Portál AbcLinuxu, 16. července 2025 05:25


Dotaz: Chybne disky, radic alebo kable?

13.5.2013 17:40 GeorgeWH | skóre: 42
Chybne disky, radic alebo kable?
Přečteno: 359×
Odpovědět | Admin
zdravim. cez vikend sa na 2 rovnakych diskoch (RAID1) objavili vadne sektory. zaujimave na tom je to, ze sa chyba vyskytla v uplne rovnaky cas. vadne sektory som skusal "precitat" pomocou hdparm --read-sector , nehodilo ziadnu chybu. na /dev/sde momentalne bezi longtest, zatial bez chyby. odchadzaju disky, alebo moze byt problem inde? doska uz bola raz reklamovana, nefungovali PS/2 porty.
May 11 14:46:31 server kernel: [6556958.684175] ata5.00: exception Emask 0x10 SAct 0x1f SErr 0x810000 action 0xe frozen
May 11 14:46:31 server kernel: [6556958.684238] ata5.00: irq_stat 0x00400000, PHY RDY changed
May 11 14:46:31 server kernel: [6556958.684275] ata5: SError: { PHYRdyChg LinkSeq }
May 11 14:46:31 server kernel: [6556958.684293] ata6.00: exception Emask 0x10 SAct 0x1f SErr 0x810000 action 0xe frozen
May 11 14:46:31 server kernel: [6556958.684298] ata6.00: irq_stat 0x00400000, PHY RDY changed
May 11 14:46:31 server kernel: [6556958.684302] ata6: SError: { PHYRdyChg LinkSeq }
May 11 14:46:31 server kernel: [6556958.684306] ata6.00: failed command: WRITE FPDMA QUEUED
May 11 14:46:31 server kernel: [6556958.684313] ata6.00: cmd 61/c0:00:57:c3:21/02:00:05:00:00/40 tag 0 ncq 360448 out
May 11 14:46:31 server kernel: [6556958.684315]          res 40/00:18:17:c6:21/00:00:05:00:00/40 Emask 0x10 (ATA bus error)
May 11 14:46:31 server kernel: [6556958.684318] ata6.00: status: { DRDY }
May 11 14:46:31 server kernel: [6556958.684321] ata6.00: failed command: WRITE FPDMA QUEUED
May 11 14:46:31 server kernel: [6556958.684327] ata6.00: cmd 61/c8:08:cf:bc:21/03:00:05:00:00/40 tag 1 ncq 495616 out
May 11 14:46:31 server kernel: [6556958.684329]          res 40/00:18:17:c6:21/00:00:05:00:00/40 Emask 0x10 (ATA bus error)
May 11 14:46:31 server kernel: [6556958.684332] ata6.00: status: { DRDY }
May 11 14:46:31 server kernel: [6556958.684334] ata6.00: failed command: WRITE FPDMA QUEUED
May 11 14:46:31 server kernel: [6556958.684340] ata6.00: cmd 61/10:10:97:c0:21/02:00:05:00:00/40 tag 2 ncq 270336 out
May 11 14:46:31 server kernel: [6556958.684341]          res 40/00:18:17:c6:21/00:00:05:00:00/40 Emask 0x10 (ATA bus error)
May 11 14:46:31 server kernel: [6556958.684344] ata6.00: status: { DRDY }
May 11 14:46:31 server kernel: [6556958.684347] ata6.00: failed command: WRITE FPDMA QUEUED
May 11 14:46:31 server kernel: [6556958.684353] ata6.00: cmd 61/60:18:17:c6:21/01:00:05:00:00/40 tag 3 ncq 180224 out
May 11 14:46:31 server kernel: [6556958.684354]          res 40/00:18:17:c6:21/00:00:05:00:00/40 Emask 0x10 (ATA bus error)
May 11 14:46:31 server kernel: [6556958.684357] ata6.00: status: { DRDY }
May 11 14:46:31 server kernel: [6556958.684360] ata6.00: failed command: WRITE FPDMA QUEUED
May 11 14:46:31 server kernel: [6556958.684365] ata6.00: cmd 61/b0:20:a7:c2:21/00:00:05:00:00/40 tag 4 ncq 90112 out
May 11 14:46:31 server kernel: [6556958.684367]          res 40/00:18:17:c6:21/00:00:05:00:00/40 Emask 0x10 (ATA bus error)
May 11 14:46:31 server kernel: [6556958.684370] ata6.00: status: { DRDY }
May 11 14:46:31 server kernel: [6556958.684379] ata6: hard resetting link
May 11 14:46:31 server kernel: [6556958.688006] ata5.00: cmd 61/10:18:97:c0:21/02:00:05:00:00/40 tag 3 ncq 270336 out
May 11 14:46:31 server kernel: [6556958.688006] ata5.00: cmd 61/60:08:17:c6:21/01:00:05:00:00/40 tag 1 ncq 180224 out
May 11 14:46:31 server kernel: [6556958.688006] ata5.00: cmd 61/b0:20:a7:c2:21/00:00:05:00:00/40 tag 4 ncq 90112 out
May 11 14:46:31 server kernel: [6556958.688006] ata5.00: cmd 61/c0:00:57:c3:21/02:00:05:00:00/40 tag 0 ncq 360448 out
May 11 14:46:31 server kernel: [6556958.688006] ata5.00: cmd 61/c8:10:cf:bc:21/03:00:05:00:00/40 tag 2 ncq 495616 out
May 11 14:46:31 server kernel: [6556958.688006] ata5.00: failed command: WRITE FPDMA QUEUED
May 11 14:46:31 server kernel: [6556958.688006] ata5.00: status: { DRDY }
May 11 14:46:31 server kernel: [6556958.688006] ata5: hard resetting link
May 11 14:46:31 server kernel: [6556958.688006]          res 40/00:00:57:c3:21/00:00:05:00:00/40 Emask 0x10 (ATA bus error)
May 11 14:46:37 server kernel: [6556964.052283] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May 11 14:46:37 server kernel: [6556964.052310] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
May 11 14:46:37 server kernel: [6556964.232633] ata6.00: configured for UDMA/133
May 11 14:46:37 server kernel: [6556964.232830] ata5.00: configured for UDMA/133

