nefunguje jeden tuner na PVR-500

Zdravim, pokousim se zprovoznit TV tuner Hauppauge pvr-500, ale funguje pouze jeden tuner. Moduly se nactou v poradku, dmesg nehlasi zadnou chybu

ivtv:  Start initialization, version 1.1.0                                                       
ivtv0: Initializing card #0                                                                      
ivtv0: Autodetected Hauppauge card (cx23416 based)                                               
ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 21 (level, low) -> IRQ 21                             
tuner 1-0043: chip found @ 0x86 (ivtv i2c driver #0)                                             
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)                                               
tuner 1-0043: type set to tda9887                                                                
TEA5767 detected.                                                                                
tuner 1-0060: chip found @ 0xc0 (ivtv i2c driver #0)                                             
tea5767 1-0060: type set to Philips TEA5767HN FM Radio                                           
tuner 1-0060: type set to tea5767                                                                
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)                                             
wm8775 1-001b: chip found @ 0x36 (ivtv i2c driver #0)                                            
tveeprom 1-0050: Hauppauge model 23559, rev D491, serial# 9522319                                
tveeprom 1-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)                          
tveeprom 1-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)              
tveeprom 1-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)             
tveeprom 1-0050: audio processor is CX25843 (idx 37)                                             
tveeprom 1-0050: decoder processor is CX25843 (idx 30)                                           
tveeprom 1-0050: has radio, has no IR receiver, has no IR transmitter                            
ivtv0: Autodetected WinTV PVR 500 (unit #1)                                                      
tuner-simple 1-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))                     
tuner 1-0061: type set to Philips PAL/SECAM m                                                    
ivtv0: Registered device video0 for encoder MPG (4096 kB)                                        
ivtv0: Registered device video32 for encoder YUV (2048 kB)                                       
ivtv0: Registered device vbi0 for encoder VBI (1024 kB)                                          
ivtv0: Registered device video24 for encoder PCM (320 kB)                                        
ivtv0: Registered device radio0 for encoder radio                                                
ivtv0: Initialized card #0: WinTV PVR 500 (unit #1)                                              
ivtv1: Initializing card #1                                                                      
ivtv1: Autodetected Hauppauge card (cx23416 based)
ACPI: PCI Interrupt 0000:06:09.0[A] -> GSI 22 (level, low) -> IRQ 23
tuner 2-0043: chip found @ 0x86 (ivtv i2c driver #1)
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0043: type set to tda9887
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 2-0044: cx25843-23 found @ 0x88 (ivtv i2c driver #1)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 2-0050: Hauppauge model 23559, rev D491, serial# 9522319
tveeprom 2-0050: tuner model is Philips FQ1216AME MK4 (idx 91, type 56)
tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74)
tveeprom 2-0050: second tuner model is Philips TEA5768HL FM Radio (idx 101, type 62)
tveeprom 2-0050: audio processor is CX25843 (idx 37)
tveeprom 2-0050: decoder processor is CX25843 (idx 30)
tveeprom 2-0050: has radio, has no IR receiver, has no IR transmitter
ivtv1: Correcting tveeprom data: no radio present on second unit
ivtv1: Autodetected WinTV PVR 500 (unit #2)
tuner-simple 2-0061: type set to 56 (Philips PAL/SECAM multi (FQ1216AME MK4))
tuner 2-0061: type set to Philips PAL/SECAM m
ivtv1: Registered device video1 for encoder MPG (4096 kB)
ivtv1: Registered device video33 for encoder YUV (2048 kB)
ivtv1: Registered device vbi1 for encoder VBI (1024 kB)
ivtv1: Registered device video25 for encoder PCM (320 kB)
ivtv1: Initialized card #1: WinTV PVR 500 (unit #2)
ivtv:  End initialization

mplayer /dev/video1

zacne v poradku prehravat ale

mplayer /dev/video0

vypise jenom

Prehravam /dev/video0

ale neprehrava nic a ukoncit jde pouze Ctrl+C. dmesg vypise

ivtv0: i2c addr 0x44 not found for command 0xc0cc5605
ivtv0: i2c addr 0x44 not found for command 0x40045613
ivtv0: i2c addr 0x44 not found for command 0x40045612
ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d
ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d
ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d
ivtv0: i2c hardware 0x00000001 (cx2584x) not found for command 0x4008646d
ivtv0: i2c addr 0x44 not found for command 0xc0cc5605
ivtv0: i2c addr 0x44 not found for command 0x40045613
ivtv0: i2c addr 0x44 not found for command 0x40045612

cat /dev/video0 > xxx.mpg

jenom vytvori soubor nulove velikosti.

Zkousel jsem to na Gentoo, Archlinuxu a Knoppmyth, vysledek porad stejny, ve dvou ruznych PC. Setkali jste se uz s timto problemem?

Dotaz: nefunguje jeden tuner na PVR-500