Portál AbcLinuxu, 10. května 2025 01:38
28.8.2009 00:54
the.max | skóre: 46
| blog: Smetiště
dmesg a lsusb?
[zm@localhost ~]$ dmesg
Initializing cgroup subsys cpuset
Linux version 2.6.26.8-57.fc8 (mockbuild@x86-3.fedora.phx.redhat.com) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Dec 18 19:19:45 EST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000002bff0000 (usable)
BIOS-e820: 000000002bff0000 - 000000002bffffc0 (ACPI data)
BIOS-e820: 000000002bffffc0 - 000000002c000000 (ACPI NVS)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
0MB HIGHMEM available.
703MB LOWMEM available.
Using x86 segment limits to approximate NX protection
Entering add_active_range(0, 0, 180208) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 180208
HighMem 180208 -> 180208
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0 -> 180208
On node 0 totalpages: 180208
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 1376 pages used for memmap
Normal zone: 174736 pages, LIFO batch:31
HighMem zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP 000E5010, 0014 (r0 OID_00)
ACPI: RSDT 2BFFCD40, 0030 (r1 INSYDE RSDT_000 1 _CSI 10101)
ACPI: FACP 2BFFFA90, 0074 (r1 INSYDE FACP_000 100 _CSI 10101)
ACPI: DSDT 2BFFCD80, 2D06 (r1 INSYDE Demo 1002 INTL 2002036)
ACPI: FACS 2BFFFFC0, 0040
ACPI: APIC 2BFFFB20, 0068 (r1 INSYDE APIC_000 30303030 0000 30303030)
ACPI: BOOT 2BFFFB90, 0028 (r1 INSYDE ISC_BOOT 100 _CSI 10101)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 20, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 30000000 (gap: 2c000000:d3f80000)
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
SMP: Allowing 2 CPUs, 1 hotplug CPUs
PERCPU: Allocating 41384 bytes of per cpu data
NR_CPUS: 32, nr_cpu_ids: 2
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 178800
Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c07cb000 soft=c07ab000
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2793.077 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 705432k/720832k available (2254k kernel code, 14832k reserved, 1180k data, 284k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xffc53000 - 0xfffff000 (3760 kB)
pkmap : 0xff400000 - 0xff800000 (4096 kB)
vmalloc : 0xec800000 - 0xff3fe000 ( 299 MB)
lowmem : 0xc0000000 - 0xebff0000 ( 703 MB)
.init : 0xc0761000 - 0xc07a8000 ( 284 kB)
.data : 0xc0633adf - 0xc075ab88 (1180 kB)
.text : 0xc0400000 - 0xc0633adf (2254 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
CPA: page pool initialized 1 of 1 pages preallocated
SLUB: Genslabs=12, HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Calibrating delay using timer specific routine.. 5590.51 BogoMIPS (lpj=2795257)
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys devices
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20080321
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Celeron(R) CPU 2.80GHz stepping 09
Brought up 1 CPUs
Total of 1 processors activated (5590.51 BogoMIPS).
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=132 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=56 bytes
sizeof(skbuff)=180 bytes
sizeof(task_struct)=3192 bytes
CPU0 attaching sched-domain:
domain 0: span 0
groups: 0
net_namespace: 660 bytes
Booting paravirtualized kernel on bare hardware
Time: 13:14:17 Date: 08/28/09
NET: Registered protocol family 16
No dock devices found.
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xe8404, last bus=1
PCI: Using configuration type 1 for base access
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: Enabling SiS 96x SMBus
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.VPCI._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 5 6 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 5 6 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 5 6 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 5 6 10 11) *7
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *5 6 10 11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 5 6 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 5 6 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
system 00:03: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:03: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:03: iomem range 0xffee0000-0xffefffff has been reserved
system 00:03: iomem range 0xfffc0000-0xffffffff could not be reserved
system 00:05: ioport range 0x480-0x48f has been reserved
system 00:05: ioport range 0x1000-0x107f has been reserved
system 00:05: ioport range 0x1080-0x10ff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: c000-dfff
MEM window: 0xe0000000-0xefffffff
PREFETCH window: 0x00000000a0000000-0x00000000afffffff
PCI: Bus 2, cardbus bridge: 0000:00:09.0
IO window: 0x00001800-0x000018ff
IO window: 0x00001c00-0x00001cff
PREFETCH window: 0x30000000-0x33ffffff
MEM window: 0x34000000-0x37ffffff
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 17
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs... it is
Freeing initrd memory: 3661k freed
Simple Boot Flag at 0x37 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
type=2000 audit(1251465257.506:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1385
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 42C60EC95A66A54
- User ID: Red Hat, Inc. (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:01:00.0: Boot video device
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /class/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /class/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: Processor [CPU0] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.103
agpgart: Detected SiS chipset - id:1633
agpgart: AGP aperture is 64M @ 0xf0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18
ACPI: PCI interrupt for device 0000:00:02.6 disabled
brd: module loaded
input: Macintosh mouse button emulation as /class/input/input3
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Magic number: 5:662:231
Freeing unused kernel memory: 284k freed
Write protecting the kernel text: 2256k
Write protecting the kernel read-only data: 960k
input: AT Translated Set 2 keyboard as /class/input/input4
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 1
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 23, io mem 0xf4002000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.26.8-57.fc8 ehci_hcd
usb usb1: SerialNumber: 0000:00:03.3
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.0: irq 20, io mem 0xf4000000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.26.8-57.fc8 ohci_hcd
usb usb2: SerialNumber: 0000:00:03.0
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.1: irq 21, io mem 0xf4001000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 3 ports detected
Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb3, caps: 0xa04713/0x0
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: OHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.26.8-57.fc8 ohci_hcd
usb usb3: SerialNumber: 0000:00:03.1
input: SynPS/2 Synaptics TouchPad as /class/input/input5
USB Universal Host Controller Interface driver v3.0
usb 1-4: new high speed USB device using ehci_hcd and address 3
SCSI subsystem initialized
Driver 'sd' needs updating - please use bus_type methods
libata version 3.00 loaded.
