Mic na acer 6935G - Ubuntu 9.04

Dobrý den,

týká se problém jen nahrávání a jinak funguje zvuk normálně? Zkuste přiložit výpis příkazů dmesg a lspci. Dál bych se chtěl zeptat, jakou máte distribuci?

s pozdravem JH

http://www.jackhokus.cz/

10.7.2009 18:07 Václav Kytka
Rozbalit Rozbalit vše Re: Mic na acer 6935G - Ubuntu 9.04

Ano, problém je jen v nahrávání.

dmesg

[    0.504746] bus: 07 index 3 io port: [0x00-0xffff]
[    0.504747] bus: 07 index 4 mmio: [0x000000-0xffffffff]
[    0.504753] NET: Registered protocol family 2
[    0.520041] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.520215] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.520470] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.520597] TCP: Hash tables configured (established 131072 bind 65536)
[    0.520599] TCP reno registered
[    0.528054] NET: Registered protocol family 1
[    0.528131] checking if image is initramfs... it is
[    1.005894] Freeing initrd memory: 7379k freed
[    1.005925] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    1.005927] Simple Boot Flag at 0x44 set to 0x1
[    1.006054] cpufreq: No nForce2 chipset.
[    1.006163] audit: initializing netlink socket (disabled)
[    1.006182] type=2000 audit(1247241020.004:1): initialized
[    1.012023] highmem bounce pool size: 64 pages
[    1.012027] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    1.013019] VFS: Disk quotas dquot_6.5.1
[    1.013062] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.013523] fuse init (API version 7.10)
[    1.013586] msgmni has been set to 1671
[    1.013719] alg: No test for stdrng (krng)
[    1.013727] io scheduler noop registered
[    1.013729] io scheduler anticipatory registered
[    1.013730] io scheduler deadline registered
[    1.013741] io scheduler cfq registered (default)
[    1.044050] pci 0000:01:00.0: Boot video device
[    1.045809] pcieport-driver 0000:00:01.0: setting latency timer to 64
[    1.045837] pcieport-driver 0000:00:01.0: found MSI capability
[    1.045857] pcieport-driver 0000:00:01.0: irq 2303 for MSI/MSI-X
[    1.045864] pci_express 0000:00:01.0:pcie00: allocate port service
[    1.045875] pci_express 0000:00:01.0:pcie02: allocate port service
[    1.045883] pci_express 0000:00:01.0:pcie03: allocate port service
[    1.045923] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    1.045960] pcieport-driver 0000:00:1c.0: found MSI capability
[    1.045986] pcieport-driver 0000:00:1c.0: irq 2302 for MSI/MSI-X
[    1.045998] pci_express 0000:00:1c.0:pcie00: allocate port service
[    1.046007] pci_express 0000:00:1c.0:pcie02: allocate port service
[    1.046018] pci_express 0000:00:1c.0:pcie03: allocate port service
[    1.046074] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    1.046112] pcieport-driver 0000:00:1c.1: found MSI capability
[    1.046137] pcieport-driver 0000:00:1c.1: irq 2301 for MSI/MSI-X
[    1.046150] pci_express 0000:00:1c.1:pcie00: allocate port service
[    1.046159] pci_express 0000:00:1c.1:pcie02: allocate port service
[    1.046167] pci_express 0000:00:1c.1:pcie03: allocate port service
[    1.046224] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    1.046262] pcieport-driver 0000:00:1c.3: found MSI capability
[    1.046287] pcieport-driver 0000:00:1c.3: irq 2300 for MSI/MSI-X
[    1.046299] pci_express 0000:00:1c.3:pcie00: allocate port service
[    1.046308] pci_express 0000:00:1c.3:pcie02: allocate port service
[    1.046317] pci_express 0000:00:1c.3:pcie03: allocate port service
[    1.046372] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[    1.046410] pcieport-driver 0000:00:1c.4: found MSI capability
[    1.046436] pcieport-driver 0000:00:1c.4: irq 2299 for MSI/MSI-X
[    1.046448] pci_express 0000:00:1c.4:pcie00: allocate port service
[    1.046457] pci_express 0000:00:1c.4:pcie02: allocate port service
[    1.046467] pci_express 0000:00:1c.4:pcie03: allocate port service
[    1.046530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.046667] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.046811] ACPI: AC Adapter [ADP0] (on-line)
[    1.092553] ACPI: Battery Slot [BAT0] (battery present)
[    1.092615] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    1.092617] ACPI: Power Button (FF) [PWRF]
[    1.092651] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[    1.092653] ACPI: Sleep Button (CM) [SLPB]
[    1.092682] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[    1.092684] ACPI: Power Button (CM) [PWRB]
