Portál AbcLinuxu, 6. května 2025 16:34

Dotaz: Vysoká spotřeba po reinstalaci Archu na notebooku HP ProBook 4520s

19.3.2011 12:38 cheaf
Vysoká spotřeba po reinstalaci Archu na notebooku HP ProBook 4520s
Přečteno: 658×
Odpovědět | Admin
Ahojte,

před pár dny jsem přeinstaloval svůj (neaktulizovaný) Arch linux. Samozřejmě, že s novou instalací se mi nahrály do systému aktuální verze aplikací a tudíž i kernelu. Bohužel se mi v novém archu nedaří "srazit" spotřebu i přesto, že jsem systém nakonfiguroval stejně, jako ten starý. Dřív jsem v idle stavu měl 11-13 W a notebook vydržel 4 a půl hodiny, teď se nemohu dostat pod 17 W a můj ntb vydrží tak 2 hoďky v idle stavu. Ve "starém" archu bylo jádro 2.6.37 a v novém je 2.6.37-ARCH #1 Také ovladače grafické karty byli starší a nyní jsou 8.82.8. Podezřívám ovladače na grafickou kartu, že nefunguje regulace výkonu (podtaktování zřejmě funguje, ale proud grafickou kartou teče pořád maximální, pokud se nepletu - viz. aticonfig --odgc)

Notebook: HP ProBook 4520s Procesor: Intel(R) Core(TM) i3 CPU M 37 Grafická karta: ATI Mobility Radeon HD 5000 Series Wifi: RaLink RT3090

Nenapadá někoho, kde by mohl být problém ?

Díky

[cheaf2@cheaf-ntb ~]$ aticonfig --odgc
	Default Adapter - ATI Mobility Radeon HD 5400 Series 
								Core (MHz)    Memory (MHz)
			Current Clocks :    157           200
				Current Peak :    750           800
	Configurable Peak Range : [400-750]     [500-800]
					GPU load :    0%
Obávám se, že ta vysoká spotřeba je způsobená ne-omezováním průtoku proudu graf. kartou - ale možná, že se pletu, ale nevím přoč tam nemůže být current peak max: 400

[cheaf2@cheaf-ntb ~]$ uname -a
Linux cheaf-ntb 2.6.37-ARCH #1 SMP PREEMPT Tue Mar 15 09:21:17 CET 2011 x86_64 Intel(R) Core(TM) i3 CPU M 370 @ 2.40GHz GenuineIntel GNU/Linux
[cheaf2@cheaf-ntb ~]$ lspci
	00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
	00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
	00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
	00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
	00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
	00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
	00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
	00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 05)
	00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
	00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
	00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
	00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
	00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 05)
	01:00.0 VGA compatible controller: ATI Technologies Inc Manhattan [Mobility Radeon HD 5000 Series]
	01:00.1 Audio device: ATI Technologies Inc Manhattan HDMI Audio [Mobility Radeon HD 5000 Series]
	44:00.0 Network controller: RaLink RT3090 Wireless 802.11n 1T/1R PCIe
	45:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
	ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
	ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
	ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
	ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
	ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
	ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)

	[cheaf2@cheaf-ntb ~]$ lsusb
	Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
	Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
	Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
	Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
	Bus 001 Device 003: ID 0461:4db6 Primax Electronics, Ltd 
	Bus 002 Device 003: ID 04b4:0060 Cypress Semiconductor Corp.
Část rc.conf:
	MODULES=( !pcspkr !rt2800pci !rt2x00usb !rt2x00pci !rt2x00lib !rt2800lib !mac80211 rt2860sta fglrx acpi-cpufreq cpufreq-ondemand cpufreq-powersave !radeon)
	DAEMONS=(syslog-ng acpid dbus cpufreqd alsa network networkmanager netfs crond hpfall kdm laptop-mode)
[cheaf2@cheaf-ntb ~]$ acpi
	Battery 0: Discharging, 78%, 01:26:57 remaining

	Powertop:
	Cn                Avg residency       P-states (frequencies)
	C0 (cpu running)        ( 0,0%)         2,40 Ghz     0,8%
	polling           0,0ms ( 0,0%)         2,27 Ghz     0,0%
	C1 mwait          0,1ms ( 0,0%)         2,14 Ghz     0,0%
	C2 mwait          3,8ms ( 9,6%)         1066 Mhz     0,6%
	C3 mwait          6,1ms (97,8%)          933 Mhz    98,6%

	Wakeups-from-idle per second : 188,4    interval: 5,0s                                                                                                                      
	Power usage (ACPI estimate): 17,7W (1,9 hours)