pata_sis 0000:00:02.5: version 0.5.2
scsi0 : pata_sis
scsi1 : pata_sis
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1100 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1108 irq 15
usb 1-4: configuration #1 chosen from 1 choice
usb 1-4: New USB device found, idVendor=050d, idProduct=705a
usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-4: Product: Belkin 54g USB Network Adapter
usb 1-4: Manufacturer: Belkin
ata1.00: ATA-6: IC25N040ATMR04-0, MO2OAD4A, max UDMA/100
ata1.00: 78140160 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA IC25N040ATMR04-0 MO2O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1: new low speed USB device using ohci_hcd and address 2
usb 2-1: configuration #1 chosen from 1 choice
input: MOSART Semi. Wireless Keyboard & Mouse as /class/input/input6
input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:03.0-1
input: MOSART Semi. Wireless Keyboard & Mouse as /class/input/input7
input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. Wireless Keyboard & Mouse] on usb-0000:00:03.0-1
usb 2-1: New USB device found, idVendor=062a, idProduct=0102
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1: Product: Wireless Keyboard & Mouse
usb 2-1: Manufacturer: MOSART Semi.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
type=1404 audit(1251465265.570:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 8192 avtab hash slots, 228192 rules.
SELinux: 8192 avtab hash slots, 228192 rules.
SELinux: 8 users, 12 roles, 2519 types, 116 bools, 1 sens, 1024 cats
SELinux: 67 classes, 228192 rules
SELinux: class peer not defined in policy
SELinux: class capability2 not defined in policy
SELinux: permission open in class dir not defined in policy
SELinux: permission open in class file not defined in policy
SELinux: permission open in class chr_file not defined in policy
SELinux: permission open in class blk_file not defined in policy
SELinux: permission open in class fifo_file not defined in policy
SELinux: permission recvfrom in class node not defined in policy
SELinux: permission sendto in class node not defined in policy
SELinux: permission ingress in class netif not defined in policy
SELinux: permission egress in class netif not defined in policy
SELinux: permission setfcap in class capability not defined in policy
SELinux: permission forward_in in class packet not defined in policy
SELinux: permission forward_out in class packet not defined in policy
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: policy loaded with handle_unknown=allow
type=1403 audit(1251465266.697:3): policy loaded auid=4294967295 ses=4294967295
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: AC Adapter [AC] (on-line)
sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1400
ACPI: Battery Slot [BAT0] (battery absent)
sis900.c: v1.08.10 Apr. 2 2006
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19
0000:00:04.0: ICS LAN PHY transceiver found at address 1.
