+ 82 Linux swap / Solaris

/dev/sdb2 125 2434 18555075 83 Linux

Disk /dev/sdc: 60.0 GB, 60022480896 bytes

255 heads, 63 sectors/track, 7297 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Disk identifier: 0xff70ff70

Device Boot Start End Blocks Id System

/dev/sdc1 1 4865 39078081 7 HPFS/NTFS

/dev/sdc2 4866 7297 19535040 83 Linux

[Palo]

a toto fstab:

/dev/disk/by-id/scsi-SATA_ST320011A_3HT0N1GN-part2 / reiserfs acl,user_xattr 1 1

/dev/disk/by-id/scsi-SATA_ST360021A_3HR0GZCC-part1 /data/media ntfs-3g noatime,user,users,gid=users,fmask=111,dmask=000,locale=en_US.UTF-8 0 0

/dev/disk/by-id/scsi-SATA_ST320011A_3HT1M77S-part1 /data/win_xp ntfs-3g noatime,user,users,gid=users,fmask=111,dmask=000,locale=en_US.UTF-8 0 0

/dev/disk/by-id/scsi-SATA_ST320011A_3HT0N1GN-part1 swap swap defaults 0 0

proc /proc proc defaults 0 0

sysfs /sys sysfs noauto 0 0

debugfs /sys/kernel/debug debugfs noauto 0 0

usbfs /proc/bus/usb usbfs noauto 0 0

devpts /dev/pts devpts mode=0620,gid=5 0 0

/dev/fd0 /media/floppy auto noauto,user,sync 0 0

/dev/disk/by-id/scsi-SATA_ST360021A_3HR0GZCC-part2 /data/ubuntu ext3 defaults 1 2

[Palo]

no uz som to vyriesil, nie sice tak ako som chcel ale vsetko ide tak budis....pouzil som grub s ubuntu ;)