Portál AbcLinuxu, 16. července 2025 19:41
panasonic dmc-tz1, který vždy fungoval perfektně jako mass storage. Zkusil jsem ho připojit zase a nic, skončil jsem na
Dec 9 12:13:04 linwood usb 1-2: new full speed USB device using uhci_hcd and address 4 Dec 9 12:13:04 linwood usb 1-2: configuration #1 chosen from 1 choice Dec 9 12:13:04 linwood scsi7 : SCSI emulation for USB Mass Storage devices Dec 9 12:13:04 linwood usb-storage: device found at 4 Dec 9 12:13:04 linwood usb-storage: waiting for device to settle before scanningMyslel jsem, že jsem něco přehlédl při konfiguraciu kernelu, ale zajímavé však je, že když fotoaparát zapnu předtím, než naběhne KDE, tak se zařízení vytvoří bez problémů. Zkoušel jsem killovat jednotlivé aplikace, které se při startu KDE spouští, ale buď to nepomáhalo nebo jsem sestřelil celé KDE. Udevmonitor mi v KDE vypíše
# udevmonitor udevmonitor will print the received events for: UDEV the event which udev sends out after rule processing UEVENT the kernel uevent UEVENT[1197199786.114991] add /devices/pci0000:00/0000:00:10.0/usb1/1-2 (usb) UEVENT[1197199786.115056] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/usb_endpoint/usbdev1.5_ep00 (usb_endpoint) UEVENT[1197199786.120158] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0 (usb) UDEV [1197199786.128207] add /devices/pci0000:00/0000:00:10.0/usb1/1-2 (usb) UDEV [1197199786.130205] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/usb_endpoint/usbdev1.5_ep00 (usb_endpoint) UEVENT[1197199786.130957] add /class/scsi_host/host8 (scsi_host) UEVENT[1197199786.135612] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.5_ep01 (usb_endpoint) UEVENT[1197199786.135659] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.5_ep82 (usb_endpoint) UDEV [1197199786.207522] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0 (usb) UDEV [1197199786.208857] add /class/scsi_host/host8 (scsi_host) UDEV [1197199786.216198] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.5_ep01 (usb_endpoint) UDEV [1197199786.222302] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.5_ep82 (usb_endpoint) UEVENT[1197199787.108598] remove /class/scsi_host/host8 (scsi_host) UDEV [1197199787.110338] remove /class/scsi_host/host8 (scsi_host)V konzoli, když KDE neběží, mi to ale vypíše
udevmonitor will print the received events for: UDEV the event which udev sends out after rule processing UEVENT the kernel uevent UEVENT[1197199941.854391] add /devices/pci0000:00/0000:00:10.0/usb1/1-2 (usb) UEVENT[1197199941.854430] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/usb_endpoint/usbdev1.6_ep00 (usb_endpoint) UEVENT[1197199941.854437] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0 (usb) UDEV [1197199941.857974] add /devices/pci0000:00/0000:00:10.0/usb1/1-2 (usb) UDEV [1197199941.859691] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/usb_endpoint/usbdev1.6_ep00 (usb_endpoint) UEVENT[1197199941.860169] add /class/scsi_host/host9 (scsi_host) UEVENT[1197199941.864499] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.6_ep01 (usb_endpoint) UEVENT[1197199941.864530] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.6_ep82 (usb_endpoint) UDEV [1197199941.877018] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0 (usb) UDEV [1197199941.878562] add /class/scsi_host/host9 (scsi_host) UDEV [1197199941.879860] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.6_ep01 (usb_endpoint) UDEV [1197199941.881127] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.6_ep82 (usb_endpoint) UEVENT[1197199946.868898] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/host9/target9:0:0/9:0:0:0 (scsi) UEVENT[1197199946.868979] add /class/scsi_disk/9:0:0:0 (scsi_disk) UDEV [1197199946.877969] add /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/host9/target9:0:0/9:0:0:0 (scsi) UDEV [1197199946.879591] add /class/scsi_disk/9:0:0:0 (scsi_disk) UEVENT[1197199946.902451] add /block/sde (block) UEVENT[1197199946.902471] add /block/sde/sde1 (block) UEVENT[1197199946.902477] add /class/scsi_device/9:0:0:0 (scsi_device) UEVENT[1197199946.902482] add /class/scsi_generic/sg5 (scsi_generic) UDEV [1197199946.912157] add /class/scsi_generic/sg5 (scsi_generic) UDEV [1197199946.913029] add /class/scsi_device/9:0:0:0 (scsi_device) UDEV [1197199947.198128] add /block/sde (block) UDEV [1197199947.552087] add /block/sde/sde1 (block)Používám gentoo ~86.