May 11 15:11:36 server kernel: [6558463.110687] ata6.00: exception Emask 0x0 SAct 0xf SErr 0x0 action 0x0
May 11 15:11:36 server kernel: [6558463.110730] ata6.00: irq_stat 0x40000008
May 11 15:11:36 server kernel: [6558463.110765] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:11:36 server kernel: [6558463.110805] ata6.00: cmd 60/00:10:ff:b7:21/01:00:05:00:00/40 tag 2 ncq 131072 in
May 11 15:11:36 server kernel: [6558463.110806]          res 41/40:00:7d:b8:21/00:01:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:11:36 server kernel: [6558463.110921] ata6.00: status: { DRDY ERR }
May 11 15:11:36 server kernel: [6558463.110954] ata6.00: error: { UNC }
May 11 15:11:36 server kernel: [6558463.133811] ata6.00: configured for UDMA/133
May 11 15:11:40 server kernel: [6558466.869250] ata6.00: exception Emask 0x0 SAct 0x2 SErr 0x0 action 0x0
May 11 15:11:40 server kernel: [6558466.869293] ata6.00: irq_stat 0x40000008
May 11 15:11:40 server kernel: [6558466.869328] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:11:40 server kernel: [6558466.869368] ata6.00: cmd 60/00:08:ff:b7:21/01:00:05:00:00/40 tag 1 ncq 131072 in
May 11 15:11:40 server kernel: [6558466.869369]          res 41/40:00:7d:b8:21/00:01:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:11:40 server kernel: [6558466.869485] ata6.00: status: { DRDY ERR }
May 11 15:11:40 server kernel: [6558466.869517] ata6.00: error: { UNC }
May 11 15:11:40 server kernel: [6558466.979340] ata6.00: configured for UDMA/133
May 11 15:11:43 server kernel: [6558470.768038] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:11:43 server kernel: [6558470.768081] ata6.00: irq_stat 0x40000008
May 11 15:11:43 server kernel: [6558470.768115] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:11:43 server kernel: [6558470.768154] ata6.00: cmd 60/00:00:ff:b7:21/01:00:05:00:00/40 tag 0 ncq 131072 in
May 11 15:11:43 server kernel: [6558470.768155]          res 41/40:00:7d:b8:21/00:01:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:11:43 server kernel: [6558470.768268] ata6.00: status: { DRDY ERR }
May 11 15:11:43 server kernel: [6558470.768300] ata6.00: error: { UNC }
May 11 15:11:44 server kernel: [6558470.835835] ata6.00: configured for UDMA/133
May 11 15:11:47 server kernel: [6558473.838943] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:11:47 server kernel: [6558473.838985] ata6.00: irq_stat 0x40000008
May 11 15:11:47 server kernel: [6558473.839019] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:11:47 server kernel: [6558473.839058] ata6.00: cmd 60/00:00:ff:b7:21/01:00:05:00:00/40 tag 0 ncq 131072 in
May 11 15:11:47 server kernel: [6558473.839059]          res 41/40:00:7d:b8:21/00:01:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:11:47 server kernel: [6558473.839172] ata6.00: status: { DRDY ERR }
May 11 15:11:47 server kernel: [6558473.839204] ata6.00: error: { UNC }
May 11 15:11:47 server kernel: [6558473.862020] ata6.00: configured for UDMA/133
May 11 15:11:50 server kernel: [6558476.829157] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:11:50 server kernel: [6558476.829200] ata6.00: irq_stat 0x40000008
May 11 15:11:50 server kernel: [6558476.829234] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:11:50 server kernel: [6558476.829273] ata6.00: cmd 60/00:00:ff:b7:21/01:00:05:00:00/40 tag 0 ncq 131072 in
May 11 15:11:50 server kernel: [6558476.829274]          res 41/40:00:7d:b8:21/00:01:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:11:50 server kernel: [6558476.829387] ata6.00: status: { DRDY ERR }
May 11 15:11:50 server kernel: [6558476.829419] ata6.00: error: { UNC }
May 11 15:11:50 server kernel: [6558476.852291] ata6.00: configured for UDMA/133
May 11 15:11:53 server kernel: [6558480.594038] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:11:53 server kernel: [6558480.594080] ata6.00: irq_stat 0x40000008
May 11 15:11:53 server kernel: [6558480.594114] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:11:53 server kernel: [6558480.594153] ata6.00: cmd 60/00:00:ff:b7:21/01:00:05:00:00/40 tag 0 ncq 131072 in
May 11 15:11:53 server kernel: [6558480.594155]          res 41/40:00:7d:b8:21/00:01:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:11:53 server kernel: [6558480.594268] ata6.00: status: { DRDY ERR }
May 11 15:11:53 server kernel: [6558480.594300] ata6.00: error: { UNC }
May 11 15:11:53 server kernel: [6558480.617179] ata6.00: configured for UDMA/133
