Dotaz: nastaveni dhcp

[Robert]

Zdravim, mam fungujici dhcp a bootovani ze site, ale prisel "rozkaz" ze rozsah 192.168.1.x je plny a nove PC se maji davat na 192.168.2.x, ale nejak jsem to nepobral a ted nevim jak nastavit dhcpd.conf a zda nebude problem s bootovanim po siti. Nejsem sitar takze se radeji ptam.Vyrez ze stavajiciho je zde:

subnet 192.168.1.0 netmask 255.255.255.0 {
  range 192.168.1.210 192.168.1.230;
  option broadcast-address 192.168.1.255;
  option routers 192.168.1.1;


  host sklad1       { hardware ethernet 00:12:3f:42:18:d1; fixed-address 192.168.1.143; }
  host sklad2       { hardware ethernet 00:11:43:23:16:c3; fixed-address 192.168.1.144; }
  host sklad3       { hardware ethernet 00:12:3f:4a:19:c4; fixed-address 192.168.1.145; }
  host uctarna1     { hardware ethernet 00:12:3f:4a:32:c4; fixed-address 192.168.1.146; }
  host uctarna2     { hardware ethernet 00:12:3f:4a:31:d7; fixed-address 192.168.1.147; }

# Pro BOOT ze site
filename "/tftpboot/pxelinux.0";
next-server 192.168.1.149;
}

Casem se i par stavajicich z 192.168.1.x ma presunout do 192.168.2.x, proc nevim

Odpovědi

[Petr]

Ahoj, tftp protokol je routovatelny, tudiz by melo stacit vytvoris nastaveni pro novy subnet dle toho nastaveni, co uz mas. potom jen dobre nastavit routovani mezi temi sitemi (pokud mas na starost i router, pokud ne, tak se o to musi postarat jeho spravce...)

[Robert]

ahoj, tak jsem přidal subnet a zdá se že nic, jen pro kontrlu, ale podle mě by to mělo být OK:

subnet 192.168.1.0 netmask 255.255.255.0 {
  range 192.168.1.210 192.168.1.230;
  option broadcast-address 192.168.1.255;
  option routers 192.168.1.1;


  host sklad1       { hardware ethernet 00:12:3f:42:18:d1; fixed-address 192.168.1.143; }
  host sklad2       { hardware ethernet 00:11:43:23:16:c3; fixed-address 192.168.1.144; }
  host sklad3       { hardware ethernet 00:12:3f:4a:19:c4; fixed-address 192.168.1.145; }
  host uctarna1     { hardware ethernet 00:12:3f:4a:32:c4; fixed-address 192.168.1.146; }
  host uctarna2     { hardware ethernet 00:12:3f:4a:31:d7; fixed-address 192.168.1.147; }

# Pro BOOT ze site
filename "/tftpboot/pxelinux.0";
next-server 192.168.1.149;
}


subnet 192.168.2.0 netmask 255.255.255.0 {
  range 192.168.2.215 192.168.2.230;
  option broadcast-address 192.168.2.255;
  option routers 192.168.2.1;

  host mzdy       { hardware ethernet 00:02:a7:af:ee:e0; fixed-address 192.168.3.210; }

# Pro BOOOT ze site
filename "/tftpboot/pxelinux.0";
next-server 192.168.1.149;
}