Pioneer DVR-212 problem vypalovani

Pioneerka je zapojena pres SATA,deska-VIA KT600V (aktualizovany bios),distribuce Mandriva 2008.0 free.Na programu asi nezalezi zkousel sem ruzny nastaveni v,K3b,brasero atd. medium nacte,ale pri vypalovani se vubec nerozjede.V oknech fungovala normalne. Stara vypalovacka zapojena pres IDE funguje.

snad je tahle cast logu ta dulezita

--------------------------------------------

ATIP info from disk:

Indicated writing power: 4

Is not unrestricted

Is not erasable

Disk sub type: Medium Type A, low Beta category (A-) (2)

ATIP start of lead in: -12508 (97:15/17)

Speed set to 705 KB/s

ATIP start of lead out: 359845 (79:59/70)

Disk type: Short strategy type (Phthalocyanine or similar)

Manuf. index: 22

Manufacturer: Ritek Co.

Blocks total: 359845 Blocks current: 359845 Blocks remaining: 132109

Starting to write CD/DVD at speed 4.0 in dummy SAO mode for single session.

Last chance to quit, starting dummy write in 2 seconds. 1 seconds. 0 seconds. Operation starts.

Waiting for reader process to fill input buffer ... input buffer ready.

Sending CUE sheet...

/usr/bin/wodim: CUE sheet not accepted. Retrying with minimum pregapsize = 1.

Errno: 5 (Input/output error), send_cue_sheet scsi sendcmd: no error

CDB: 5D 00 00 00 00 00 00 00 D0 00

status: 0x2 (CHECK CONDITION)

Sense Bytes: 70 00 05 06 00 00 20 0E 24 08 10 40 A8 04 00 00

Sense Key: 0x5 Illegal Request, Segment 0

Sense Code: 0xA8 Qual 0x04 (vendor unique sense code 0xA8) [No matching qualifier] Fru 0x0

Sense flags: Blk 100663328 (not valid)

cmd finished after 0.018s timeout 200s

/usr/bin/wodim: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.

/usr/bin/wodim: Cannot send CUE sheet.

/usr/bin/wodim: Could not write Lead-in. Writing time: 0.142s

/usr/bin/wodim: fifo had 64 puts and 0 gets.

/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

Dotaz: Pioneer DVR-212 problem vypalovani

Odpovědi