May 11 15:11:53 server kernel: [6558480.617242] sd 5:0:0:0: [sdf] Unhandled sense code
May 11 15:11:53 server kernel: [6558480.617245] sd 5:0:0:0: [sdf] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 11 15:11:53 server kernel: [6558480.617250] sd 5:0:0:0: [sdf] Sense Key : Medium Error [current] [descriptor]
May 11 15:11:53 server kernel: [6558480.617258] Descriptor sense data with sense descriptors (in hex):
May 11 15:11:53 server kernel: [6558480.617262]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
May 11 15:11:53 server kernel: [6558480.617281]         05 21 b8 7d
May 11 15:11:53 server kernel: [6558480.617289] sd 5:0:0:0: [sdf] Add. Sense: Unrecovered read error - auto reallocate failed
May 11 15:11:53 server kernel: [6558480.617296] sd 5:0:0:0: [sdf] CDB: Read(10): 28 00 05 21 b7 ff 00 01 00 00
May 11 15:11:53 server kernel: [6558480.617314] end_request: I/O error, dev sdf, sector 86095997
May 11 15:11:53 server kernel: [6558480.617352] raid1: sdf1: rescheduling sector 86095896
May 11 15:11:53 server kernel: [6558480.617394] raid1: sdf1: rescheduling sector 86095984
May 11 15:11:57 server kernel: [6558484.583784] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:11:57 server kernel: [6558484.583827] ata6.00: irq_stat 0x40000008
May 11 15:11:57 server kernel: [6558484.583861] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:11:57 server kernel: [6558484.583899] ata6.00: cmd 60/08:00:77:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:11:57 server kernel: [6558484.583901]          res 41/40:08:7d:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:11:57 server kernel: [6558484.584014] ata6.00: status: { DRDY ERR }
May 11 15:11:57 server kernel: [6558484.584046] ata6.00: error: { UNC }
May 11 15:11:57 server kernel: [6558484.606881] ata6.00: configured for UDMA/133
May 11 15:12:00 server kernel: [6558487.565694] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:00 server kernel: [6558487.565737] ata6.00: irq_stat 0x40000008
May 11 15:12:00 server kernel: [6558487.565771] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:12:00 server kernel: [6558487.565810] ata6.00: cmd 60/08:00:77:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:00 server kernel: [6558487.565811]          res 41/40:08:7d:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:00 server kernel: [6558487.565924] ata6.00: status: { DRDY ERR }
May 11 15:12:00 server kernel: [6558487.565956] ata6.00: error: { UNC }
May 11 15:12:00 server kernel: [6558487.588830] ata6.00: configured for UDMA/133
May 11 15:12:03 server kernel: [6558490.564283] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:03 server kernel: [6558490.564326] ata6.00: irq_stat 0x40000008
May 11 15:12:03 server kernel: [6558490.564360] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:12:03 server kernel: [6558490.564399] ata6.00: cmd 60/08:00:77:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:03 server kernel: [6558490.564401]          res 41/40:08:7d:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:03 server kernel: [6558490.564514] ata6.00: status: { DRDY ERR }
May 11 15:12:03 server kernel: [6558490.564546] ata6.00: error: { UNC }
May 11 15:12:03 server kernel: [6558490.587407] ata6.00: configured for UDMA/133
May 11 15:12:07 server kernel: [6558494.404134] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:07 server kernel: [6558494.404177] ata6.00: irq_stat 0x40000008
May 11 15:12:07 server kernel: [6558494.404211] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:12:07 server kernel: [6558494.404249] ata6.00: cmd 60/08:00:77:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:07 server kernel: [6558494.404251]          res 41/40:08:7d:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:07 server kernel: [6558494.404364] ata6.00: status: { DRDY ERR }
May 11 15:12:07 server kernel: [6558494.404396] ata6.00: error: { UNC }
May 11 15:12:07 server kernel: [6558494.427221] ata6.00: configured for UDMA/133
May 11 15:12:11 server kernel: [6558498.152336] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:11 server kernel: [6558498.152378] ata6.00: irq_stat 0x40000008
May 11 15:12:11 server kernel: [6558498.152412] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:12:11 server kernel: [6558498.152451] ata6.00: cmd 60/08:00:77:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:11 server kernel: [6558498.152453]          res 41/40:08:7d:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:11 server kernel: [6558498.152565] ata6.00: status: { DRDY ERR }