# udevtest /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.4_ep82 This program is for debugging only, it does not run any program, specified by a RUN key. It may show incorrect results, because some values may be different, or not available at a simulation run. parse_file: reading '/etc/udev/rules.d/05-udev-early.rules' as rules file parse_file: reading '/etc/udev/rules.d/10-local.rules' as rules file parse_file: reading '/dev/.udev/rules.d/10-root-link.rules' as rules file parse_file: reading '/etc/udev/rules.d/30-kernel-compat.rules' as rules file parse_file: reading '/etc/udev/rules.d/30-svgalib.rules' as rules file parse_file: reading '/etc/udev/rules.d/40-alsa.rules' as rules file parse_file: reading '/etc/udev/rules.d/40-fuse.rules' as rules file parse_file: reading '/etc/udev/rules.d/40-gentoo.rules' as rules file parse_file: reading '/etc/udev/rules.d/40-video.rules' as rules file parse_file: reading '/etc/udev/rules.d/50-udev-default.rules' as rules file parse_file: reading '/etc/udev/rules.d/60-cdrom_id.rules' as rules file parse_file: reading '/etc/udev/rules.d/60-persistent-input.rules' as rules file parse_file: reading '/etc/udev/rules.d/60-persistent-storage-tape.rules' as rules file parse_file: reading '/etc/udev/rules.d/60-persistent-storage.rules' as rules file parse_file: reading '/etc/udev/rules.d/61-persistent-storage-edd.rules' as rules file parse_file: reading '/etc/udev/rules.d/64-device-mapper.rules' as rules file parse_file: reading '/etc/udev/rules.d/65-permissions.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-bluetooth-pcmcia.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-bluetooth.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-cd.rules' as rules file parse_file: reading '/etc/udev/rules.d/70-persistent-net.rules' as rules file parse_file: reading '/etc/udev/rules.d/75-cd-aliases-generator.rules' as rules file parse_file: reading '/etc/udev/rules.d/75-persistent-net-generator.rules' as rules file parse_file: reading '/etc/udev/rules.d/80-drivers.rules' as rules file parse_file: reading '/etc/udev/rules.d/90-hal.rules' as rules file parse_file: reading '/etc/udev/rules.d/90-network.rules' as rules file parse_file: reading '/etc/udev/rules.d/95-udev-late.rules' as rules file parse_file: reading '/etc/udev/rules.d/99-fuse.rules' as rules file parse_file: reading '/etc/udev/rules.d/99-libgphoto2.rules' as rules file import_uevent_var: import into environment: 'MAJOR=253' import_uevent_var: import into environment: 'MINOR=22' udevtest: looking at device '/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.4_ep82' from subsystem 'usb_endpoint' udev_rules_get_name: no node name set, will use kernel name 'usbdev1.4_ep82' udev_db_get_device: found a symlink as db file udev_device_event: device '/devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0/usb_endpoint/usbdev1.4_ep82' already in database, cleanup udev_node_add: creating device node '/dev/usbdev1.4_ep82', major=253, minor=22, mode=0660, uid=0, gid=0 udevtest: run: 'socket:/org/freedesktop/hal/udev_event' udevtest: run: 'socket:/org/kernel/udev/monitor'Zkusil jsem
# mknod /dev/cam1 b 253 22 # mount /dev/cam1 /mnt/loop/ mount: /dev/cam1 není platným blokovým zařízením, ale nepochodil jsem.
KDED a do toho si otevřeš media:/, tak se tam foťák neobjeví?
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.