[    1.092715] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    1.092782] ACPI: Lid Switch [LID0]
[    1.092928] fan PNP0C0B:00: registered as cooling_device0
[    1.092933] ACPI: Fan [FAN0] (off)
[    1.093529] ACPI: SSDT BFC77C18, 0265 (r1 PmRef Cpu0Ist     3000 INTL 20051117)
[    1.093959] ACPI: SSDT BFC75598, 0537 (r1 PmRef Cpu0Cst     3001 INTL 20051117)
[    1.094428] Monitor-Mwait will be used to enter C-1 state
[    1.094430] Monitor-Mwait will be used to enter C-2 state
[    1.094432] Monitor-Mwait will be used to enter C-3 state
[    1.094444] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    1.094458] processor ACPI_CPU:00: registered as cooling_device1
[    1.094461] ACPI: Processor [CPU0] (supports 8 throttling states)
[    1.094863] ACPI: SSDT BFC76E18, 01CF (r1 PmRef    ApIst     3000 INTL 20051117)
[    1.095303] ACPI: SSDT BFC77F18, 008D (r1 PmRef    ApCst     3000 INTL 20051117)
[    1.095850] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    1.095864] processor ACPI_CPU:01: registered as cooling_device2
[    1.095867] ACPI: Processor [CPU1] (supports 8 throttling states)
[    1.098347] thermal LNXTHERM:01: registered as thermal_zone0
[    1.098611] ACPI: Transitioning device [FAN0] to D0
[    1.098613] ACPI: Unable to turn cooling device [f6c163c0] 'on'
[    1.098615] ACPI: Thermal Zone [TZ00] (36 C)
[    1.098740] thermal LNXTHERM:02: registered as thermal_zone1
[    1.098867] ACPI: Thermal Zone [TZVR] (31 C)
[    1.098995] thermal LNXTHERM:03: registered as thermal_zone2
[    1.099121] ACPI: Thermal Zone [TZVL] (32 C)
[    1.099245] thermal LNXTHERM:04: registered as thermal_zone3
[    1.099373] ACPI: Thermal Zone [TZ01] (25 C)
[    1.099416] isapnp: Scanning for PnP cards...
[    1.454549] isapnp: No Plug & Play device found
[    1.464694] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[    1.465456] brd: module loaded
[    1.465690] loop: module loaded
[    1.465747] Fixed MDIO Bus: probed
[    1.465751] PPP generic driver version 2.4.2
[    1.465789] input: Macintosh mouse button emulation as /devices/virtual/input/input4
[    1.465810] Driver 'sd' needs updating - please use bus_type methods
[    1.465817] Driver 'sr' needs updating - please use bus_type methods
[    1.465846] ahci 0000:00:1f.2: version 3.0
[    1.465856] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    1.465885] ahci 0000:00:1f.2: irq 2298 for MSI/MSI-X
[    1.465960] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[    1.465963] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ems
[    1.465967] ahci 0000:00:1f.2: setting latency timer to 64
[    1.466219] scsi0 : ahci
[    1.466277] scsi1 : ahci
[    1.466317] scsi2 : ahci
[    1.466359] scsi3 : ahci
[    1.466400] scsi4 : ahci
[    1.466441] scsi5 : ahci
[    1.466522] ata1: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305100 irq 2298
[    1.466525] ata2: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305180 irq 2298
[    1.466527] ata3: DUMMY
[    1.466528] ata4: DUMMY
[    1.466530] ata5: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305300 irq 2298
[    1.466533] ata6: SATA max UDMA/133 abar m2048@0xdb305000 port 0xdb305380 irq 2298
[    1.948011] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.998079] ata1.00: ATA-8: WDC WD3200BEVT-22ZCT0, 11.01A11, max UDMA/133
[    1.998081] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.000498] ata1.00: configured for UDMA/133
[    2.904010] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.905817] ata2.00: ATAPI: Optiarc BD ROM BC-5500S, 1.B2, max UDMA/100
[    2.907754] ata2.00: configured for UDMA/100
[    3.244011] ata5: SATA link down (SStatus 0 SControl 300)
[    3.580010] ata6: SATA link down (SStatus 0 SControl 300)
[    3.596086] scsi 0:0:0:0: Direct-Access     ATA      WDC WD3200BEVT-2 11.0 PQ: 0 ANSI: 5
[    3.596151] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[    3.596163] sd 0:0:0:0: [sda] Write Protect is off
[    3.596164] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.596183] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.596227] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
[    3.596238] sd 0:0:0:0: [sda] Write Protect is off
[    3.596239] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.596257] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.596260] sda: sda1 sda2 < sda5 >
[    3.673913] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.673942] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.674898] scsi 1:0:0:0: CD-ROM            Optiarc BD ROM BC-5500S 1.B2 PQ: 0 ANSI: 5