0000:00:04.0: Using transceiver found at address 1 as default
eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 19, 00:40:d0:61:a2:9c
udev: renamed network interface eth0 to eth1
Yenta: CardBus bridge found at 0000:00:09.0 [1631:c004]
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:00:09.0, mfunc 0x01021002, devctl 0x64
input: PC Speaker as /class/input/input8
Yenta: ISA IRQ mask 0x0cf8, PCI irq 17
Socket status: 30000006
phy0: Selected rate control algorithm 'pid'
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
Registered led device: rt73usb-phy0:radio
Registered led device: rt73usb-phy0:assoc
Registered led device: rt73usb-phy0:quality
usbcore: registered new interface driver rt73usb
udev: renamed network interface wlan0 to wlan1
intel8x0_measure_ac97_clock: measured 50441 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 18
usbcore: registered new interface driver snd-usb-audio
SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
device-mapper: multipath: version 1.0.5 loaded
loop: module loaded
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
fuse init (API version 7.9)
SELinux: initialized (dev sda1, type fuseblk), uses genfs_contexts
type=1400 audit(1251461702.869:4): avc: denied { getattr } for pid=1445 comm="pam_console_app" path="/dev/fb0" dev=tmpfs ino=5580 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
type=1400 audit(1251461702.869:5): avc: denied { getattr } for pid=1445 comm="pam_console_app" path="/dev/fb1" dev=tmpfs ino=5581 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
type=1400 audit(1251461702.869:6): avc: denied { getattr } for pid=1445 comm="pam_console_app" path="/dev/fb2" dev=tmpfs ino=5582 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
type=1400 audit(1251461702.869:7): avc: denied { getattr } for pid=1445 comm="pam_console_app" path="/dev/fb3" dev=tmpfs ino=5583 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
type=1400 audit(1251461702.869:8): avc: denied { getattr } for pid=1445 comm="pam_console_app" path="/dev/fb4" dev=tmpfs ino=5584 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
type=1400 audit(1251461702.869:9): avc: denied { getattr } for pid=1445 comm="pam_console_app" path="/dev/fb5" dev=tmpfs ino=5585 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
type=1400 audit(1251461702.869:10): avc: denied { getattr } for pid=1445 comm="pam_console_app" path="/dev/fb6" dev=tmpfs ino=5586 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
type=1400 audit(1251461702.869:11): avc: denied { getattr } for pid=1445 comm="pam_console_app" path="/dev/fb7" dev=tmpfs ino=5587 scontext=system_u:system_r:pam_console_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
Adding 1441784k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:1441784k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
firmware: requesting intel-ucode/0f-02-09
IA-32 Microcode Update Driver: v1.14a tigran@aivazian.fsnet.co.uk
microcode: CPU0 updated from revision 0x17 to 0x2e, date = 08112004
warning: process `kudzu' used the deprecated sysctl system call with 1.23.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (11264 buckets, 45056 max)
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use)
firmware: requesting rt73.bin
ADDRCONF(NETDEV_UP): wlan1: link is not ready
eth1: Media Link Off
ADDRCONF(NETDEV_UP): eth1: link is not ready
wlan1: authenticate with AP 00:19:55:9e:28:e0
wlan1: authenticated
wlan1: associate with AP 00:19:55:9e:28:e0
wlan1: RX AssocResp from 00:19:55:9e:28:e0 (capab=0x421 status=0 aid=160)
wlan1: associated
ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
wlan1: disassociating by local choice (reason=3)
wlan1: no IPv6 routers present
wlan1: authenticate with AP 00:19:55:9e:28:e0
wlan1: authenticate with AP 00:19:55:9e:28:e0
wlan1: authenticated
wlan1: associate with AP 00:19:55:9e:28:e0
wlan1: RX AssocResp from 00:19:55:9e:28:e0 (capab=0x421 status=0 aid=162)
wlan1: associated
wlan1: authenticate with AP 00:19:55:9e:28:e0
wlan1: deauthenticated
wlan1: authenticate with AP 00:19:55:9e:28:e0
wlan1: authenticated
wlan1: associate with AP 00:19:55:9e:28:e0
wlan1: RX ReassocResp from 00:19:55:9e:28:e0 (capab=0x421 status=0 aid=163)
wlan1: associated
atkbd.c: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
atkbd.c: Use 'setkeycodes 6d keycode' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x6d on isa0060/serio0).
atkbd.c: Use 'setkeycodes 6d keycode' to make it known.
atkbd.c: Unknown key pressed (translated set 2, code 0x6d on isa0060/serio0).
atkbd.c: Use 'setkeycodes 6d keycode' to make it known.
atkbd.c: Unknown key released (translated set 2, code 0x6d on isa0060/serio0).
atkbd.c: Use 'setkeycodes 6d keycode' to make it known.
wlan1: deauthenticated
wlan1: authenticate with AP 00:19:55:9e:28:e0
wlan1: authenticated
wlan1: associate with AP 00:19:55:9e:28:e0
wlan1: RX ReassocResp from 00:19:55:9e:28:e0 (capab=0x421 status=0 aid=164)
wlan1: associated
process `skype' is using obsolete setsockopt SO_BSDCOMPAT
usb 3-3: new full speed USB device using ohci_hcd and address 2
usb 3-3: configuration #1 chosen from 1 choice
usb 3-3: New USB device found, idVendor=046d, idProduct=08a2
usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[root@localhost ~]# lsusb Bus 001 Device 003: ID 050d:705a Belkin Components F5D7050A Wireless Adapter Bus 001 Device 001: ID 1d6b:0002 Bus 003 Device 002: ID 046d:08a2 Logitech, Inc. Labtec WebCam Pro Bus 003 Device 001: ID 1d6b:0001 Bus 002 Device 002: ID 062a:0102 Creative Labs Bus 002 Device 001: ID 1d6b:0001
Tahle kamera by mela v pohode fungovat s ovladacem gspca, ktery je v novych jadrech primo.
Podporovana je
28.8.2009 11:10
michich | skóre: 51
| blog: ohrivane_parky
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.