Portál AbcLinuxu, 4. prosince 2025 07:47
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.5.0-23-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=======> ARGUMENT REQUIRED FOR OPTION: d
=======> VALID ARGUMENTS ARE: ata, scsi, sat[,N][+TYPE], usbcypress[,X], usbjmicron[,x][,N], usbsunplus, marvell, areca,N, 3ware,N, hpt,L/M/N, megaraid,N, cciss,N, auto, test <=======
Use smartctl -h to get a usage summary
ubuntu@ubuntu:~$ sudo smartctl /dev/sda
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.5.0-23-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
ATA device successfully opened
Use 'smartctl -a' (or '-x') to print SMART (and more) information
ubuntu@ubuntu:~$ sudo smartctl /dev/sda -x
smartctl 5.41 2011-06-09 r3365 [i686-linux-3.5.0-23-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Scorpio Blue Serial ATA (Adv. Format)
Device Model: WDC WD3200BPVT-22JJ5T0
Serial Number: WD-WX21E91TS134
LU WWN Device Id: 5 0014ee 601fc9b11
Firmware Version: 01.01A01
User Capacity: 320 072 933 376 bytes [320 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Thu Aug 8 04:40:18 2013 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 6900) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 71) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x7035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 6
3 Spin_Up_Time POS--K 145 135 021 - 1750
4 Start_Stop_Count -O--CK 097 097 000 - 3996
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
7 Seek_Error_Rate -OSR-K 200 200 000 - 0
9 Power_On_Hours -O--CK 099 099 000 - 1277
10 Spin_Retry_Count -O--CK 100 100 000 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 0
12 Power_Cycle_Count -O--CK 100 100 000 - 993
191 G-Sense_Error_Rate -O--CK 001 001 000 - 236
192 Power-Off_Retract_Count -O--CK 200 200 000 - 310
193 Load_Cycle_Count -O--CK 183 183 000 - 53326
194 Temperature_Celsius -O---K 102 097 000 - 41
196 Reallocated_Event_Count -O--CK 200 200 000 - 0
197 Current_Pending_Sector -O--CK 200 200 000 - 0
198 Offline_Uncorrectable ----CK 100 253 000 - 0
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
GP/S Log at address 0x00 has 1 sectors [Log Directory]
SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
SMART Log at address 0x06 has 1 sectors [SMART self-test log]
GP Log at address 0x07 has 1 sectors [Extended self-test log]
SMART Log at address 0x09 has 1 sectors [Selective self-test log]
GP Log at address 0x10 has 1 sectors [NCQ Command Error]
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
GP Log at address 0xc1 has 93 sectors [Device vendor specific log]
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
Device Error Count: 6
CR = Command Register
FEATR = Features Register
COUNT = Count (was: Sector Count) Register
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
LH = LBA High (was: Cylinder High) Register ] LBA
LM = LBA Mid (was: Cylinder Low) Register ] Register
LL = LBA Low (was: Sector Number) Register ]
DV = Device (was: Device/Head) Register
DC = Device Control Register
ER = Error register
ST = Status register
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 6 [5] occurred at disk power-on lifetime: 1275 hours (53 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 7f 00 00 17 2b 8b e1 e0 00 Error: UNC 127 sectors at LBA = 0x172b8be1 = 388729825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.698 READ DMA EXT
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.643 READ DMA EXT
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.594 READ DMA EXT
25 00 00 00 02 00 00 02 29 9b c6 e0 00 00:00:11.576 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 70 e0 00 00:00:11.575 READ DMA EXT
Error 5 [4] occurred at disk power-on lifetime: 1275 hours (53 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 7f 00 00 17 2b 8b e1 e0 00 Error: UNC 127 sectors at LBA = 0x172b8be1 = 388729825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.643 READ DMA EXT
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.594 READ DMA EXT
25 00 00 00 02 00 00 02 29 9b c6 e0 00 00:00:11.576 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 70 e0 00 00:00:11.575 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 60 e0 00 00:00:11.574 READ DMA EXT