May 11 15:12:11 server kernel: [6558498.152598] ata6.00: error: { UNC }
May 11 15:12:11 server kernel: [6558498.175469] ata6.00: configured for UDMA/133
May 11 15:12:14 server kernel: [6558501.159235] ata6.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:14 server kernel: [6558501.159278] ata6.00: irq_stat 0x40000008
May 11 15:12:14 server kernel: [6558501.159311] ata6.00: failed command: READ FPDMA QUEUED
May 11 15:12:14 server kernel: [6558501.159350] ata6.00: cmd 60/08:00:77:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:14 server kernel: [6558501.159352]          res 41/40:08:7d:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:14 server kernel: [6558501.159464] ata6.00: status: { DRDY ERR }
May 11 15:12:14 server kernel: [6558501.159497] ata6.00: error: { UNC }
May 11 15:12:14 server kernel: [6558501.182364] ata6.00: configured for UDMA/133
May 11 15:12:14 server kernel: [6558501.182378] sd 5:0:0:0: [sdf] Unhandled sense code
May 11 15:12:14 server kernel: [6558501.182381] sd 5:0:0:0: [sdf] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 11 15:12:14 server kernel: [6558501.182386] sd 5:0:0:0: [sdf] Sense Key : Medium Error [current] [descriptor]
May 11 15:12:14 server kernel: [6558501.182394] Descriptor sense data with sense descriptors (in hex):
May 11 15:12:14 server kernel: [6558501.182398]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
May 11 15:12:14 server kernel: [6558501.182417]         05 21 b8 7d
May 11 15:12:14 server kernel: [6558501.182425] sd 5:0:0:0: [sdf] Add. Sense: Unrecovered read error - auto reallocate failed
May 11 15:12:14 server kernel: [6558501.182432] sd 5:0:0:0: [sdf] CDB: Read(10): 28 00 05 21 b8 77 00 00 08 00
May 11 15:12:14 server kernel: [6558501.182450] end_request: I/O error, dev sdf, sector 86095997
May 11 15:12:14 server kernel: [6558501.218079] raid1:md5: read error corrected (8 sectors at 86095928 on sdf1)
May 11 15:12:14 server kernel: [6558501.225122] raid1: sde1: redirecting sector 86095896 to another mirror
May 11 15:12:14 server kernel: [6558501.230327] raid1: sde1: redirecting sector 86095984 to another mirror
May 11 15:12:18 server kernel: [6558505.030334] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:18 server kernel: [6558505.030374] ata5.00: irq_stat 0x40000008
May 11 15:12:18 server kernel: [6558505.030407] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:18 server kernel: [6558505.030446] ata5.00: cmd 60/50:00:af:b8:21/00:00:05:00:00/40 tag 0 ncq 40960 in
May 11 15:12:18 server kernel: [6558505.030448]          res 41/40:50:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:18 server kernel: [6558505.030560] ata5.00: status: { DRDY ERR }
May 11 15:12:18 server kernel: [6558505.030593] ata5.00: error: { UNC }
May 11 15:12:18 server kernel: [6558505.053260] ata5.00: configured for UDMA/133
May 11 15:12:22 server kernel: [6558509.411546] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:22 server kernel: [6558509.411588] ata5.00: irq_stat 0x40000008
May 11 15:12:22 server kernel: [6558509.411623] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:22 server kernel: [6558509.411662] ata5.00: cmd 60/50:00:af:b8:21/00:00:05:00:00/40 tag 0 ncq 40960 in
May 11 15:12:22 server kernel: [6558509.411663]          res 41/40:50:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:22 server kernel: [6558509.411777] ata5.00: status: { DRDY ERR }
May 11 15:12:22 server kernel: [6558509.411809] ata5.00: error: { UNC }
May 11 15:12:22 server kernel: [6558509.434487] ata5.00: configured for UDMA/133
May 11 15:12:25 server kernel: [6558512.376822] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:25 server kernel: [6558512.376863] ata5.00: irq_stat 0x40000008
May 11 15:12:25 server kernel: [6558512.376897] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:25 server kernel: [6558512.376936] ata5.00: cmd 60/50:00:af:b8:21/00:00:05:00:00/40 tag 0 ncq 40960 in
May 11 15:12:25 server kernel: [6558512.376937]          res 41/40:50:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:25 server kernel: [6558512.380803] ata5.00: error: { UNC }
May 11 15:12:25 server kernel: [6558512.380803] ata5.00: status: { DRDY ERR }
May 11 15:12:25 server kernel: [6558512.399748] ata5.00: configured for UDMA/133
May 11 15:12:28 server kernel: [6558515.375376] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:28 server kernel: [6558515.375419] ata5.00: irq_stat 0x40000008
