Portál AbcLinuxu, 7. prosince 2025 23:24


Dotaz: Problem pri vypalovani s xcdroast

24.8.2003 09:35 carten
Problem pri vypalovani s xcdroast
Přečteno: 91×
Odpovědět | Admin
Kdyz ykousim vypalovat pomoci xcdroast (pouziva cdrecord). Vse zacne OK a asi pri 10% se vypalovani prerusi. Tady je log.


Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=0,0,0 gracetime=2 fs=4096k -v driveropts=burnfree speed=1 -eject -pad tsize=105184s -
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.24
Cdrecord 2.0 (i586-mandrake-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'TEAC '
Identifikation : 'CD-W516EB '
Revision : '1.0B'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1674624 = 1635 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 205 MB padsize: 30 KB
Total size: 235 MB (23:22.68) = 105201 sectors
Lout start: 236 MB (23:24/51) = 105201 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type A, high Beta category (A+) (3)
ATIP start of lead in: -11077 (97:34/23)
ATIP start of lead out: 359848 (79:59/73)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 359848 Blocks current: 359848 Blocks
remaining: 254647
Starting to write CD/DVD at speed 4 in real TAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 1C 75 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.255s timeout 40s
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
write track data: error after 14919680 bytes
Writing time: 36.209s
Average write speed 46.8x.
Min drive buffer fill was 100%
Fixating...
Fixating time: 60.902s
cdrecord: fifo had 299 puts and 236 gets.
cdrecord: fifo was 0 times empty and 221 times full, min fill was 90%.
Nástroje: Začni sledovat (0) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

24.8.2003 12:11 asdf
Rozbalit Rozbalit vše Problem pri vypalovani s xcdroast
Odpovědět | | Sbalit | Link | Blokovat | Admin

zkus si updatnout firmware, jestli problem pretrva?
tu

25.8.2003 22:14 carten
Rozbalit Rozbalit vše Problem pri vypalovani s xcdroast
Parada. Uz to jede. Stacilo upgradovat firmware. Dik za pomoc.
24.8.2003 23:02 Ondra 'Kepi' Kudlík | skóre: 29 | Brno
Rozbalit Rozbalit vše Problem pri vypalovani s xcdroast
Odpovědět | | Sbalit | Link | Blokovat | Admin
Je dost možný, že máš chybu v cdrecord. Například v unstable debianu je momentálně taky chybnej... podle nahlášené chyby to chcípá uprostřed vypalování... zkus starší verzi.

Založit nové vláknoNahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.