Error 4 [3] occurred at disk power-on lifetime: 1275 hours (53 days + 3 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 7f 00 00 17 2b 8b e1 e0 00 Error: UNC 127 sectors at LBA = 0x172b8be1 = 388729825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.594 READ DMA EXT
25 00 00 00 02 00 00 02 29 9b c6 e0 00 00:00:11.576 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 70 e0 00 00:00:11.575 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 60 e0 00 00:00:11.574 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 50 e0 00 00:00:11.562 READ DMA EXT
Error 3 [2] occurred at disk power-on lifetime: 1274 hours (53 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 7f 00 00 17 2b 8b e1 e0 00 Error: UNC 127 sectors at LBA = 0x172b8be1 = 388729825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.843 READ DMA EXT
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.788 READ DMA EXT
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.740 READ DMA EXT
25 00 00 00 02 00 00 02 29 9b c6 e0 00 00:00:11.721 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 70 e0 00 00:00:11.721 READ DMA EXT
Error 2 [1] occurred at disk power-on lifetime: 1274 hours (53 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 7f 00 00 17 2b 8b e1 e0 00 Error: UNC 127 sectors at LBA = 0x172b8be1 = 388729825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.788 READ DMA EXT
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.740 READ DMA EXT
25 00 00 00 02 00 00 02 29 9b c6 e0 00 00:00:11.721 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 70 e0 00 00:00:11.721 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 60 e0 00 00:00:11.720 READ DMA EXT
Error 1 [0] occurred at disk power-on lifetime: 1274 hours (53 days + 2 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER -- ST COUNT LBA_48 LH LM LL DV DC
-- -- -- == -- == == == -- -- -- -- --
40 -- 51 00 7f 00 00 17 2b 8b e1 e0 00 Error: UNC 127 sectors at LBA = 0x172b8be1 = 388729825
Commands leading to the command that caused the error were:
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
-- == -- == -- == == == -- -- -- -- -- --------------- --------------------
25 00 00 00 7f 00 00 17 2b 8b e0 e0 00 00:00:11.740 READ DMA EXT
25 00 00 00 02 00 00 02 29 9b c6 e0 00 00:00:11.721 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 70 e0 00 00:00:11.721 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 60 e0 00 00:00:11.720 READ DMA EXT
25 00 00 00 10 00 00 01 c4 8d 50 e0 00 00:00:11.707 READ DMA EXT
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 258 (0x0102)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 41 Celsius
Power Cycle Min/Max Temperature: 41/41 Celsius
Lifetime Min/Max Temperature: 16/46 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 1 minute
Min/Max recommended Temperature: 0/60 Celsius
Min/Max Temperature Limit: -41/85 Celsius
Temperature History Size (Index): 128 (97)
Index Estimated Time Temperature Celsius
98 2013-08-08 02:33 ? -
99 2013-08-08 02:34 32 *************
100 2013-08-08 02:35 ? -
101 2013-08-08 02:36 32 *************
102 2013-08-08 02:37 ? -
103 2013-08-08 02:38 34 ***************
104 2013-08-08 02:39 ? -
105 2013-08-08 02:40 34 ***************
106 2013-08-08 02:41 ? -
107 2013-08-08 02:42 35 ****************
108 2013-08-08 02:43 ? -
109 2013-08-08 02:44 35 ****************
110 2013-08-08 02:45 ? -
111 2013-08-08 02:46 35 ****************
112 2013-08-08 02:47 ? -
113 2013-08-08 02:48 36 *****************
114 2013-08-08 02:49 ? -
115 2013-08-08 02:50 36 *****************
116 2013-08-08 02:51 ? -
117 2013-08-08 02:52 36 *****************
118 2013-08-08 02:53 ? -
119 2013-08-08 02:54 36 *****************
120 2013-08-08 02:55 ? -
121 2013-08-08 02:56 36 *****************
122 2013-08-08 02:57 ? -
123 2013-08-08 02:58 36 *****************
124 2013-08-08 02:59 ? -
125 2013-08-08 03:00 36 *****************
126 2013-08-08 03:01 ? -
127 2013-08-08 03:02 36 *****************
0 2013-08-08 03:03 ? -
1 2013-08-08 03:04 36 *****************
2 2013-08-08 03:05 ? -
3 2013-08-08 03:06 36 *****************
4 2013-08-08 03:07 ? -
5 2013-08-08 03:08 36 *****************
6 2013-08-08 03:09 ? -
7 2013-08-08 03:10 36 *****************