May 11 15:12:28 server kernel: [6558515.375453] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:28 server kernel: [6558515.375493] ata5.00: cmd 60/50:00:af:b8:21/00:00:05:00:00/40 tag 0 ncq 40960 in
May 11 15:12:28 server kernel: [6558515.375495]          res 41/40:50:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:28 server kernel: [6558515.375609] ata5.00: status: { DRDY ERR }
May 11 15:12:28 server kernel: [6558515.375642] ata5.00: error: { UNC }
May 11 15:12:28 server kernel: [6558515.398347] ata5.00: configured for UDMA/133
May 11 15:12:31 server kernel: [6558518.382289] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:31 server kernel: [6558518.382331] ata5.00: irq_stat 0x40000008
May 11 15:12:31 server kernel: [6558518.382366] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:31 server kernel: [6558518.382404] ata5.00: cmd 60/50:00:af:b8:21/00:00:05:00:00/40 tag 0 ncq 40960 in
May 11 15:12:31 server kernel: [6558518.382406]          res 41/40:50:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:31 server kernel: [6558518.382519] ata5.00: status: { DRDY ERR }
May 11 15:12:31 server kernel: [6558518.382551] ata5.00: error: { UNC }
May 11 15:12:31 server kernel: [6558518.405207] ata5.00: configured for UDMA/133
May 11 15:12:34 server kernel: [6558521.405841] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:34 server kernel: [6558521.405881] ata5.00: irq_stat 0x40000008
May 11 15:12:34 server kernel: [6558521.405915] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:34 server kernel: [6558521.405953] ata5.00: cmd 60/50:00:af:b8:21/00:00:05:00:00/40 tag 0 ncq 40960 in
May 11 15:12:34 server kernel: [6558521.405955]          res 41/40:50:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:34 server kernel: [6558521.406068] ata5.00: status: { DRDY ERR }
May 11 15:12:34 server kernel: [6558521.406100] ata5.00: error: { UNC }
May 11 15:12:34 server kernel: [6558521.428797] ata5.00: configured for UDMA/133
May 11 15:12:34 server kernel: [6558521.428812] sd 4:0:0:0: [sde] Unhandled sense code
May 11 15:12:34 server kernel: [6558521.428815] sd 4:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 11 15:12:34 server kernel: [6558521.428820] sd 4:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor]
May 11 15:12:34 server kernel: [6558521.428828] Descriptor sense data with sense descriptors (in hex):
May 11 15:12:34 server kernel: [6558521.428832]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
May 11 15:12:34 server kernel: [6558521.428852]         05 21 b8 f0
May 11 15:12:34 server kernel: [6558521.428859] sd 4:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed
May 11 15:12:34 server kernel: [6558521.428866] sd 4:0:0:0: [sde] CDB: Read(10): 28 00 05 21 b8 af 00 00 50 00
May 11 15:12:34 server kernel: [6558521.428884] end_request: I/O error, dev sde, sector 86096112
May 11 15:12:34 server kernel: [6558521.428923] raid1: sde1: rescheduling sector 86095984
May 11 15:12:37 server kernel: [6558524.479410] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:37 server kernel: [6558524.479452] ata5.00: irq_stat 0x40000008
May 11 15:12:37 server kernel: [6558524.479486] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:37 server kernel: [6558524.479526] ata5.00: cmd 60/08:00:ef:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:37 server kernel: [6558524.479527]          res 41/40:08:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:37 server kernel: [6558524.479640] ata5.00: status: { DRDY ERR }
May 11 15:12:37 server kernel: [6558524.479672] ata5.00: error: { UNC }
May 11 15:12:37 server kernel: [6558524.501987] ata5.00: configured for UDMA/133
May 11 15:12:40 server kernel: [6558527.461286] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:40 server kernel: [6558527.461328] ata5.00: irq_stat 0x40000008
May 11 15:12:40 server kernel: [6558527.461362] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:40 server kernel: [6558527.461401] ata5.00: cmd 60/08:00:ef:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:40 server kernel: [6558527.461402]          res 41/40:08:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:40 server kernel: [6558527.461515] ata5.00: status: { DRDY ERR }
May 11 15:12:40 server kernel: [6558527.461547] ata5.00: error: { UNC }
May 11 15:12:40 server kernel: [6558527.483927] ata5.00: configured for UDMA/133
