Dotaz: kompilace ovladace usb dvb-t make problem

[misak]

Dobry den, chtel bych se zeptat, zda mi nekdo neporadi. Kdyz chci zkopilovat ovladac pro usb dvb-t tunner, tak mi prikaz sudo make vypise toto:

make -C /lib/modules/3.10.24/source O=/lib/modules/3.10.24/build SUBDIRS=`pwd` modules make[1]: Entering directory `/lib/modules/3.10.24/source' make[1]: *** No rule to make target `modules'. Stop. make[1]: Leaving directory `/lib/modules/3.10.24/source' make: *** [default] Error 2

nejak nevim co s tim. Muze mi nekdo pomoci? Hledal jsem, ale neuspesne.

Linux raspbmc 3.10.24 #2 PREEMPT Mon Dec 23 05:18:12 UTC 2013 armv6l GNU/Linux

Dekuji

Odpovědi

[2X4B-523P]

moc málo informací, IMHO jediné, co se na to dá napsat je, že na make není potřeba sudo...

[misak]

vim ze staci jen make. Jake informace by pomohly?

[2X4B-523P]

třeba co je to za hw a odkud je ovladač, může tam být i chyba v makefile, nebo můžou chybět hlavičkové soubory jádra...

[misak]

Příloha:

• dpkg-l.txt (64067 bytů)

jasne, takze. Jedná se o AVerTV Volar HD Nano http://www.avermedia.eu/avertv/cz/Product/ProductDetail.aspx?Id=449 Driver jsem stáhl od vyrobce zde: http://www.avermedia.eu/avertv/cz/Upload/Download/a867_drv_v1.0.29.tar.bz2 Firmware do /lib/firmware jsem stahl zde: http://xgazza.altervista.org/Linux/DVB/dvb-usb-af9035-02.fw tim to ale nebude...

Kernel je 3.10.24, v repository pro nejk nebyli hlavicky, tam byly jen linux-headers-3.10-3. Zkousel jsem to i s nima. Pak jsem rucne jsem doinstalvoal i linux-headers-3.10.24-031024 "linux-headers-3.10.24-031024_3.10.24-031024.201312120235_all.deb" odsud kernel.ubuntu.com/~kernel-ppa/mainline/v3.10.24-saucy/linux-headers-3.10.24-031024_3.10.24-031024.201312120235_all.deb

Prikladam vypis baliku dpkg -l v priloze

Diky za rady

[2X4B-523P]

co brání v použití distribučního jádra? co je to vlastně za distro, raspbian?

[2X4B-523P]

raspbmc, ale to by se nemělo tolik lišit, co se jádra a hlaviček týče

[misak]

PRETTY_NAME="Raspbian GNU/Linux 7 (wheezy)" NAME="Raspbian GNU/Linux" VERSION_ID="7" VERSION="7 (wheezy)" ID=raspbian ID_LIKE=debian

trochu nechápu otázku: co brání v použití distribučního jádra? je tam jádro originální co bylo v distribuci.

Balíky budou asi stejný. Repository jsou: http://archive.raspbian.org/raspbian wheezy

[2X4B-523P]

tam se to asi bude muset udělat jako v odkazu pro tu wifi

https://blog.poettner.de/2012/08/22/how-to-compile-rtl8192cu-ko-for-raspberry-pi-running-raspian/

[mhepp]

Tam může být ten problém.

Jádro a jeho hlavičkové soubory jsou nedělitelný pár. To, že se balík balík jemnuje jinak, než je verze jádra, není na skodu. Takže potřebuješ balík linux-headers, který je do páru k použitému linux-image balíku. Správnost můžeš zkontrolovat tak, že se podíváš do /lib/modules/`uname -r`/ a pokud v tomto adresáři máš správné symlinky build a source, tak máš správné hlavičkové soubory.

Dále, pokud se podíváš pořádně na tu chybu, tak to přesně hlásí v čem je problém:

*** No rule to make target `modules'.

Ta říká, že úloha modules není definována v Makefile. Snažíš se kompilovat to jinak, než autoři zamýšleli.

