Portál AbcLinuxu, 12. května 2025 13:30
server:~# fdisk /dev/sdc The number of cylinders for this disk is set to 24321. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p Disk /dev/sdc: 200.0 GB, 200049647616 bytes 255 heads, 63 sectors/track, 24321 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Disk identifier: 0x00069071
Device Boot Start End Blocks Id System /dev/sdc1 1 22908 184008478+ 83 Linux /dev/sdc2 22909 24321 11349922+ 82 Linux swap / Solaris Command (m for help): ^C server:~# ls /dev/sdc* /dev/sdc /dev/sdc1 /dev/sdc5 /dev/sdc6 /dev/sdc7 server:~#
Nějaký nápad čím to může být způsobeno, prosím? Server jede na debian lenny.
Díky
Rozlozeni partic na disku, nemusi odpovidat device listu,
obcas se pri nespravnem umountu usb device strati
a je potreba si ho rucne dodelat:
mknod /dev/sdc2 b 8 2
NN
Nepomuze prikaz partprobe (patri k balicku partedu)?
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.