Creative Sound Maker Live + ALSA

predpokladam : pouziti verze 0.9.x (doporucuji x=10)

ze mate vsechno prekopilovany a nainstalovany (./configure;make;su -c"make install") je dobre mit to pro driver, alsa-lib a alsa-utils

takze: tohle bych dal do modules.conf:

# ALSA native device support alias char-major-116 snd options snd snd_major=116 snd_cards_limit=1 alias snd-card-0 snd-card-fm801 options snd-card-fm801

# OSS/Free setup alias char-major-14 soundcore alias sound-slot-0 snd-card-0 alias sound-service-0-0 snd-mixer-oss alias sound-service-0-1 snd-seq-oss alias sound-service-0-3 snd-pcm-oss alias sound-service-0-8 snd-seq-oss alias sound-service-0-12 snd-pcm-oss

podobnou vec jako tohle bych odtama asi oddelal:

alias sound-slot-0 via82cxxx_audio post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || : pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S >/dev/null 2>&1 || :

pak este musite spustit v adresari alsa-driver- ... skript 'snddevices' asi takhle: 'su -c"./snddevices"'

potom je dobry si zapnout startovani driveru pro runlevel 3 a 5. dela se to pomoci chkconfig (viz man) sluzba se jmenuse alsa (ale myslim si ze se to spousti i samo v pripade, ze najaky SW chce pracovat s audio zarizenim.

vb ps: jinak fsechy informace se daji zjistit v:

man, alsa-driver-.../INSTALL, alsa-faq ... jenom gdyby se chtelo, ze? ps1:alsa je fak dobra (kombinace kde+arts+alsa)

Zatim jsem trochu postoupil, ale zvuk porad nejde. :-(

Toto jsem dal do /etc/modules.conf

# ALSA native device support alias char-major-116 snd
 options snd snd_major=116 snd_cards_limit=1
 alias snd-card-0 snd-card-fm801
 options snd-card-fm801

# OSS/Free setup
 alias char-major-14 soundcore
 alias sound-slot-0 snd-card-0
 alias sound-service-0-0 snd-mixer-oss
 alias sound-service-0-1 snd-seq-oss
 alias sound-service-0-3 snd-pcm-oss
 alias sound-service-0-8 snd-seq-oss
 alias sound-service-0-12 snd-pcm-oss

A takto vypada /proc/modules snd-mixer-oss 8976 0 (autoclean)
 binfmt_misc 5872 1
 snd-synth-opl3 8752 0 (unused)
 snd-seq-midi-emul 4736 0 [snd-synth-opl3]
 snd-seq-instr 5264 0 [snd-synth-opl3]
 snd-seq 37424 0 [snd-synth-opl3
snd-seq-midi-emul snd-seq-instr] snd-ainstr-fm 1264 0 [snd-synth-opl3]
 snd-card-fm801 7568 0
 snd-pcm 50816 0 [snd-card-fm801]
 snd-opl3 5584 0 [snd-synth-opl3
snd-card-fm801] snd-timer 10288 0 [snd-seq snd-pcm
snd-opl3] snd-hwdep 3408 0 [snd-opl3]
 snd-mpu401-uart 3008 0 [snd-card-fm801]
 snd-rawmidi 12512 0
[snd-mpu401-uart] snd-seq-device 3776 0 [snd-synth-opl3
snd-seq snd-opl3 snd-rawmidi] snd-ac97-codec 23152 0 [snd-card-fm801]
 snd 25856 1 [snd-mixer-oss
snd-synth-opl3 snd-seq-instr snd-seq snd-card-fm801 snd-pcm snd-opl3 snd-timer
snd-hwdep snd-mpu401-uart snd-rawmidi snd-seq-device snd-ac97-codec]
 soundcore 3952 4 [snd]

Nevim jestli z toho lze neco vycist, ale pro jistotu to sem dam. Je to vypis ze souboru /proc/asound/sndstat. Sound Driver:3.8.1a-980706 (ALSA v0.9.0beta10 emulation code) Kernel: Linux reaper 2.4.17 #2 SMP St led 30 17:29:33 GMT-5 2002 i686 Config options: 0

Installed drivers: Type 10: ALSA emulation

Card config: ForteMedia FM801-AU at 0xe800, irq 17

Audio devices: NOT ENABLED IN CONFIG

Synth devices: 0: OPL3 FM

Midi devices: 0: MPU-401 (UART)

Timers: 7: system timer

Mixers: 0: mixer00

Jedine co me napada je to, ze musim udelat neco s programem amixer. Zkousel jsem sice vse co jsem nasel v howto dokumentech (ano, ac je to neuveritelne, tak ja ctu taky ruzne napovedy a neni mi lhostejne ze mi nejde zvuk), ale mozna mi neco uniklo. Fakt nevim co mam ted nastavit. Myslim (doufam) ale, ze ovladace jsou nainstalovane spravne. Nebo ne?

Dotaz: Creative Sound Maker Live + ALSA

Odpovědi