Portál AbcLinuxu, 5. května 2025 11:45
[ 87.533]
X.Org X Server 1.19.2
Release Date: 2017-03-02
[ 87.533] X Protocol Version 11, Revision 0
[ 87.533] Build Operating System: Linux 4.9.41-v7+ armv7l Raspbian
[ 87.533] Current Operating System: Linux raspberrypi 4.14.98-v7+
#1200 SMP Tue Feb 12 20:27:48 GMT 2019 armv7l
[ 87.533] Kernel command line: 8250.nr_uarts=0
bcm2708_fb.fbwidth=1920 bcm2708_fb.fbheight=1080 bcm2708_fb.fbswap=1
vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000
dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1
root=PARTUUID=75f87266-02 rootfstype=ext4 elevator=deadline
fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 87.534] Build Date: 18 October 2017 04:55:30PM
[ 87.534] xorg-server 2:1.19.2-1+rpt1+deb9u2
(https://www.debian.org/support)
[ 87.534] Current version of pixman: 0.34.0
[ 87.534] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 87.534] Markers: (--) probed, (**) from config file, (==) default
setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 87.534] (==) Log file: "/home/pi/.local/share/xorg/Xorg.0.log", Time: Tue May 7 20:56:31 2019
[ 87.535] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 87.536] (==) No Layout section. Using the first Screen section.
[ 87.536] (==) No screen section available. Using defaults.
[ 87.536] (**) |-->Screen "Default Screen Section" (0)
[ 87.536] (**) | |-->Monitor "default monitor"
[ 87.537] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 87.537] (**) | |-->Device "Allwinner A10/A13 FBDEV"
[ 87.537] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 87.537] (==) Automatically adding devices
[ 87.537] (==) Automatically enabling devices
[ 87.538] (==) Automatically adding GPU devices
[ 87.538] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 87.538] (WW) The directory "/usr/share/fonts/X11/misc" does not exist.
[ 87.538] Entry deleted from font path.
[ 87.538] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not
exist.
[ 87.538] Entry deleted from font path.
[ 87.538] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not
exist.
[ 87.538] Entry deleted from font path.
[ 87.538] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not
exist.
[ 87.538] Entry deleted from font path.
[ 87.538] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 87.538] Entry deleted from font path.
[ 87.538] (WW) The directory "/usr/share/fonts/X11/100dpi" does not
exist.
[ 87.538] Entry deleted from font path.
[ 87.538] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 87.538] Entry deleted from font path.
[ 87.538] (==) FontPath set to:
built-ins
[ 87.538] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 87.538] (II) The server relies on udev to provide the list of input
devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 87.538] (II) Loader magic: 0x1fbf40
[ 87.539] (II) Module ABI versions:
[ 87.539] X.Org ANSI C Emulation: 0.4
[ 87.539] X.Org Video Driver: 23.0
[ 87.539] X.Org XInput driver : 24.1
[ 87.539] X.Org Server Extension : 10.0
[ 87.550] (II) systemd-logind: took control of session
/org/freedesktop/login1/session/c2
[ 87.551] (II) no primary bus or device found
[ 87.551] (II) LoadModule: "glx"
[ 87.552] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 87.561] (II) Module glx: vendor="X.Org Foundation"
[ 87.561] compiled for 1.19.2, module version = 1.0.0
[ 87.561] ABI class: X.Org Server Extension, version 10.0
[ 87.561] (II) LoadModule: "fbturbo"
[ 87.562] (WW) Warning, couldn't open module fbturbo
[ 87.562] (II) UnloadModule: "fbturbo"
[ 87.562] (II) Unloading fbturbo
[ 87.562] (EE) Failed to load module "fbturbo" (module does not exist, 0)
[ 87.562] (EE) No drivers available.
[ 87.562] (EE)
Fatal server error:
[ 87.562] (EE) no screens found(EE)
[ 87.563] (EE)
Please consult the The X.Org Foundation support at http://wiki.x.org for help.
[ 87.563] (EE) Please also check the log file at "/home/pi/.local/share/xorg/Xorg.0.log" for additional information.
[ 87.563] (EE)
[ 87.566] (EE) Server terminated with error (1). Closing log file.