8 2013-08-08 03:11 ? -
9 2013-08-08 03:12 36 *****************
10 2013-08-08 03:13 ? -
11 2013-08-08 03:14 40 *********************
12 2013-08-08 03:15 ? -
13 2013-08-08 03:16 40 *********************
14 2013-08-08 03:17 ? -
15 2013-08-08 03:18 41 **********************
16 2013-08-08 03:19 ? -
17 2013-08-08 03:20 41 **********************
18 2013-08-08 03:21 ? -
19 2013-08-08 03:22 41 **********************
20 2013-08-08 03:23 ? -
21 2013-08-08 03:24 41 **********************
22 2013-08-08 03:25 ? -
23 2013-08-08 03:26 40 *********************
24 2013-08-08 03:27 ? -
25 2013-08-08 03:28 40 *********************
26 2013-08-08 03:29 ? -
27 2013-08-08 03:30 40 *********************
28 2013-08-08 03:31 ? -
29 2013-08-08 03:32 40 *********************
30 2013-08-08 03:33 ? -
31 2013-08-08 03:34 40 *********************
32 2013-08-08 03:35 ? -
33 2013-08-08 03:36 40 *********************
34 2013-08-08 03:37 ? -
35 2013-08-08 03:38 41 **********************
36 2013-08-08 03:39 ? -
37 2013-08-08 03:40 41 **********************
38 2013-08-08 03:41 ? -
39 2013-08-08 03:42 41 **********************
40 2013-08-08 03:43 ? -
41 2013-08-08 03:44 41 **********************
42 2013-08-08 03:45 ? -
43 2013-08-08 03:46 41 **********************
44 2013-08-08 03:47 ? -
45 2013-08-08 03:48 41 **********************
46 2013-08-08 03:49 ? -
47 2013-08-08 03:50 41 **********************
48 2013-08-08 03:51 ? -
49 2013-08-08 03:52 41 **********************
50 2013-08-08 03:53 ? -
51 2013-08-08 03:54 41 **********************
52 2013-08-08 03:55 ? -
53 2013-08-08 03:56 40 *********************
54 2013-08-08 03:57 ? -
55 2013-08-08 03:58 40 *********************
56 2013-08-08 03:59 ? -
57 2013-08-08 04:00 39 ********************
58 2013-08-08 04:01 ? -
59 2013-08-08 04:02 39 ********************
60 2013-08-08 04:03 ? -
61 2013-08-08 04:04 40 *********************
62 2013-08-08 04:05 ? -
63 2013-08-08 04:06 40 *********************
64 2013-08-08 04:07 ? -
65 2013-08-08 04:08 41 **********************
66 2013-08-08 04:09 ? -
67 2013-08-08 04:10 41 **********************
68 2013-08-08 04:11 ? -
69 2013-08-08 04:12 41 **********************
70 2013-08-08 04:13 ? -
71 2013-08-08 04:14 41 **********************
72 2013-08-08 04:15 ? -
73 2013-08-08 04:16 41 **********************
74 2013-08-08 04:17 ? -
75 2013-08-08 04:18 41 **********************
76 2013-08-08 04:19 ? -
77 2013-08-08 04:20 41 **********************
78 2013-08-08 04:21 ? -
79 2013-08-08 04:22 41 **********************
80 2013-08-08 04:23 ? -
81 2013-08-08 04:24 40 *********************
82 2013-08-08 04:25 ? -
83 2013-08-08 04:26 40 *********************
84 2013-08-08 04:27 ? -
85 2013-08-08 04:28 40 *********************
86 2013-08-08 04:29 ? -
87 2013-08-08 04:30 40 *********************
88 2013-08-08 04:31 ? -
89 2013-08-08 04:32 40 *********************
90 2013-08-08 04:33 ? -
91 2013-08-08 04:34 40 *********************
92 2013-08-08 04:35 ? -
93 2013-08-08 04:36 40 *********************
94 2013-08-08 04:37 ? -
95 2013-08-08 04:38 41 **********************
96 2013-08-08 04:39 ? -
97 2013-08-08 04:40 41 **********************
Warning: device does not support SCT Error Recovery Control command
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x8000 4 11 Vendor specific
Bad blocks mi vypsal doslova cely disk...
Neni mozne ze se to da spravit?
Nebo je dizkratkazkratkask uz uplne v haji a mam koupit novy
Diky Kuba
Poslední 3 toky jsou WD disky totální šmejdy , rychle vyměň ty co máš za jinou značku !
Nemám co k tomu dodat , snad jen že za tento rok mám 15ks v seznamu RMA na https://westerndigital.secure.force.com a vždy vyreklamovaný disk také po vcelku krátkém čase zase obsahuje vadné sektory a situace se opakuje. Poslední kvalitní WD HDD mám z řady IDE 400Gb a tam ještě mohu hovořit o kvalitě. Nevím zda-li je to technologií nebo šmejdem materiálem ale prostě rychle množící se vadné sektory na HDD které leží v CASE bez otřesů vidím pouze u WD.
Neříkám že Seagate nemá vadné sektory ale za rok 1 sektor u Seagate a za 14 dní 2 sektory u WD je docela rozdíl.
Takže to není TROLLení ale názor že WD je už jen nápis ale materiál není WD.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.