[    3.677016] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.677019] Uniform CD-ROM driver Revision: 3.20
[    3.677080] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    3.677107] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.677605] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.677618] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    3.677628] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    3.677631] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    3.677673] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[    3.681577] ehci_hcd 0000:00:1a.7: debug port 1
[    3.681583] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[    3.681594] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdb305c00
[    3.696006] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    3.696056] usb usb1: configuration #1 chosen from 1 choice
[    3.696077] hub 1-0:1.0: USB hub found
[    3.696082] hub 1-0:1.0: 4 ports detected
[    3.696160] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.696169] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    3.696172] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    3.696200] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[    3.700102] ehci_hcd 0000:00:1d.7: debug port 1
[    3.700108] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    3.700118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xdb305800
[    3.716006] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    3.716054] usb usb2: configuration #1 chosen from 1 choice
[    3.716075] hub 2-0:1.0: USB hub found
[    3.716080] hub 2-0:1.0: 8 ports detected
[    3.716155] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.716167] uhci_hcd: USB Universal Host Controller Interface driver
[    3.716180] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.716185] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    3.716188] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.716218] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    3.716246] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000070e0
[    3.716301] usb usb3: configuration #1 chosen from 1 choice
[    3.716319] hub 3-0:1.0: USB hub found
[    3.716325] hub 3-0:1.0: 2 ports detected
[    3.716387] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    3.716393] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    3.716395] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.716423] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[    3.716450] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000070c0
[    3.716502] usb usb4: configuration #1 chosen from 1 choice
[    3.716520] hub 4-0:1.0: USB hub found
[    3.716524] hub 4-0:1.0: 2 ports detected
[    3.716586] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    3.716591] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    3.716594] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.716627] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[    3.716648] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000070a0
[    3.716701] usb usb5: configuration #1 chosen from 1 choice
[    3.716722] hub 5-0:1.0: USB hub found
[    3.716728] hub 5-0:1.0: 2 ports detected
[    3.716786] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    3.716791] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    3.716794] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.716828] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[    3.716849] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00007080
[    3.716899] usb usb6: configuration #1 chosen from 1 choice
[    3.716917] hub 6-0:1.0: USB hub found
[    3.716922] hub 6-0:1.0: 2 ports detected
[    3.716982] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    3.716987] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    3.716989] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    3.717018] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[    3.717038] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00007060
[    3.717089] usb usb7: configuration #1 chosen from 1 choice
[    3.717109] hub 7-0:1.0: USB hub found
[    3.717115] hub 7-0:1.0: 2 ports detected
[    3.717175] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    3.717180] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    3.717183] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    3.717211] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[    3.717238] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00007040
