Debian Winfast DTV1800H

Dobry den, mam problem se zprovoznenim TV karty. Postupoval jsem podle navodu http://www.abclinuxu.cz/hardware/pridavne-karty/televizni-karty/dvb-t/pci/leadtek-winfast-dtv1800-h . Nahral jsem firmware, ktery ale nefunguje. Hlasi mi to nasledujici vystup v dmesgu:


[   67.398122] cx88[0]: Calling XC2028/3028 callback

[   67.550119] xc2028 2-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.

[   67.550119] cx88[0]: Calling XC2028/3028 callback

[   68.257290] i2c-adapter i2c-2: sendbytes: NAK bailout.

[   68.257290] xc2028 2-0061: i2c output error: rc = -5 (should be 4)

[   68.257290] xc2028 2-0061: -5 returned from send

[   68.257290] xc2028 2-0061: Error -22 while loading base firmware

[   68.316604] cx88[0]: Calling XC2028/3028 callback

[   68.463521] xc2028 2-0061: Loading firmware for type=BASE FM (401), id 0000000000000000.

[   68.463521] cx88[0]: Calling XC2028/3028 callback

[   69.171523] i2c-adapter i2c-2: sendbytes: NAK bailout.

[   69.171523] xc2028 2-0061: i2c output error: rc = -5 (should be 4)

[   69.171523] xc2028 2-0061: -5 returned from send

[   69.171523] xc2028 2-0061: Error -22 while loading base firmware

Chtel bych se zeptat, zdali tento problem jiz nekdo nevyresil, protoze jsem dlouhou dobu hledal a nic jsem nenasel. Predem dekuji za odpovedi.

Dotaz: Debian Winfast DTV1800H

Odpovědi