Portál AbcLinuxu, 12. května 2025 06:50
mam problem rozchodit 2xsata RAID radic Silicon Image SiI 3512A v PCI slotu.
Detekce s modulem sata_sil probehne v poradku:
Feb 1 09:43:10 scsi2 : sata_sil
Feb 1 09:43:10 scsi3 : sata_sil
Feb 1 09:43:10 ata1: SATA max UDMA/100 mmio m512@0xdffffe00 tf 0xdffffe80 irq 11
Feb 1 09:43:10 ata2: SATA max UDMA/100 mmio m512@0xdffffe00 tf 0xdffffec0 irq 11
Feb 1 09:43:10 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 1 09:43:10 ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-10, max UDMA7
Feb 1 09:43:10 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 1 09:43:10 ata1.00: configured for UDMA/100
Feb 1 09:43:10 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 1 09:43:10 ata2.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
Feb 1 09:43:10 ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
Feb 1 09:43:10 ata2.00: configured for UDMA/100
Feb 1 09:43:10 scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
Feb 1 09:43:10 scsi 2:0:0:0: Attached scsi generic sg0 type 0
Feb 1 09:43:10 scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD501LJ CR10 PQ: 0 ANSI: 5
Feb 1 09:43:10 scsi 3:0:0:0: Attached scsi generic sg1 type 0
Feb 1 09:45:11 KarezNet-Server ata2: port is slow to respond, please be patient (Status 0xff)
Feb 1 09:45:15 ata2: device not ready (errno=-16), forcing hardreset
Feb 1 09:45:15 ata2: hard resetting link
Feb 1 09:45:16 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 1 09:45:16 ata2.00: configured for UDMA/66
Feb 1 09:45:16 ata2: EH complete
Feb 1 09:45:16 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 1 09:45:16 sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Feb 1 09:45:16 sd 3:0:0:0: [sdb] Write Protect is off
Feb 1 09:45:16 sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Feb 1 09:45:16 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 1 09:45:16 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
Feb 1 09:45:16 ata2.00: cmd c8/00:00:3f:16:00/00:00:00:00:00/e0 tag 0 dma 131072 in
Feb 1 09:45:16 res ff/ff:ff:ff:ff:ff/ff:ff:ff:ff:ff/ff Emask 0x2 (HSM violation)
Feb 1 09:45:16 ata2.00: status: { Busy }
Feb 1 09:45:16 ata2.00: error: { ICRC UNC IDNF ABRT }
Feb 1 09:45:21 ata2: port is slow to respond, please be patient (Status 0xff)
Feb 1 09:45:26 ata2: device not ready (errno=-16), forcing hardreset
Feb 1 09:45:26 ata2: hard resetting link
Feb 1 09:45:27 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
Feb 1 09:45:27 ata2.00: configured for UDMA/66
Feb 1 09:45:27 ata2: EH complete
Feb 1 09:45:27 sd 3:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
Feb 1 09:45:27 sd 3:0:0:0: [sdb] Write Protect is off
Feb 1 09:45:27 sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
Feb 1 09:45:27 sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Feb 1 09:45:27 ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
Feb 1 09:45:27 ata2.00: BMDMA2 stat 0x6d0009
Feb 1 09:45:27 ata2.00: cmd c8/00:00:3f:1e:00/00:00:00:00:00/e0 tag 0 dma 131072 in
Feb 1 09:45:27 res 51/04:1f:20:1f:00/ff:ff:ff:ff:ff/e0 Emask 0x1 (device error)
Feb 1 09:45:27 ata2.00: status: { DRDY ERR }
Feb 1 09:45:27 ata2.00: error: { ABRT }
Feb 1 09:45:27 ata2.00: configured for UDMA/66
Feb 1 09:45:27 ata2: EH complete
Disky jsou naprosto nove,radic taky.
Dle toho prispevku a nekolika dalsich by mel ovladac tuto chybu hazet vsem pod novejsimi jadry, a pod < 2.6.15 bezet.
Vyzkousel jsem tyto jadra ale se stejnym vysledkem:
linux-2.6.20
linux-2.6.24-gentoo
linux-2.6.12
Nemate nekdo zkusenost s kterym jadrem, pripadne jak pomoci nejakeho patche tuhle mrchu rozchodit?
Portage 2.1.2.2 (default-linux/x86/2007.0, gcc-4.1.1, glibc-2.5-r0, 2.6.24-gentoono_sleep_state i686)
=================================================================
System uname: 2.6.24-gentoono_sleep_state i686 AMD Athlon(tm) XP 2200+
Gentoo Base System release 1.12.9
1. A system with 2 ODDs attached to a Sii3512 may not boot.
Presto jsem se pokusil flashnout, ale problem je ze cip ktery radic ma (vyrobce ST-Lab) je ht27c010-70, vyzkousel jsem vsechny podporovane chipy ktere mely take 1mb, z nasledujiciho seznamu :
AMD’s Am29F010B/Am29LV010B (1 Megabit) and Am29F040B (4 Megabit) AMD’s Am29LV400B (4 Megabit) variable sectors Atmel’s AT49BV512 (64KB), AT29LV010A (1 Megabit), and AT49LV040 (4 Megabit) SST’s 39SF010 (1 Megabit), 39VF010 (1 Megabit), 39VF020 (2 Megabit), 39SF020 (2 Megabit), and 39VF040 (4 Megabit). SANYO’s LE28C1001D (1 Megabit) WinBound’s 29EE011 (1 Megabit) and 29EE512 (64KB) STMicroelectronics M29F010B/ M29W010B (1 Megabit) STMicroelectronics M29W040B (4 Megabit) STMicroelectronics M29W400B (4 Megabit) variable sectors MXIC MX29LV040 (4 Megabit) PMC Pm39LV010(1Megabit) and PMC Pm39LV040 (4Megabit)
ale zadne flashnuti se nepovedlo (pritom verze biosu byla u dvou chipu nactena spravne). (Verzi updflash.exe jsem mel 3.35 12/19/2006 a zadnou novejsi se mi sehnat nepodarilo).
Zkousel jsem i jine PCI a jine konfigurace IRQ, bezvysledne.
Radic jsem zkousel na desce jako "IDE MASTER" a take nic.
Nekde jsem take vyhrabal, ze by mohl pomoc parametr kernelu ide=reverse. Jak jinak nez bezvysledne.
Jeste jen doplnim jak se radic komplet hlasi:
2.2.2008 12:00
00:06.0 RAID bus controller: Silicon Image, Inc. SiI 3512 [SATALink/SATARaid] Serial ATA Controller (rev 01)
Subsystem: Silicon Image, Inc. SiI 3512 SATARaid Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- < TAbort- < MAbort- >SERR- < PERR- INTx-
Latency: 32, Cache Line Size: 4 bytes
Interrupt: pin A routed to IRQ 17
Region 0: I/O ports at ec00 [size=8]
Region 1: I/O ports at e800 [size=4]
Region 2: I/O ports at e400 [size=8]
Region 3: I/O ports at e000 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at dffffe00 (32-bit, non-prefetchable) [size=512]
Expansion ROM at dff00000 [disabled] [size=512K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: SiI_IDE
Kernel modules: sata_sil
Uz zacinam byt zoufalej 
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.