Portál AbcLinuxu, 17. července 2025 04:37
Dec 1 18:29:44 Matrix kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Dec 1 18:29:44 Matrix kernel: ata1.00: BMDMA stat 0x24
Dec 1 18:29:44 Matrix kernel: ata1.00: cmd ca/00:18:9f:6f:9f/00:00:00:00:00/e4 tag 0 dma 12288 out
Dec 1 18:29:44 Matrix kernel: res 51/84:00:b6:6f:9f/84:00:04:00:00/e4 Emask 0x10 (ATA bus error)
Dec 1 18:29:44 Matrix kernel: ata1.00: status: { DRDY ERR }
Dec 1 18:29:44 Matrix kernel: ata1.00: error: { ICRC ABRT }
Dec 1 18:29:44 Matrix kernel: ata1: soft resetting link
Dec 1 18:29:44 Matrix kernel: ata1.00: configured for UDMA/100
Dec 1 18:29:44 Matrix kernel: ata1: EH complete
Dec 1 18:29:44 Matrix kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Dec 1 18:29:44 Matrix kernel: ata1.00: BMDMA stat 0x24
Dec 1 18:29:44 Matrix kernel: ata1.00: cmd ca/00:18:9f:6f:9f/00:00:00:00:00/e4 tag 0 dma 12288 out
Dec 1 18:29:44 Matrix kernel: res 51/84:00:b6:6f:9f/84:00:04:00:00/e4 Emask 0x10 (ATA bus error)
Dec 1 18:29:44 Matrix kernel: ata1.00: status: { DRDY ERR }
Dec 1 18:29:44 Matrix kernel: ata1.00: error: { ICRC ABRT }
Dec 1 18:29:44 Matrix kernel: ata1: soft resetting link
Dec 1 18:29:44 Matrix kernel: ata1.00: configured for UDMA/100
Dec 1 18:29:44 Matrix kernel: ata1: EH complete
Dec 1 18:29:44 Matrix kernel: ata1.00: limiting speed to UDMA/66:PIO4
Dec 1 18:29:45 Matrix kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
Dec 1 18:29:45 Matrix kernel: ata1.00: BMDMA stat 0x24
Dec 1 18:29:45 Matrix kernel: ata1.00: cmd ca/00:18:9f:6f:9f/00:00:00:00:00/e4 tag 0 dma 12288 out
Dec 1 18:29:45 Matrix kernel: res 51/84:00:b6:6f:9f/84:00:04:00:00/e4 Emask 0x10 (ATA bus error)
Dec 1 18:29:45 Matrix kernel: ata1.00: status: { DRDY ERR }
Dec 1 18:29:45 Matrix kernel: ata1.00: error: { ICRC ABRT }
Dec 1 18:29:45 Matrix kernel: ata1: soft resetting link
Dec 1 18:29:45 Matrix kernel: ata1.00: configured for UDMA/66
Dec 1 18:29:45 Matrix kernel: ata1: EH complete
Dec 1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Dec 1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Dec 1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Dec 1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Write Protect is off
Dec 1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
Dec 1 18:29:45 Matrix kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
1.12.2008 20:42
frEon | skóre: 40
| Praha
To jsem také udělal. Mám dva disky sda - 80 GB, stary disk PATA , sdb 250 GB novy disk (par mesicu) SATA. U obou je TEST RESULT PASSED.
Ale dalsi udaje me od tohoto faktu nejak vzdaluji..
Matrix:/home/jarda # smartctl /dev/sda -a
smartctl 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar family
Device Model: WDC WD800BB-00DKA0
Serial Number: WD-WCAHL2458249
Firmware Version: 77.07W77
User Capacity: 80 026 361 856 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Dec 1 20:49:12 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (2472) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 38) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 086 083 021 Pre-fail Always - 2200
4 Start_Stop_Count 0x0032 095 095 040 Old_age Always - 5044
5 Reallocated_Sector_Ct 0x0033 198 198 140 Pre-fail Always - 17
7 Seek_Error_Rate 0x000b 100 253 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 087 087 000 Old_age Always - 9844
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 096 096 000 Old_age Always - 4889
194 Temperature_Celsius 0x0022 108 253 000 Old_age Always - 35
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 13769
200 Multi_Zone_Error_Rate 0x0009 200 085 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 802 -
# 2 Conveyance offline Completed without error 00% 365 -
# 3 Conveyance offline Completed without error 00% 159 -
# 4 Conveyance offline Completed without error 00% 157 -
# 5 Conveyance offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Matrix:/home/jarda # smartctl /dev/sdb -a
smartctl 5.39 2008-05-08 21:56 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-8 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Barracuda 7200.10 family
Device Model: ST3250410AS
Serial Number: 9RY1V4PL
Firmware Version: 3.AAC
User Capacity: 250 059 350 016 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Mon Dec 1 20:52:19 2008 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 430) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 64) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 117 099 006 Pre-fail Always - 123591366
3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 454
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail Always - 18533361
9 Power_On_Hours 0x0032 098 098 000 Old_age Always - 1984
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 452
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 059 055 045 Old_age Always - 41 (Lifetime Min/Max 19/41)
194 Temperature_Celsius 0x0022 041 045 000 Old_age Always - 41 (0 17 0 0)
195 Hardware_ECC_Recovered 0x001a 080 060 000 Old_age Always - 120518408
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 TA_Increase_Count 0x0032 100 253 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 250 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
neni tohle spis radic nebo kabel?
Pokud je to radic, pak je to i disk, protoze radice jsou v elektronice disku. Kabel by to byt nemel..
Me hlavne matou cetnosti nekterych chyb u obou disku.. Vim, ze predchozi verze smartctl neumela dokonale pracovat se sata disky. Pri pohledu nacetnosti chyb u druheho, noveho SATA disku se mi to zda paranoidne prehnane. Realokovane sektory u PATA disku sleduju uz delsi dobu a vim o nich. Dnesni hlaseni z logu me trochu desi.. Kabel nema duvot to byt. S pc jsem ted nic, co se HW zasahu tyka, nedelal.
1.12.2008 22:30
Bluebear | skóre: 30
| blog: Bluebearův samožerblog
| Praha
Tipoval bych buď odcházející elektroniku disku, nebo odcházející základní desku. (Kdyby se to stalo s novou základní deskou, tak je klidně možné, že je deska šmejd už z výroby a například trvá na tom, aby konkrétní počet disků byl rozdělen do konkrétních slotů - viděl jsem takových bohužel dost.)
Zálohovat, zálohovat, zálohovat. Pak bych zkusil vyměnit disk za jiný, třeba i půjčený - bude-li to blbnout dál, chyba je jinde, jinak asi umírá disk.
Ktery z tech 2 disku to je ? Precejenom - oznaceni ata1.00 se rozchazi s klasickym oznacenim pripadneho pevneho disku. Zkousel jsem pomoci par prikazu "(lspci, lsscsi, ...) | grep ata" najit konkretni zarizeni (radic, nebo disk) a bezvysledne..
Problem vyresen 
Sam bych neveril tomu, ze sam od sebe muze odejit i datovy kabel.. Vymnenil jsem ho za jiny 80ti zilovy plochy, misto puvodniho 80ti ziloveho svazkovaneho a jadro si spokojene chrochta bez chyb
MYslim, ze tohle byl typicky pripad toho, ze uzivatel linuxu ma kompletni a detailni prehled o svem hardwaru a kdykoli chce, muze skrze log kontrolovat bezproblemovou cinnost. Nenapada me, jakym zpusobem bych diagnostikoval tutez zavadu ve Windows..
Diky vsem za help !
J@.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.