	Top causes for wakeups:
	21,4% ( 46,8)   [hda_intel] &l;interrupt>
	20,7% ( 45,2)   [ehci_hcd:usb2] &l;interrupt>
	19,0% ( 41,6)   USB device 2-1.2 : USB Device (Areson)
	10,6% ( 23,2)   kworker/0:1
	9,1% ( 20,0)   knotify4
	5,3% ( 11,6)   [kernel scheduler] Load balancing tick
	3,7% (  8,2)   kworker/0:0
	1,9% (  4,2)   [ahci] &l;interrupt>
	1,8% (  4,0)   [acpi] &l;interrupt>
	1,5% (  3,2)   /sys/bus/usb/devices/2-1
	0,9% (  2,0)   [kernel core] clocksource_watchdog (clocksource_watchdog)
	0,6% (  1,4)   cpufreqd
	0,5% (  1,2)   kwin
	0,5% (  1,0)   khubd
	0,5% (  1,0)   USB device usb2 : EHCI Host Controller (Linux 2.6.37-ARCH ehci_hcd)
	0,4% (  0,8)   [kernel core] hrtimer_start (tick_sched_timer)
	0,4% (  0,8)   udisks-daemon
	0,3% (  0,6)   yakuake
	0,2% (  0,4)   NetworkManager
	0,1% (  0,2)   [fglrx[0]@PCI:1:0:0] &l;interrupt>
	0,1% (  0,2)   X
	0,1% (  0,2)   kworker/3:0
	0,1% (  0,2)   crond
[cheaf2@cheaf-ntb ~]$ cat /etc/cpufreqd.conf
	[General]                                                                                                                                                                   
	pidfile=/var/run/cpufreqd.pid                                                                                                                                               
	poll_interval=3                                                                                                                                                             
	enable_plugins=acpi_ac, acpi_battery                                                                                                                                        
	enable_remote=1
	remote_group=wheel                                                                                                                                                          
	verbosity=5                                                                                                                                                                 
	[/General]                                                                                                                                                                  
																																												
	[Profile]                                                                                                                                                                   
	name=ondemand
	minfreq=0%
	maxfreq=100%
	policy=ondemand
	[/Profile]

	[Profile]
	name=conservative
	minfreq=0%
	maxfreq=100%
	policy=conservative
	[/Profile]

	[Profile]
	name=powersave
	minfreq=0%
	maxfreq=50%
	policy=powersave
	[/Profile]

	[Profile]
	name=performance
	minfreq=0%
	maxfreq=100%
	policy=performance
	[/Profile]

	[Rule]
	name=battery
	ac=off
	profile=powersave
	[/Rule]

	[Rule]
	name=ac
	ac=on
	profile=ondemand
	[/Rule]
[cheaf2@cheaf-ntb ~]$ dmesg |grep fglrx
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
	[fglrx] Maximum main memory to use for locked dma buffers: 3656 MBytes.
	[fglrx]   vendor: 1002 device: 68e0 count: 1
	[fglrx] ioport: bar 4, base 0x5000, size: 0x100
	[fglrx] Kernel PAT support is enabled
	[fglrx] module loaded - fglrx 8.82.8 [Jan 26 2011] with 1 minors
	fglrx_pci 0000:01:00.0: irq 49 for MSI/MSI-X
	[fglrx] Firegl kernel thread PID: 3922
	[fglrx] Firegl kernel thread PID: 3923
	[fglrx] Firegl kernel thread PID: 3924
	[fglrx] IRQ 49 Enabled
	[fglrx] Gart USWC size:1192 M.
	[fglrx] Gart cacheable size:473 M.
	[fglrx] Reserved FB block: Shared offset:0, size:1000000 
	[fglrx] Reserved FB block: Unshared offset:f943000, size:3bd000 
	[fglrx] Reserved FB block: Unshared offset:1fff4000, size:c000 
Nástroje: Začni sledovat (1) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

19.3.2011 12:44 pakanek | skóre: 28 | Vyškov
Rozbalit Rozbalit vše Re: Vysoká spotřeba po reinstalaci Archu na notebooku HP ProBook 4520s
Odpovědět | | Sbalit | Link | Blokovat | Admin
Nepomohl by program Powertop?
Všechno dobré je pro něco zlé.
19.3.2011 12:59 cheaf.[cz]
Rozbalit Rozbalit vše Re: Vysoká spotřeba po reinstalaci Archu na notebooku HP ProBook 4520s
Powertop tam je, ale omlouvám se, je pod příkazem [cheaf2@cheaf-ntb ~]$ acpi

Založit nové vláknoNahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.