[    3.717294] usb usb8: configuration #1 chosen from 1 choice
[    3.717312] hub 8-0:1.0: USB hub found
[    3.717317] hub 8-0:1.0: 2 ports detected
[    3.717415] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[    3.720637] i8042.c: Detected active multiplexing controller, rev 1.1.
[    3.722521] serio: i8042 KBD port at 0x60,0x64 irq 1
[    3.722524] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    3.722526] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    3.722528] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    3.722530] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    3.724526] mice: PS/2 mouse device common for all mice
[    3.744548] rtc_cmos 00:03: RTC can wake from S4
[    3.744571] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    3.744594] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    3.744636] device-mapper: uevent: version 1.0.3
[    3.744698] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[    3.744752] device-mapper: multipath: version 1.0.5 loaded
[    3.744754] device-mapper: multipath round-robin: version 1.0.0 loaded
[    3.744807] EISA: Probing bus 0 at eisa.0
[    3.744811] Cannot allocate resource for EISA slot 1
[    3.744813] Cannot allocate resource for EISA slot 2
[    3.744815] Cannot allocate resource for EISA slot 3
[    3.744816] Cannot allocate resource for EISA slot 4
[    3.744818] Cannot allocate resource for EISA slot 5
[    3.744819] Cannot allocate resource for EISA slot 6
[    3.744821] Cannot allocate resource for EISA slot 7
[    3.744825] EISA: Detected 0 cards.
[    3.744908] cpuidle: using governor ladder
[    3.744993] cpuidle: using governor menu
[    3.745357] TCP cubic registered
[    3.745429] NET: Registered protocol family 10
[    3.745756] lo: Disabled Privacy Extensions
[    3.746001] NET: Registered protocol family 17
[    3.746015] Bluetooth: L2CAP ver 2.11
[    3.746016] Bluetooth: L2CAP socket layer initialized
[    3.746018] Bluetooth: SCO (Voice Link) ver 0.6
[    3.746020] Bluetooth: SCO socket layer initialized
[    3.746043] Marking TSC unstable due to TSC halts in idle
[    3.746049] Bluetooth: RFCOMM socket layer initialized
[    3.746053] Bluetooth: RFCOMM TTY layer initialized
[    3.746054] Bluetooth: RFCOMM ver 1.10
[    3.746498] Using IPI No-Shortcut mode
[    3.746543] registered taskstats version 1
[    3.746628]   Magic number: 1:136:841
[    3.746675] rtc_cmos 00:03: setting system clock to 2009-07-10 15:50:23 UTC (1247241023)
[    3.746678] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    3.746679] EDD information not available.
[    3.746894] Freeing unused kernel memory: 532k freed
[    3.746985] Write protecting the kernel text: 4112k
[    3.747019] Write protecting the kernel read-only data: 1524k
[    3.783524] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[    3.899121] ATL1E 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    3.899141] ATL1E 0000:02:00.0: setting latency timer to 64
[    4.008570] usb 1-2: new high speed USB device using ehci_hcd and address 2
[    4.175334] usb 1-2: configuration #1 chosen from 1 choice
[    4.181983] PM: Starting manual resume from disk
[    4.181985] PM: Resume from partition 8:5
[    4.181987] PM: Checking hibernation image.
[    4.182157] PM: Resume from disk failed.
[    4.232424] kjournald starting. Commit interval 5 seconds
[    4.232432] EXT3-fs: mounted filesystem with ordered data mode.
[    4.552517] usb 2-6: new high speed USB device using ehci_hcd and address 4
[    4.759139] usb 2-6: configuration #1 chosen from 1 choice
[    5.000040] usb 4-2: new full speed USB device using uhci_hcd and address 2
[    5.158566] usb 4-2: configuration #1 chosen from 1 choice
[    5.400565] usb 5-2: new low speed USB device using uhci_hcd and address 2
[    5.500094] Clocksource tsc unstable (delta = -437297675 ns)
[    5.554738] usb 5-2: configuration #1 chosen from 1 choice
[    5.796111] usb 6-1: new low speed USB device using uhci_hcd and address 2
[    5.975959] usb 6-1: configuration #1 chosen from 1 choice
[   10.463924] udev: starting version 141
[   10.790051] Linux agpgart interface v0.103
[   10.805784] cfg80211: Calling CRDA to update world regulatory domain
[   10.850575] usbcore: registered new interface driver hiddev
[   10.864770] iTCO_vendor_support: vendor-support=0
