Dotaz: TV out na Ge Force2 MX 400

[dekon]

Dneska se poukousim rozjet TV out na Ge Force 2 MX 400. Uz jsem tady jednou daval dotaz na tohle tema a wong s Tomahawkem mi poradili YanC.

Přes ten mi to ale nejde, tak to zkousim editovanim XF86Config-4. Stále se mi to ale nedari.

Proto Vas prosim, jestli byste mi neporadili.

Moje XF86Config-4:

Section "Device" Identifier "device1" VendorName "nVidia Corporation" BoardName "NVIDIA GeForce2 DDR (generic)" Driver "nvidia" Option "DPMS" Option "TwinView" "true" Option "TwinViewOrientation" "Clone" Option "ConnectedMonitor" "CRT,TV" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; 640x480, 640x480;" Option "TVStandard" "PAL-B" EndSection

Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24

Subsection "Display" Depth 8 Modes "800x600" "640x480" EndSubsection

Subsection "Display" Depth 15 Modes "1024x768" "800x600" "640x480" EndSubsection

Subsection "Display" Depth 16 Modes "1024x768" "800x600" "640x480" EndSubsection

Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" EndSubsection EndSection Co to je to Subsection to nevim, to tam bylo ještě driv, nez jsem se v tom zacal vrat. Ja sem tam pridal:

Option "TwinView" "true" Option "TwinViewOrientation" "Clone" Option "ConnectedMonitor" "CRT,TV" Option "SecondMonitorHorizSync" "30-50" Option "SecondMonitorVertRefresh" "60" Option "MetaModes" "1024x768, 1024x768; 800x600, 800x600; 640x480, 640x480;" Option "TVStandard" "PAL-B"

Za radu budu vdecny.

Díky.

Odpovědi

[dekon]

Má to S-Video výstup.

[happy]

stiahni si soft nvtv a tam to nastav

[dekon]

nvtv mi nejde zkompilovat - make[1] Leaving directory. Co to je???? Configure proběhne v pohodě.

[dekon]

To make se zasekne az ke konci. To jenom, abych nevipadal jako vul, kdyz pisu, ze confugure probehlo v pohode.

[Niemand]

Ja mam podobny problem, nastavoval jsem XF86Config asi desetkrat pomoci vsech moznych rad a navodu, ale rozjet se mi to podarilo pouze tak, ze bud jel jen monitor, nebo TV. Clone proste nejelo ani za boha. Mam Ge Force 4200.