Takže napřed zkus make bez jakýchkoliv parametrů, tak, jak se píše v souboru Releasenotes.txt, který je součástí těch zdrojáků.

[misak]

kernel je 3.10.24, kernel-headers v tero verzi v repository neni. Proto jsem stahl: odsud kernel.ubuntu.com/~kernel-ppa/mainline/v3.10.24-saucy/linux-headers-3.10.24-031024_3.10.24-031024.201312120235_all.deb zkusim jej jeste prejmenovat adresar nainstalovaneho baliku linux-headers-3.10.24-031024 na linux-headers-3.10.24

v Releasenotes.txt maji samotne make a pak dalsi krok sudo make install ja jsem daval jen make . To prave nezbehlo. Az budu doma vecer, tak kouknu na ty kernel-headers Jinak diky za pomoc :)

[mhepp]

Co jsem se dival,tak rpi ma v repozitari balik linux-headers-3.10-3,ktery by mel resit hlavicky aktualniho jadra.

Koukl ses do /lib/modules/$VERZE/,jestli tam je symlink source a build?

[misak]

tak jsem vse udelal nacisto. balik linux-headers-3.10-3 mam nainstalovany mam nainstalovany i linux-source-3.10 v /lib/modules/3.10.24/ je adresar build a kernel jine adresare ani symlinky tam defaultne nejsou.

vytvoril jsem adresar /lib/modules/3.10.24/source/ a do nej udelal symlink z /usr/src/linux-source-3.10 nyni kdyz zadam make, tak vypise: Missing files that required to build driver: /lib/modules/3.10.24/source/drivers/media/dvb/dvb-usb/dvb-usb-common.h dvb-usb/dvb-usb.h dvb-usb/dvb-usb-ids.h dvb-core/dvb_frontend.h dvb-core/dvbdev.h dvb-core/dmxdev.h dvb-core/dvb_demux.h dvb-core/dvb_net.h dvb-core/demux.h dvb-core/dvb_ringbuffer.h frontends/dvb-pll.h Try to get kernel source closest to 3.10.24 from www.kernel.org and then copy to /lib/modules/3.10.24/source/drivers/media/dvb

dodelam symlinky, protoze umisteni pozadovanych souboru se obcas lisi.

dam make a to mi uz vypise toto:

make -C /lib/modules/3.10.24/source O=/lib/modules/3.10.24/build SUBDIRS=`pwd` modules make[1]: Entering directory `/lib/modules/3.10.24/source'

ERROR: Kernel configuration is invalid. include/generated/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it.

WARNING: Symbol version dump /lib/modules/3.10.24/build/Module.symvers is missing; modules will have no dependencies and modversions.

CC [M] /home/pi/download/a867_drv_v1.0.29/af903x-core.o In file included from command-line:0:0: /lib/modules/3.10.24/source/include/linux/kconfig.h:4:32: fatal error: generated/autoconf.h: No such file or directory compilation terminated. make[3]: *** [/home/pi/download/a867_drv_v1.0.29/af903x-core.o] Error 1 make[2]: *** [_module_/home/pi/download/a867_drv_v1.0.29] Error 2 make[1]: *** [sub-make] Error 2 make[1]: Leaving directory `/lib/modules/3.10.24/source' make: *** [default] Error 2

jediny soubor autoconf.h ktery najdu je /usr/src/linux-source-3.10/drivers/net/wireless/rtl8192cu/include/autoconf.h soubor auto.conf nenajdu na file systemu vubec.

[misak]

jeste doplnim ze v adresari /lib/modules/3.10.24/build/ je pouze include a to je symlink do /usr/include

[misak]

doinstaloval jsem balik linux-headers-3.10-3-rpi a pak jsem uz nasel soubor /usr/src/linux-headers-3.10-3-rpi/include/generated/autoconf.h dodelal jsem symlink sudo ln -s /usr/src/linux-headers-3.10-3-rpi/Module.symvers /lib/modules/3.10.24/build/

pokud dam make, tak to vypise:

make -C /lib/modules/3.10.24/source O=/lib/modules/3.10.24/build SUBDIRS=`pwd` modules make[1]: Entering directory `/lib/modules/3.10.24/source'

ERROR: Kernel configuration is invalid. include/generated/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it.