May 11 15:12:43 server kernel: [6558530.501479] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:43 server kernel: [6558530.501521] ata5.00: irq_stat 0x40000008
May 11 15:12:43 server kernel: [6558530.501555] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:43 server kernel: [6558530.501594] ata5.00: cmd 60/08:00:ef:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:43 server kernel: [6558530.501595]          res 41/40:08:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:43 server kernel: [6558530.501708] ata5.00: status: { DRDY ERR }
May 11 15:12:43 server kernel: [6558530.501740] ata5.00: error: { UNC }
May 11 15:12:43 server kernel: [6558530.524114] ata5.00: configured for UDMA/133
May 11 15:12:46 server kernel: [6558533.491741] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:46 server kernel: [6558533.491784] ata5.00: irq_stat 0x40000008
May 11 15:12:46 server kernel: [6558533.491818] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:46 server kernel: [6558533.491856] ata5.00: cmd 60/08:00:ef:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:46 server kernel: [6558533.491858]          res 41/40:08:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:46 server kernel: [6558533.491971] ata5.00: status: { DRDY ERR }
May 11 15:12:46 server kernel: [6558533.492004] ata5.00: error: { UNC }
May 11 15:12:46 server kernel: [6558533.514355] ata5.00: configured for UDMA/133
May 11 15:12:49 server kernel: [6558536.515272] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:49 server kernel: [6558536.515315] ata5.00: irq_stat 0x40000008
May 11 15:12:49 server kernel: [6558536.515349] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:49 server kernel: [6558536.515387] ata5.00: cmd 60/08:00:ef:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:49 server kernel: [6558536.515389]          res 41/40:08:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:49 server kernel: [6558536.515502] ata5.00: status: { DRDY ERR }
May 11 15:12:49 server kernel: [6558536.515534] ata5.00: error: { UNC }
May 11 15:12:49 server kernel: [6558536.537957] ata5.00: configured for UDMA/133
May 11 15:12:52 server kernel: [6558539.522192] ata5.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0
May 11 15:12:52 server kernel: [6558539.522235] ata5.00: irq_stat 0x40000008
May 11 15:12:52 server kernel: [6558539.522269] ata5.00: failed command: READ FPDMA QUEUED
May 11 15:12:52 server kernel: [6558539.522308] ata5.00: cmd 60/08:00:ef:b8:21/00:00:05:00:00/40 tag 0 ncq 4096 in
May 11 15:12:52 server kernel: [6558539.522309]          res 41/40:08:f0:b8:21/00:00:05:00:00/00 Emask 0x409 (media error) <F>
May 11 15:12:52 server kernel: [6558539.522422] ata5.00: status: { DRDY ERR }
May 11 15:12:52 server kernel: [6558539.522454] ata5.00: error: { UNC }
May 11 15:12:52 server kernel: [6558539.544836] ata5.00: configured for UDMA/133
May 11 15:12:52 server kernel: [6558539.544852] sd 4:0:0:0: [sde] Unhandled sense code
May 11 15:12:52 server kernel: [6558539.544855] sd 4:0:0:0: [sde] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 11 15:12:52 server kernel: [6558539.544860] sd 4:0:0:0: [sde] Sense Key : Medium Error [current] [descriptor]
May 11 15:12:52 server kernel: [6558539.544867] Descriptor sense data with sense descriptors (in hex):
May 11 15:12:52 server kernel: [6558539.544871]         72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
May 11 15:12:52 server kernel: [6558539.544891]         05 21 b8 f0
May 11 15:12:52 server kernel: [6558539.544899] sd 4:0:0:0: [sde] Add. Sense: Unrecovered read error - auto reallocate failed
May 11 15:12:52 server kernel: [6558539.544906] sd 4:0:0:0: [sde] CDB: Read(10): 28 00 05 21 b8 ef 00 00 08 00
May 11 15:12:52 server kernel: [6558539.544924] end_request: I/O error, dev sde, sector 86096112
May 11 15:12:52 server kernel: [6558539.545969] raid1:md5: read error corrected (8 sectors at 86096048 on sde1)
May 11 15:12:52 server kernel: [6558539.569732] raid1: sdf1: redirecting sector 86095984 to another mirror
May 11 15:22:49 server smartd[2606]: Device: /dev/sde [SAT], ATA error count increased from 0 to 12
May 11 15:22:49 server smartd[2606]: Device: /dev/sdf [SAT], ATA error count increased from 0 to 12
# smartctl -a /dev/sde
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda ES.2
Device Model:     ST3750330NS
Serial Number:    XXX
Firmware Version: SN05
User Capacity:    750,156,374,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon May 13 17:19:06 2013 CEST

