Net-SNMP + lm-sensors

Zdravim

snažím se rozchodit monitoring z lm-sensors přes net-snmp, ale nějak se mi nedaří a už si nevím rady, několik hodiny jsem googloval a nic kloudného mi nepomohlo.

Sensors mi fungují viz:

coretemp-isa-0000 Adapter: ISA adapter Core 0: +34.0°C (crit = +100.0°C) coretemp-isa-0002 Adapter: ISA adapter Core 1: +33.0°C (crit = +100.0°C) w83627thf-isa-0290 Adapter: ISA adapter VCore: +1.14 V (min = +0.77 V, max = +1.23 V) +5V: +4.93 V (min = +4.75 V, max = +5.25 V) +12V: +11.65 V (min = +10.81 V, max = +13.22 V) V5SB: +4.89 V (min = +4.76 V, max = +5.24 V) +3.3V: +3.28 V (min = +2.40 V, max = +3.60 V) CASE Fan: 2410 RPM (min = 664 RPM, div = 8) M/B Temp: +54.0°C (high = +60.0°C, hyst = +56.0°C) sensor = thermistor CPU Temp: +38.5°C (high = +80.0°C, hyst = +75.0°C) sensor = diode beep_enable:disabled

když zkusím:

:~$ snmpwalk -v 2c -c public -m ALL localhost lmSensors LM-SENSORS-MIB::lmVoltSensorsIndex.1 = INTEGER: 0 LM-SENSORS-MIB::lmVoltSensorsIndex.2 = INTEGER: 1 LM-SENSORS-MIB::lmVoltSensorsIndex.3 = INTEGER: 2 LM-SENSORS-MIB::lmVoltSensorsIndex.4 = INTEGER: 3 LM-SENSORS-MIB::lmVoltSensorsDevice.1 = STRING: VCore LM-SENSORS-MIB::lmVoltSensorsDevice.2 = STRING: VCore LM-SENSORS-MIB::lmVoltSensorsDevice.3 = STRING: VCore LM-SENSORS-MIB::lmVoltSensorsDevice.4 = STRING: VCore LM-SENSORS-MIB::lmVoltSensorsValue.1 = Gauge32: 1151 LM-SENSORS-MIB::lmVoltSensorsValue.2 = Gauge32: 768 LM-SENSORS-MIB::lmVoltSensorsValue.3 = Gauge32: 1231 LM-SENSORS-MIB::lmVoltSensorsValue.4 = Gauge32: 0 LM-SENSORS-MIB::lmMiscSensorsIndex.1 = INTEGER: 0 LM-SENSORS-MIB::lmMiscSensorsIndex.2 = INTEGER: 1 LM-SENSORS-MIB::lmMiscSensorsIndex.3 = INTEGER: 2 LM-SENSORS-MIB::lmMiscSensorsIndex.4 = INTEGER: 3 LM-SENSORS-MIB::lmMiscSensorsIndex.5 = INTEGER: 4 LM-SENSORS-MIB::lmMiscSensorsIndex.6 = INTEGER: 5 LM-SENSORS-MIB::lmMiscSensorsDevice.1 = STRING: Core 0 LM-SENSORS-MIB::lmMiscSensorsDevice.2 = STRING: Core 0 LM-SENSORS-MIB::lmMiscSensorsDevice.3 = STRING: Core 0 LM-SENSORS-MIB::lmMiscSensorsDevice.4 = STRING: Core 1 LM-SENSORS-MIB::lmMiscSensorsDevice.5 = STRING: Core 1 LM-SENSORS-MIB::lmMiscSensorsDevice.6 = STRING: Core 1 LM-SENSORS-MIB::lmMiscSensorsValue.1 = Gauge32: 34000 LM-SENSORS-MIB::lmMiscSensorsValue.2 = Gauge32: 100000 LM-SENSORS-MIB::lmMiscSensorsValue.3 = Gauge32: 0 LM-SENSORS-MIB::lmMiscSensorsValue.4 = Gauge32: 33000 LM-SENSORS-MIB::lmMiscSensorsValue.5 = Gauge32: 100000 LM-SENSORS-MIB::lmMiscSensorsValue.6 = Gauge32: 0

Mám tam jen teploty jader a ty jestě nesouhlasí, už jsem to zkoušel přeinstalovat a stále nic...

výpis snmpd.conf:

com2sec readonly default public group MyROSystem v1 paranoid group MyROSystem v2c paranoid group MyROSystem usm paranoid group MyROGroup v1 readonly group MyROGroup v2c readonly group MyROGroup usm readonly group MyRWGroup v1 readwrite group MyRWGroup v2c readwrite group MyRWGroup usm readwrite view all included .1 80 view system included .1.3.6.1.2.1.1 access MyROSystem "" any noauth exact system none none access MyROGroup "" any noauth exact all none none access MyRWGroup "" any noauth exact all all none syslocation xxx syscontact xxxxxxx

Používám Ubuntu server 10.04 LTS,
NET-SNMP version 5.4.2.1
lm-sensors version 1:3.1.2-2

Prosím, co mám udělat aby mi to dalo korektní hodnoty?

Předem díky za odpověď.

Dotaz: Net-SNMP + lm-sensors

Odpovědi