hauppauge wintv hvr-1200 a tvtime

mam v titulku spominanu tv kartu a chcel som pozerat tv cez tiez hore spomenuty program
hold problem v tvtime mi vypisuje
no signal
no such file or directory
cannot open capture device /dev/video0
takze som zacal hladat po webe nejake riesenie no nepodarilo sa mi myslel som tiez ci nie je problem s tv kartou ale ako uplny zaciatocnik som s toho pako ale dam sem vypis z dmesg a lspci
dmesg
[ 11.085548] Linux video capture interface: v2.00
[ 11.115210] cx23885 driver version 0.0.1 loaded
[ 11.115602] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 11.115608] cx23885 0000:04:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 11.115773] CORE cx23885[0]: subsystem: 0070:71d3, board: Hauppauge WinTV-HVR1200 [card=7,autodetected]
[ 11.125540] usb 2-4: reset full speed USB device using ohci_hcd and address 4
[ 11.282727] tveeprom 2-0050: Hauppauge model 71949, rev H2E9, serial# 3004168
[ 11.282732] tveeprom 2-0050: MAC address is 00-0D-FE-2D-D7-08
[ 11.282734] tveeprom 2-0050: tuner model is Philips 18271_8295 (idx 149, type 54)
[ 11.282738] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4)
[ 11.282740] tveeprom 2-0050: audio processor is CX23885 (idx 39)
[ 11.282742] tveeprom 2-0050: decoder processor is CX23885 (idx 33)
[ 11.282744] tveeprom 2-0050: has no radio
[ 11.282746] cx23885[0]: hauppauge eeprom: model=71949
[ 11.282749] cx23885_dvb_register() allocating 1 frontend(s)
[ 11.284025] cx23885[0]: cx23885 based dvb card
lspci
04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder (rev 02)
aspon podla toho co som cital po webe by to malo spolu suvisiet
mohol by mi teda niekto poradit co a ako aby mi to islo? zatial dik

Dotaz: hauppauge wintv hvr-1200 a tvtime