Portál AbcLinuxu, 4. prosince 2025 08:59
6.7.2010 09:14
Konqui | skóre: 18
| blog: Konqui
| Rožnov pod Radhoštěm
/dev/sda:
ATA device, with non-removable media
Model Number: ST9160821AS
Serial Number: 5MA6K1FC
Firmware Revision: 3.BHE
Standards:
Supported: 7 6 5 4
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
cache/buffer size = 8192 KBytes
Capabilities:
LBA, IORDY(can be disabled)
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 1
Recommended acoustic management value: 254, current value: 0
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
Write cache
* Look-ahead
* WRITE_BUFFER command
* READ_BUFFER command
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* IDLE_IMMEDIATE with UNLOAD
* Gen1 signaling speed (1.5Gb/s)
* Phy event counters
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
88min for SECURITY ERASE UNIT. 88min for ENHANCED SECURITY ERASE UNIT.
Checksum: correct
a S.M.A.R.T
smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Seagate Momentus 5400.3 series
Device Model: ST9160821AS
Serial Number: 5MA6K1FC
Firmware Version: 3.BHE
User Capacity: 160 041 885 696 bytes
Device is: In smartctl database [for details use: -P show]
ATA Version is: 7
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Tue Jul 6 09:12:50 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 426) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 88) minutes.
SCT capabilities: (0x0001) SCT Status supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 114 100 006 Pre-fail Always - 67636253
3 Spin_Up_Time 0x0002 099 099 000 Old_age Always - 0
4 Start_Stop_Count 0x0033 096 096 020 Pre-fail Always - 4574
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0
7 Seek_Error_Rate 0x000f 065 057 030 Pre-fail Always - 236406738248
9 Power_On_Hours 0x0032 090 090 000 Old_age Always - 9206
10 Spin_Retry_Count 0x0013 100 100 034 Pre-fail Always - 0
12 Power_Cycle_Count 0x0033 097 097 020 Pre-fail Always - 3434
184 End-to-End_Error 0x0032 100 253 000 Old_age Always - 0
187 Reported_Uncorrect 0x003a 100 100 000 Old_age Always - 0
188 Command_Timeout 0x0022 100 098 045 Old_age Always - 4295032842
189 High_Fly_Writes 0x0032 072 072 000 Old_age Always - 28
190 Airflow_Temperature_Cel 0x0032 062 041 000 Old_age Always - 38 (Lifetime Min/Max 38/38)
192 Power-Off_Retract_Count 0x0022 100 100 000 Old_age Always - 1138
193 Load_Cycle_Count 0x001a 001 001 000 Old_age Always - 549597
194 Temperature_Celsius 0x0012 038 059 000 Old_age Always - 38 (0 10 0 0)
195 Hardware_ECC_Recovered 0x0010 077 055 000 Old_age Offline - 52158282
197 Current_Pending_Sector 0x003e 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0000 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0
202 Data_Address_Mark_Errs 0x0000 100 253 000 Old_age Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 925 -
# 2 Short offline Completed without error 00% 923 -
# 3 Extended offline Aborted by host 90% 275 -
# 4 Extended offline Completed without error 00% 275 -
# 5 Short offline Completed without error 00% 274 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Neví někdo co s tím?
Řešení dotazu:
hdparm -B 255
hdparm -S 0
Advanced power management level: 1 Recommended acoustic management value: 254, current value: 0Zkusil bych pro power management
(-B) a acoustic manatgement (-M) hdparm -B 254 -M 254 /dev/sda nebo -M 128, otázka je, co to nastavilo na 0.
6.7.2010 12:00
luta | skóre: 20
| blog: muj_blok
| Prostějov/Brno
6.7.2010 13:14
Konqui | skóre: 18
| blog: Konqui
| Rožnov pod Radhoštěm
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.