CC [M] /home/pi/download/a867_drv_v1.0.29/af903x-core.o In file included from command-line:0:0: /lib/modules/3.10.24/source/include/linux/kconfig.h:4:32: fatal error: generated/autoconf.h: No such file or directory compilation terminated. make[3]: *** [/home/pi/download/a867_drv_v1.0.29/af903x-core.o] Error 1 make[2]: *** [_module_/home/pi/download/a867_drv_v1.0.29] Error 2 make[1]: *** [sub-make] Error 2 make[1]: Leaving directory `/lib/modules/3.10.24/source' make: *** [default] Error 2

soubor include/generated/autoconf.h jsem nasel zde: /usr/src/linux-headers-3.10-3-rpi/include/generated/autoconf.h jen nevim kam udelat symlink. jestli: do: /lib/modules/3.10.24/build/include/generated/ /lib/modules/3.10.24/source/include/generated/ nebo jinam

at udelam symlink tam ci tam, dalsi make vypada takto:

make -C /lib/modules/3.10.24/source O=/lib/modules/3.10.24/build SUBDIRS=`pwd` modules make[1]: Entering directory `/lib/modules/3.10.24/source'

ERROR: Kernel configuration is invalid. include/generated/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it.

CC [M] /home/pi/download/a867_drv_v1.0.29/af903x-core.o In file included from /lib/modules/3.10.24/source/include/linux/irqflags.h:15:0, from /lib/modules/3.10.24/source/arch/arm/include/asm/bitops.h:27, from /lib/modules/3.10.24/source/include/linux/bitops.h:22, from /lib/modules/3.10.24/source/include/linux/kernel.h:10, from /home/pi/download/a867_drv_v1.0.29/af903x.h:6, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/irqflags.h:11:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/include/linux/bitops.h:22:0, from /lib/modules/3.10.24/source/include/linux/kernel.h:10, from /home/pi/download/a867_drv_v1.0.29/af903x.h:6, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/bitops.h:217:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/arch/arm/include/asm/swab.h:18:0, from /lib/modules/3.10.24/source/include/uapi/linux/swab.h:6, from /lib/modules/3.10.24/source/include/linux/swab.h:4, from /lib/modules/3.10.24/source/include/uapi/linux/byteorder/little_endian.h:12, from /lib/modules/3.10.24/source/include/linux/byteorder/little_endian.h:4, from include/asm/byteorder.h:21, from /lib/modules/3.10.24/source/include/asm-generic/bitops/le.h:5, from /lib/modules/3.10.24/source/arch/arm/include/asm/bitops.h:308, from /lib/modules/3.10.24/source/include/linux/bitops.h:22, from /lib/modules/3.10.24/source/include/linux/kernel.h:10, from /home/pi/download/a867_drv_v1.0.29/af903x.h:6, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/uapi/asm/swab.h:26:29: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/include/uapi/linux/swab.h:6:0, from /lib/modules/3.10.24/source/include/linux/swab.h:4, from /lib/modules/3.10.24/source/include/uapi/linux/byteorder/little_endian.h:12, from /lib/modules/3.10.24/source/include/linux/byteorder/little_endian.h:4, from include/asm/byteorder.h:21, from /lib/modules/3.10.24/source/include/asm-generic/bitops/le.h:5, from /lib/modules/3.10.24/source/arch/arm/include/asm/bitops.h:308, from /lib/modules/3.10.24/source/include/linux/bitops.h:22, from /lib/modules/3.10.24/source/include/linux/kernel.h:10, from /home/pi/download/a867_drv_v1.0.29/af903x.h:6, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/swab.h:20:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/include/uapi/linux/kernel.h:4:0, from /lib/modules/3.10.24/source/include/linux/kernel.h:16, from /home/pi/download/a867_drv_v1.0.29/af903x.h:6, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: include/linux/sysinfo.h:8:2: error: unknown type name '__kernel_long_t' include/linux/sysinfo.h:9:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:10:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:11:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:12:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:13:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:14:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:15:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:18:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:19:2: error: unknown type name '__kernel_ulong_t' include/linux/sysinfo.h:21:22: error: '__kernel_ulong_t' undeclared here (not in a function) In file included from /lib/modules/3.10.24/source/arch/arm/include/asm/thread_info.h:16:0, from /lib/modules/3.10.24/source/include/linux/thread_info.h:54, from /lib/modules/3.10.24/source/include/linux/preempt.h:9, from /lib/modules/3.10.24/source/include/linux/spinlock.h:50, from /lib/modules/3.10.24/source/include/linux/mmzone.h:7, from /lib/modules/3.10.24/source/include/linux/gfp.h:4, from /lib/modules/3.10.24/source/include/linux/slab.h:12, from /home/pi/download/a867_drv_v1.0.29/af903x.h:9, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/fpstate.