[   10.864889] input: HID 04b4:0033 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input6
[   10.865874] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
[   10.866096] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[   10.866159] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   10.868134] generic-usb 0003:04B4:0033.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b4:0033] on usb-0000:00:1d.0-2/input0
[   10.883178] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.1/usb6/6-1/6-1:1.0/input/input7
[   10.884092] generic-usb 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.1-1/input0
[   10.884105] usbcore: registered new interface driver usbhid
[   10.884122] usbhid: v2.6:USB HID core driver
[   10.914167] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   11.207050] nvidia: module license 'NVIDIA' taints kernel.
[   11.364175] acer-wmi: Acer Laptop ACPI-WMI Extras
[   11.364735] acer-wmi: software RFKILL enabled
[   11.392134] Linux video capture interface: v2.00
[   11.459016] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   11.459036] nvidia 0000:01:00.0: setting latency timer to 64
[   11.459312] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
[   11.465897] uvcvideo: Found UVC 1.00 device Acer HD Crystal Eye webcam (064e:a117)
[   11.467627] input: Acer HD Crystal Eye webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-6/2-6:1.0/input/input9
[   11.468143] usbcore: registered new interface driver uvcvideo
[   11.468171] USB Video Class driver (v0.1.0)
[   11.475069] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume
[   11.600118] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[   11.600120] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[   11.600202] iwlagn 0000:05:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[   11.600230] iwlagn 0000:05:00.0: setting latency timer to 64
[   11.600296] iwlagn: Detected Intel Wireless WiFi Link 5100AGN REV=0x54
[   11.621943] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[   11.622002] iwlagn 0000:05:00.0: irq 2297 for MSI/MSI-X
[   11.628904] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   11.631561] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[   11.631613] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   11.811835] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[   11.842085] cfg80211: World regulatory domain updated:
[   11.842087]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   11.842089]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.842091]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.842092]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   11.842094]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.842096]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   11.962609] usbcore: registered new interface driver snd-usb-audio
[   12.004053] usb 7-1: new full speed USB device using uhci_hcd and address 2
[   12.167839] usb 7-1: configuration #1 chosen from 1 choice
[   12.224178] lp: driver loaded but no devices found
[   12.252131] Bluetooth: Generic Bluetooth USB driver ver 0.3
[   12.252205] usbcore: registered new interface driver btusb
[   12.279270] Adding 9060620k swap on /dev/sda5. Priority:-1 extents:1 across:9060620k
[   12.343424] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x12a0b1, caps: 0xa04711/0xa04000
[   12.380710] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input11
[   12.805710] EXT3 FS on sda1, internal journal
[   13.847418] type=1505 audit(1247241033.597:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=2199
[   13.879018] type=1505 audit(1247241033.629:3): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2203
[   13.879072] type=1505 audit(1247241033.629:4): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2203
[   13.879101] type=1505 audit(1247241033.629:5): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2203
[   13.879129] type=1505 audit(1247241033.629:6): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2203
[   13.966685] type=1505 audit(1247241033.717:7): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2208
[   13.966773] type=1505 audit(1247241033.717:8): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2208
[   13.985065] type=1505 audit(1247241033.737:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2212
[   16.375299] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   16.375301] Bluetooth: BNEP filters: protocol multicast