==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207963

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      ( 242)	Self-test routine in progress...
					20% of test remaining.
Total time to complete Offline 
data collection: 		 ( 634) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 178) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   070   063   044    Pre-fail  Always       -       97476645
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       41
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x000f   076   060   030    Pre-fail  Always       -       44276420
  9 Power_On_Hours          0x0032   083   083   000    Old_age   Always       -       15361
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   037   020    Old_age   Always       -       41
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   088   088   000    Old_age   Always       -       12
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   085   085   000    Old_age   Always       -       15
190 Airflow_Temperature_Cel 0x0022   068   064   045    Old_age   Always       -       32 (Lifetime Min/Max 31/35)
194 Temperature_Celsius     0x0022   032   040   000    Old_age   Always       -       32 (0 18 0 0)
195 Hardware_ECC_Recovered  0x001a   036   026   000    Old_age   Always       -       97476645
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 12 occurred at disk power-on lifetime: 15311 hours (637 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 f0 b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ef b8 21 45 00      00:26:15.032  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:26:15.031  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:26:15.030  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:26:15.030  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:26:15.029  READ NATIVE MAX ADDRESS EXT

Error 11 occurred at disk power-on lifetime: 15311 hours (637 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 f0 b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ef b8 21 45 00      00:26:12.008  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:26:12.008  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:26:12.006  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:26:12.006  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:26:12.006  READ NATIVE MAX ADDRESS EXT

Error 10 occurred at disk power-on lifetime: 15311 hours (637 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 f0 b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ef b8 21 45 00      00:26:09.018  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:26:09.018  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:26:09.016  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:26:09.016  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:26:09.015  READ NATIVE MAX ADDRESS EXT

Error 9 occurred at disk power-on lifetime: 15311 hours (637 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 f0 b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ef b8 21 45 00      00:26:05.978  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:26:05.978  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:26:05.976  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:26:05.976  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:26:05.975  READ NATIVE MAX ADDRESS EXT

Error 8 occurred at disk power-on lifetime: 15311 hours (637 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 f0 b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 ef b8 21 45 00      00:26:02.996  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:26:02.996  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:26:02.994  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:26:02.994  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:26:02.993  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Self-test routine in progress 20%     15361         -
# 2  Extended offline    Completed without error       00%     15329         -
# 3  Extended offline    Completed without error       00%     15161         -
# 4  Extended offline    Completed without error       00%     14993         -
# 5  Extended offline    Completed without error       00%     14824         -
# 6  Extended offline    Completed without error       00%     14656         -
# 7  Extended offline    Completed without error       00%     14488         -
# 8  Extended offline    Completed without error       00%     14321         -
# 9  Extended offline    Completed without error       00%     14154         -
#10  Extended offline    Completed without error       00%     13986         -
#11  Extended offline    Completed without error       00%     13818         -
#12  Extended offline    Completed without error       00%     13650         -
#13  Extended offline    Completed without error       00%     13493         -
#14  Extended offline    Completed without error       00%     13346         -
#15  Extended offline    Completed without error       00%     13178         -
#16  Extended offline    Completed without error       00%     13010         -
#17  Extended offline    Completed without error       00%     12842         -
#18  Extended offline    Completed without error       00%     12674         -
#19  Extended offline    Completed without error       00%     12506         -
#20  Extended offline    Completed without error       00%     12338         -
#21  Extended offline    Completed without error       00%     12170         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
# smartctl -a /dev/sdf
smartctl 5.40 2010-07-12 r3124 [x86_64-unknown-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda ES.2
Device Model:     ST3750330NS
Serial Number:    XXX
Firmware Version: SN05
User Capacity:    750,156,374,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Mon May 13 17:35:05 2013 CEST

==> WARNING: There are known problems with these drives,
see the following Seagate web pages:
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931
http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207963

SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 642) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 ( 173) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   068   060   044    Pre-fail  Always       -       212763482
  3 Spin_Up_Time            0x0003   099   099   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   100   100   020    Old_age   Always       -       90
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   075   060   030    Pre-fail  Always       -       17302664910
  9 Power_On_Hours          0x0032   060   060   000    Old_age   Always       -       35569
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   037   020    Old_age   Always       -       90
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   088   088   000    Old_age   Always       -       12
188 Command_Timeout         0x0032   100   100   000    Old_age   Always       -       0
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   071   060   045    Old_age   Always       -       29 (Lifetime Min/Max 29/32)
194 Temperature_Celsius     0x0022   029   040   000    Old_age   Always       -       29 (0 19 0 0)
195 Hardware_ECC_Recovered  0x001a   040   027   000    Old_age   Always       -       212763482
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 12 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 12 occurred at disk power-on lifetime: 35519 hours (1479 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 7d b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 77 b8 21 45 00      00:25:36.652  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:25:36.652  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:25:36.650  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:25:36.650  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:25:36.649  READ NATIVE MAX ADDRESS EXT

Error 11 occurred at disk power-on lifetime: 35519 hours (1479 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 7d b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 77 b8 21 45 00      00:25:32.904  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:25:32.904  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:25:32.902  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:25:32.902  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:25:32.901  READ NATIVE MAX ADDRESS EXT

Error 10 occurred at disk power-on lifetime: 35519 hours (1479 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 7d b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 77 b8 21 45 00      00:25:29.064  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:25:29.064  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:25:29.062  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:25:29.062  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:25:29.061  READ NATIVE MAX ADDRESS EXT

Error 9 occurred at disk power-on lifetime: 35519 hours (1479 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 7d b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 77 b8 21 45 00      00:25:26.066  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:25:26.065  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:25:26.064  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:25:26.063  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:25:26.063  READ NATIVE MAX ADDRESS EXT

Error 8 occurred at disk power-on lifetime: 35519 hours (1479 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 00 7d b8 21 05

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 08 77 b8 21 45 00      00:25:23.084  READ FPDMA QUEUED
  27 00 00 00 00 00 e0 00      00:25:23.084  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 a0 00      00:25:23.082  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      00:25:23.081  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 e0 00      00:25:23.081  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     35537         -
# 2  Extended offline    Completed without error       00%     35369         -
# 3  Extended offline    Completed without error       00%     35201         -
# 4  Extended offline    Completed without error       00%     35032         -
# 5  Extended offline    Completed without error       00%     34864         -
# 6  Extended offline    Completed without error       00%     34696         -
# 7  Extended offline    Completed without error       00%     34529         -
# 8  Extended offline    Completed without error       00%     34362         -
# 9  Extended offline    Completed without error       00%     34194         -
#10  Extended offline    Completed without error       00%     34026         -
#11  Extended offline    Completed without error       00%     33858         -
#12  Extended offline    Completed without error       00%     33701         -
#13  Extended offline    Completed without error       00%     33554         -
#14  Extended offline    Completed without error       00%     33386         -
#15  Extended offline    Completed without error       00%     33218         -
#16  Extended offline    Completed without error       00%     33050         -
#17  Extended offline    Completed without error       00%     32882         -
#18  Extended offline    Completed without error       00%     32714         -
#19  Extended offline    Completed without error       00%     32546         -
#20  Extended offline    Completed without error       00%     32378         -
#21  Extended offline    Completed without error       00%     32210         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Nástroje: Začni sledovat (0) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

13.5.2013 18:10 ewew | skóre: 40 | blog: ewewov_blog
Rozbalit Rozbalit vše Re: Chybne disky, radic alebo kable?
Odpovědět | | Sbalit | Link | Blokovat | Admin

==> WARNING: There are known problems with these drives, see the following Seagate web pages: http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207931 http://seagate.custkb.com/seagate/crm/selfservice/search.jsp?DocId=207963

V smartctl je vypis o problemovosti daného disku. V prvom rade by si mal odzálohovať obsah diskov bez ohľadu na chybu.

Root v linuxe : "Root povedal, linux vykona."
13.5.2013 22:40 GeorgeWH | skóre: 42
Rozbalit Rozbalit vše Re: Chybne disky, radic alebo kable?
skusal si tie linky aj otvorit? asi nie... ocakavam skor rady od ludi, co s tym maju prakticku skusenost.
13.5.2013 23:20 ewew | skóre: 40 | blog: ewewov_blog
Rozbalit Rozbalit vše Re: Chybne disky, radic alebo kable?

Neskôr som zistil,že linky nefungujú. Vieš o tom, že chyba na jednom disku sa prejavi na druhom. RAID 1 je zrkadlenie. Existuje možnosť, že disky sú poškodené a pri ďalšom reštarte nemusia nabehnúť. Myslím, že je lepšie mať nejakú zálohu v prípade problému. Nevylučujem problém s doskou, radičom a káblami. Kľudne to môže byť náhodna chyba. Sú pre teba tie data cenné ?

Root v linuxe : "Root povedal, linux vykona."

Založit nové vláknoNahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.