Portál AbcLinuxu, 12. května 2025 07:08
# ipmitool sdr Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/ipmidev/0: No such file or directory Get Device ID command failed Unable to open SDR for readingskúšal som aj
modprobe ipmi_devintf modprobe ipmi_msghandler modprobe ipmi_poweroff modprobe ipmi_si modprobe ipmi_watchdogpodľa tehto návodu ale stále nič. Vedel by mi prosím niekto s týmto poradiť? Ďakujem
Řešení dotazu:
ipmi_devintf 8097 0 ipmi_si 42433 0 ipmi_msghandler 35992 2 ipmi_devintf,ipmi_siDale je otazka, jestli ten server vubec ma IPMI.
[2140719.168470] ipmi message handler version 39.2 [2140719.180877] ipmi device interface [2140730.110722] IPMI System Interface driver. [2140730.110890] ipmi_si: Adding SMBIOS-specified kcs state machine [2140730.110909] ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [2140730.193169] ipmi: Found new BMC (man_id: 0x000157, prod_id: 0x0028, dev_id: 0x20) [2140730.193227] IPMI kcs interface initialized
root@noro:~# dmesg| grep ipmi [ 428.832995] ipmi message handler version 39.2 [ 428.835106] ipmi device interface [ 453.413045] ipmi_si: Unable to find any System Interface(s) [ 1368.756046] ipmi_si: Unable to find any System Interface(s)a ani mi neide zaviesť tento modul
#modprobe ipmi_si FATAL: Error inserting ipmi_si (/lib/modules/2.6.32-5-amd64/kernel/drivers/char/ipmi/ipmi_si.ko): No such device
# cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 67 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 3 cpu MHz : 2799.572 cache size : 1024 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 5599.14 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 67 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 3 cpu MHz : 2799.572 cache size : 1024 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow rep_good extd_apicid pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 5599.87 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stca ešte
# lspci 00:00.0 Host bridge: ATI Technologies Inc RS690 Host Bridge 00:01.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (Internal gfx) 00:07.0 PCI bridge: ATI Technologies Inc RS690 PCI to PCI Bridge (PCI Express Port 3) 00:12.0 SATA controller: ATI Technologies Inc SB600 Non-Raid-5 SATA 00:13.0 USB Controller: ATI Technologies Inc SB600 USB (OHCI0) 00:13.1 USB Controller: ATI Technologies Inc SB600 USB (OHCI1) 00:13.2 USB Controller: ATI Technologies Inc SB600 USB (OHCI2) 00:13.3 USB Controller: ATI Technologies Inc SB600 USB (OHCI3) 00:13.4 USB Controller: ATI Technologies Inc SB600 USB (OHCI4) 00:13.5 USB Controller: ATI Technologies Inc SB600 USB Controller (EHCI) 00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 14) 00:14.1 IDE interface: ATI Technologies Inc SB600 IDE 00:14.3 ISA bridge: ATI Technologies Inc SB600 PCI to LPC Bridge 00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 VGA compatible controller: ATI Technologies Inc RS690 [Radeon X1200 Series] 01:05.2 Audio device: ATI Technologies Inc Radeon X1200 Series Audio Controller 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01) 03:02.0 RAID bus controller: 3ware Inc 7xxx/8xxx-series PATA/SATA-RAID (rev 01)
6.10.2012 22:03
Tomáš Bžatek | skóre: 29
| Brno
7.10.2012 20:45
Tomáš Bžatek | skóre: 29
| Brno
# dmidecode 2.9 SMBIOS 2.5 present. 48 structures occupying 1798 bytes. Table at 0x000FB8E0. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: V1.5B2 Release Date: 10/31/2007 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 1024 kB Characteristics: ISA is supported PCI is supported PNP is supported APM is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 KB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 8.14 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: MICRO-STAR INTERANTIONAL CO.,LTD Product Name: MS-7368 Version: 1.0 Serial Number: To Be Filled By O.E.M. UUID: Not Present Wake-up Type: Power Switch SKU Number: To Be Filled By O.E.M. Family: To Be Filled By O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: MICRO-STAR INTERANTIONAL CO.,LTD Product Name: MS-7368 Version: 1.0 Serial Number: To be filled by O.E.M. Asset Tag: To Be Filled By O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To Be Filled By O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: To Be Filled By O.E.M. Type: Desktop Lock: Not Present Version: To Be Filled By O.E.M. Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 Handle 0x0004, DMI type 4, 40 bytes Processor Information Socket Designation: CPU 1 Type: Central Processor Family: Other Manufacturer: AMD ID: 33 0F 04 00 FF FB 8B 17 Version: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ Voltage: 1.5 V External Clock: 200 MHz Max Speed: 2800 MHz Current Speed: 2800 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: 0x0007 Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Core Count: 2 Core Enabled: 2 Characteristics: 64-bit capable Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 256 KB Maximum Size: 256 KB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Data Associativity: 4-way Set-associative Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 2048 KB Maximum Size: 2048 KB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: Unknown Error Correction Type: Single-bit ECC System Type: Unified Associativity: 4-way Set-associative Handle 0x0007, DMI type 7, 19 bytes Cache Information Socket Designation: L3-Cache Configuration: Disabled, Not Socketed, Level 3 Operational Mode: Unknown Location: Internal Installed Size: 0 KB Maximum Size: 0 KB Supported SRAM Types: Unknown Installed SRAM Type: Unknown Speed: Unknown Error Correction Type: Unknown System Type: Unknown Associativity: Unknown Handle 0x0008, DMI type 5, 20 bytes Memory Controller Information Error Detecting Method: 64-bit ECC Error Correcting Capabilities: None Supported Interleave: One-way Interleave Current Interleave: One-way Interleave Maximum Memory Module Size: 512 MB Maximum Total Memory Size: 1024 MB Supported Speeds: 70 ns 60 ns Supported Memory Types: SIMM DIMM