[   16.402907] Bridge firewalling registered
[   17.781972] ppdev: user-space parallel port driver
[   21.249336] ATL1E 0000:02:00.0: irq 2296 for MSI/MSI-X
[   21.250844] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   21.251385] iwlagn 0000:05:00.0: firmware: requesting iwlwifi-5000-1.ucode
[   21.430615] ATL1E 0000:02:00.0: ATL1E: eth0 NIC Link is Up<100 Mbps Full Duplex>
[   21.603726] Registered led device: iwl-phy0:radio
[   21.604140] Registered led device: iwl-phy0:assoc
[   21.604153] Registered led device: iwl-phy0:RX
[   21.604164] Registered led device: iwl-phy0:TX
[   21.741281] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   21.745030] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   23.337517] wlan0: authenticate with AP 00:0b:6b:33:ca:6c
[   23.341337] wlan0: authenticated
[   23.341339] wlan0: associate with AP 00:0b:6b:33:ca:6c
[   23.346018] wlan0: RX AssocResp from 00:0b:6b:33:ca:6c (capab=0x421 status=0 aid=3)
[   23.346021] wlan0: associated
[   23.347678] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   23.348095] wlan0: disassociating by local choice (reason=3)
[   32.516055] eth0: no IPv6 routers present
[   33.936054] wlan0: no IPv6 routers present
[   49.699296] Registered led device: iwl-phy0:radio
[   49.699308] Registered led device: iwl-phy0:assoc
[   49.699319] Registered led device: iwl-phy0:RX
[   49.699329] Registered led device: iwl-phy0:TX
[   49.746086] CPU0 attaching NULL sched-domain.
[   49.746090] CPU1 attaching NULL sched-domain.
[   49.756528] CPU0 attaching sched-domain:
[   49.756530] domain 0: span 0-1 level MC
[   49.756532]   groups: 0 1
[   49.756536] CPU1 attaching sched-domain:
[   49.756537] domain 0: span 0-1 level MC
[   49.756539]   groups: 1 0
[   51.768531] wlan0: Trigger new scan to find an IBSS to join
[   57.300047] wlan0: Trigger new scan to find an IBSS to join
[   58.777615] wlan0: Creating new IBSS network, BSSID 76:d7:44:43:22:bb
[   59.877381] ip_tables: (C) 2000-2006 Netfilter Core Team
[   59.899471] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   59.899603] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   59.899605] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[   59.899606] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   60.528053] wlan0: no IPv6 routers present
[   88.780290] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 121.256296] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 153.612316] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 185.972315] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 218.328575] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 250.484282] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 282.840274] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 315.200293] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 347.556274] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 379.916287] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 412.272275] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 444.632292] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 476.988312] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 509.348277] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 541.704035] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 542.440047] CE: hpet increasing min_delta_ns to 15000 nsec
[ 574.064276] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 606.216540] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 638.576296] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 670.932087] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 703.292283] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 735.648274] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 768.008483] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 770.320190] CE: hpet increasing min_delta_ns to 22500 nsec
[ 800.368137] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 832.724290] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)
[ 865.084103] wlan0: No active IBSS STAs - trying to scan for other IBSS networks with same SSID (merge)

lscpi

vasekkytka@makot-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
01:00.0 VGA compatible controller: nVidia Corporation GeForce 9600M GT (rev a1)
02:00.0 Ethernet controller: Attansic Technology Corp. L1e Gigabit Ethernet Adapter (rev b0)
05:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100

Zde..

Dotaz: Mic na acer 6935G - Ubuntu 9.04

Odpovědi