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/arch/arm/include/asm/domain.h:14:0, from /lib/modules/3.10.24/source/arch/arm/include/asm/thread_info.h:28, from /lib/modules/3.10.24/source/include/linux/thread_info.h:54, from /lib/modules/3.10.24/source/include/linux/preempt.h:9, from /lib/modules/3.10.24/source/include/linux/spinlock.h:50, from /lib/modules/3.10.24/source/include/linux/mmzone.h:7, from /lib/modules/3.10.24/source/include/linux/gfp.h:4, from /lib/modules/3.10.24/source/include/linux/slab.h:12, from /home/pi/download/a867_drv_v1.0.29/af903x.h:9, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/barrier.h:9:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /lib/modules/3.10.24/source/arch/arm/include/asm/barrier.h:10:3: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /lib/modules/3.10.24/source/arch/arm/include/asm/barrier.h:16:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /lib/modules/3.10.24/source/arch/arm/include/asm/barrier.h:20:35: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/include/linux/spinlock_up.h:8:0, from /lib/modules/3.10.24/source/include/linux/spinlock.h:89, from /lib/modules/3.10.24/source/include/linux/mmzone.h:7, from /lib/modules/3.10.24/source/include/linux/gfp.h:4, from /lib/modules/3.10.24/source/include/linux/slab.h:12, from /home/pi/download/a867_drv_v1.0.29/af903x.h:9, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/processor.h:78:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /lib/modules/3.10.24/source/arch/arm/include/asm/processor.h:93:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/arch/arm/include/asm/atomic.h:18:0, from /lib/modules/3.10.24/source/include/linux/atomic.h:4, from /lib/modules/3.10.24/source/include/linux/spinlock.h:392, from /lib/modules/3.10.24/source/include/linux/mmzone.h:7, from /lib/modules/3.10.24/source/include/linux/gfp.h:4, from /lib/modules/3.10.24/source/include/linux/slab.h:12, from /home/pi/download/a867_drv_v1.0.29/af903x.h:9, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/cmpxchg.h: In function '__xchg': /lib/modules/3.10.24/source/arch/arm/include/asm/cmpxchg.h:33:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] /lib/modules/3.10.24/source/arch/arm/include/asm/cmpxchg.h:40:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/arch/arm/include/asm/atomic.h:18:0, from /lib/modules/3.10.24/source/include/linux/atomic.h:4, from /lib/modules/3.10.24/source/include/linux/spinlock.h:392, from /lib/modules/3.10.24/source/include/linux/mmzone.h:7, from /lib/modules/3.10.24/source/include/linux/gfp.h:4, from /lib/modules/3.10.24/source/include/linux/slab.h:12, from /home/pi/download/a867_drv_v1.0.29/af903x.h:9, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/cmpxchg.h: At top level: /lib/modules/3.10.24/source/arch/arm/include/asm/cmpxchg.h:108:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/include/linux/atomic.h:4:0, from /lib/modules/3.10.24/source/include/linux/spinlock.h:392, from /lib/modules/3.10.24/source/include/linux/mmzone.h:7, from /lib/modules/3.10.24/source/include/linux/gfp.h:4, from /lib/modules/3.10.24/source/include/linux/slab.h:12, from /home/pi/download/a867_drv_v1.0.29/af903x.h:9, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/arch/arm/include/asm/atomic.h:32:5: warning: "__LINUX_ARM_ARCH__" is not defined [-Wundef] In file included from /lib/modules/3.10.24/source/include/linux/mmzone.h:9:0, from /lib/modules/3.10.24/source/include/linux/gfp.h:4, from /lib/modules/3.10.24/source/include/linux/slab.h:12, from /home/pi/download/a867_drv_v1.0.29/af903x.h:9, from /home/pi/download/a867_drv_v1.0.29/af903x-core.c:1: /lib/modules/3.10.24/source/include/linux/wait.h:8:25: fatal error: asm/current.h: No such file or directory compilation terminated. make[3]: *** [/home/pi/download/a867_drv_v1.0.29/af903x-core.o] Error 1 make[2]: *** [_module_/home/pi/download/a867_drv_v1.0.29] Error 2 make[1]: *** [sub-make] Error 2 make[1]: Leaving directory `/lib/modules/3.10.24/source' make: *** [default] Error 2