SDRAM Memory Module Voltage: 3.3 V Associated Memory Slots: 2 0x0009 0x000A Enabled Error Correcting Capabilities: None Handle 0x0009, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM0 Bank Connections: 0 5 Current Speed: 161 ns Type: ECC DIMM Installed Size: 1024 MB (Single-bank Connection) Enabled Size: 1024 MB (Single-bank Connection) Error Status: OK Handle 0x000A, DMI type 6, 12 bytes Memory Module Information Socket Designation: DIMM1 Bank Connections: 0 5 Current Speed: 163 ns Type: ECC DIMM Installed Size: 1024 MB (Single-bank Connection) Enabled Size: 1024 MB (Single-bank Connection) Error Status: OK Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: PS2Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2 Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2 Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J4A1 Internal Connector Type: None External Reference Designator: LPT 1 External Connector Type: DB-25 male Port Type: Parallel Port ECP/EPP Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A1 Internal Connector Type: None External Reference Designator: COM A External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6A1 Internal Connector Type: None External Reference Designator: Audio Mic In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6A1 Internal Connector Type: None External Reference Designator: Audio Line In External Connector Type: Mini Jack (headphones) Port Type: Audio Port Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6B1 - AUX IN Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6B2 - CDIN Internal Connector Type: On Board Sound Input From CD-ROM External Reference Designator: Not Specified External Connector Type: None Port Type: Audio Port Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6J2 - PRI IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6J1 - SEC IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J4J1 - FLOPPY Internal Connector Type: On Board Floppy External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9H1 - FRONT PNL Internal Connector Type: 9 Pin Dual Inline (pin 10 cut) External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1B1 - CHASSIS REAR FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2F1 - CPU FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J8B4 - FRONT FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9G2 - FNT USB Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6C3 - FP AUD Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9G1 - CONFIG Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J8C1 - SCSI LED Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0020, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9J2 - INTRUDER Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0021, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J9G4 - ITP Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0022, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2H1 - MAIN POWER Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0023, DMI type 9, 13 bytes System Slot Information Designation: AGP Type: 32-bit AGP 4x Current Usage: In Use Length: Short ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0024, DMI type 9, 13 bytes System Slot Information Designation: PCI1 Type: 32-bit PCI Current Usage: In Use Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0025, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: To Be Filled By O.E.M. Handle 0x0026, DMI type 11, 5 bytes OEM Strings String 1: To Be Filled By O.E.M. Handle 0x0027, DMI type 12, 5 bytes System Configuration Options Option 1: To Be Filled By O.E.M. Handle 0x0028, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x0029, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 8 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x002A, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0011FFFFFFF Range Size: 4608 MB Physical Array Handle: 0x0029 Partition Width: 0 Handle 0x002B, DMI type 17, 27 bytes Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 72 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM0 Bank Locator: BANK0 Type: DDR2 Type Detail: Synchronous Speed: 333 MHz (3.0 ns) Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: PartNum0 Handle 0x002C, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0003FFFFFFF Range Size: 1 GB Physical Device Handle: 0x002B Memory Array Mapped Address Handle: 0x002A Partition Row Position: 1 Handle 0x002D, DMI type 17, 27 bytes Memory Device Array Handle: 0x0029 Error Information Handle: Not Provided Total Width: 64 bits Data Width: 72 bits Size: 1024 MB Form Factor: DIMM Set: None Locator: DIMM1 Bank Locator: BANK1 Type: DDR2 Type Detail: Synchronous Speed: 333 MHz (3.0 ns) Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: PartNum1 Handle 0x002E, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00040000000 Ending Address: 0x0007FFFFFFF Range Size: 1 GB Physical Device Handle: 0x002D Memory Array Mapped Address Handle: 0x002A Partition Row Position: 1 Handle 0x002F, DMI type 127, 4 bytes End Of Tablea existuje ešte nejaká iná možnosť, ako kontrolovať hardware? disky viem skonrolovať s tw_cli, teplotu procesorov so sensor, ale to je tak všetko, ventilárory neviem vôbec skontrolovať. Na inom dell servri používam ipmitool a omreport, ale tu si neviem dať rady s týmto.
# sensors
k8temp-pci-00c3
Adapter: PCI adapter
Core0 Temp: +29.0°C
Core1 Temp: +30.0°C
f71882fg-isa-0600
Adapter: ISA adapter
+3.3V: +3.28 V
in1: +1.30 V (max = +2.04 V)
in2: +1.10 V
in3: +0.96 V
in4: +0.72 V
in5: +0.58 V
in6: +0.46 V
3VSB: +3.26 V
Vbat: +3.17 V
fan1: 0 RPM ALARM
fan2: 0 RPM ALARM
fan3: 2702 RPM
fan4: 0 RPM ALARM
temp1: +29.0°C (high = +85.0°C, hyst = +81.0°C)
(crit = +100.0°C, hyst = +96.0°C) sensor = transistor
temp2: +126.0°C (high = +85.0°C, hyst = +81.0°C) ALARM
(crit = +100.0°C, hyst = +96.0°C) ALARM sensor = thermistor
temp3: +40.0°C (high = +70.0°C, hyst = +68.0°C)
(crit = +85.0°C, hyst = +83.0°C) sensor = thermistor
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.