[misak]

Příloha:

• priloha_lepe_citelne.txt (12170 bytů)

prikladam v priloze. je to lepe citelne

[misak]

teď mi make vypíše toto: /toolchain/arm-bcm2708hardfp-linux-gnueabi/bin/bcm2708hardfp-gcc: Command not found

nesetkal se s tím někdy někdo?

make[2]: /toolchain/arm-bcm2708hardfp-linux-gnueabi/bin/bcm2708hardfp-gcc: Command not found

CC [M] /home/pi/download/a867_drv_v1.0.29/af903x-core.o

/bin/sh: 1: /toolchain/arm-bcm2708hardfp-linux-gnueabi/bin/bcm2708hardfp-gcc: not found

make[3]: *** [/home/pi/download/a867_drv_v1.0.29/af903x-core.o] Error 127

make[2]: *** [_module_/home/pi/download/a867_drv_v1.0.29] Error 2

make[1]: *** [sub-make] Error 2

make[1]: Leaving directory `/lib/modules/3.10.24/source'

make: *** [default] Error 2

[jadd]

Občas se na tvoje pokusy dívám a vzpomínám na své u H826. Je třeba si uvědomit, že výrobce poskytl ovladač ke starší verzi jádra. A od té doby se funkce jádra minimálně přejmenovaly (viz.). Proto ovladač už nemusí něco najít ve zdrojových kódech,dokud ty rozbalené soubory ovladače neopravíš, pokud je to skutečně tak. Kup si radši kartu, která je podporovaná už jádrem.

[petr]

Ani s jinou kartou nemusí mít s DVB-T v linuxu vyhráno, viz http://www.abclinuxu.cz/poradna/linux/show/387646

[misak]

právě že tahle je pro linux: AVerTV Volar HD Nano, chipset AF 9035 http://www.linuxtv.org/wiki/index.php/Afatech_AF9035 Samotný výrobce mi odepsal: Linux kernel already has built-in support for AVerMedia A867 Na webu má výrobce: It doesn't work with Linux 2.6.21 and earlier kernel version.

No nevadí, nějak se s tím poperu. Jen z práce přijdu vždy bůch ví kdy, tak to robím po večerech. Pak zas jít rozumně spát :D Až to rozběhám, hodím se návod :)

[Prcek]

Už jsi to rozběhal? Taky jsem zakoupil tenhle kus a snažím se nainstalovat driver .

[Prcek]

Aha, tak nic, driver je v jádře pod názvem AF9035 (viz AVerMedia AverTV Volar HD nano (a867r))