8.5.2019 14:32
k3dAR | skóre: 63
jednak je to starsi verze, druhak instalovat jedine z repositare:
sudo apt update && sudo apt install xserver-xorg-video-fbturbo
8.5.2019 14:46
k3dAR | skóre: 63
muzes zkusit odmazat(pokud je): /etc/X11/xorg.conf, take muzes zkusit v raspi-config zmenit zpatky to co si prepinal, pripadne posli co mas v /boot/config.txt a /boot/cmdline.txt, tam(mimojine) dela zmeny raspi-config...
root@raspberrypi:~# cat /boot/config.txt
# For more options and information see
# http://rpf.io/configtxt
# Some settings may impact device functionality. See link above for details
# uncomment if you get no picture on HDMI for a default "safe" mode
#hdmi_safe=1
# uncomment this if your display has a black border of unused pixels visible
# and your display can output without overscan
disable_overscan=1
# uncomment the following to adjust overscan. Use positive numbers if console
# goes off screen, and negative if there is too much border
#overscan_left=16
#overscan_right=16
#overscan_top=16
#overscan_bottom=16
# uncomment to force a console size. By default it will be display's size minus
# overscan.
#framebuffer_width=1280
#framebuffer_height=720
# uncomment if hdmi display is not detected and composite is being output
#hdmi_force_hotplug=1
# uncomment to force a specific HDMI mode (this will force VGA)
#hdmi_group=1
#hdmi_mode=19
# uncomment to force a HDMI mode rather than DVI. This can make audio work in
# DMT (computer monitor) modes
#hdmi_drive=2
# uncomment to increase signal to HDMI, if you have interference, blanking, or
# no display
#config_hdmi_boost=4
# uncomment for composite PAL
#sdtv_mode=2
#uncomment to overclock the arm. 700 MHz is the default.
#arm_freq=800
# Uncomment some or all of these to enable the optional hardware interfaces
#dtparam=i2c_arm=on
#dtparam=i2s=on
#dtparam=spi=on
# Uncomment this to enable the lirc-rpi module
#dtoverlay=lirc-rpi
# Additional overlays and parameters are documented /boot/overlays/README
# Enable audio (loads snd_bcm2835)
dtparam=audio=on
cat /boot/cmdline.txt
dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=75f87266-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
# instalace nastroje pro kontrolu sudo apt install debsums # kontrola debsums xserver-xorg-video-fbturbo # pripadne zkontrolovat vsechny balicky, s volbou aby to zobrazova pouze pripadne errory debsums --silentv config.txt vidim jen ze mas zakazanej overscan, coz by jen melo vliv na to jestli je/neni videt pripadnej cernej ramecek kolem obrazu...
root@raspberrypi:~# debsums xserver-xorg-video-fbturbo
/usr/lib/arm-linux-gnueabihf/xorg/modules/drivers/fbturbo_drv.so OK
/usr/share/X11/xorg.conf.d.99-sunxifb.conf OK
/usr/share/doc/xserver-xorg-video-fbturbo/changelog.Debian.gz OK
/usr/share/man/man4/fbturbo.4.gz OK
root@raspberrypi:~# modprobe fbturbo
modprobe: FATAL: Module fbturbo not found in directory /lib/modules/4.14.98-v7+
root@raspberrypi:~# find / -type f -name *fbturbo*
/usr/lib/arm-linux-gnueabihf/xorg/modules/drivers/fbturbo_drv.so
/usr/share/man/man4/fbturbo.4.gz
/usr/share/X11/xorg.conf.d/99-fbturbo.conf
/var/lib/dpkg/info/xserver-xorg-video-fbturbo.md5sums
/var/lib/dpkg/info/xserver-xorg-video-fbturbo.list
/var/lib/dpkg/info/xserver-xorg-video-fbturbo.conffiles
$ dpkg -l | grep xserver-xorg-video-fbturbo ii xserver-xorg-video-fbturbo 1.20170324~143242 armhf X.Org X server -- fbturbo display driverdebsums xserver-xorg-video-fbturbo
/usr/lib/xorg/modules/drivers/fbturbo_drv.la OK /usr/lib/xorg/modules/drivers/fbturbo_drv.so OK /usr/share/X11/xorg.conf.d/99-fbturbo.conf OK /usr/share/doc/xserver-xorg-video-fbturbo/changelog.gz OK /usr/share/man/man4/fbturbo.4.gz OKfind / -type f -name *fbturbo*
/usr/lib/xorg/modules/drivers/fbturbo_drv.la /usr/lib/xorg/modules/drivers/fbturbo_drv.so /usr/share/X11/xorg.conf.d/99-fbturbo.conf /usr/share/man/man4/fbturbo.4.gz /var/lib/dpkg/info/xserver-xorg-video-fbturbo.md5sums /var/lib/dpkg/info/xserver-xorg-video-fbturbo.list /var/lib/dpkg/info/xserver-xorg-video-fbturbo.postinstto ze mas jinej balicek nemusi byt problem, pokud mas stejne jine i vsechny dalsi X.Org, ale je mi to divne
co ti hlasi za verzi?
$ lsb_release -d Description: Raspbian GNU/Linux 9.9 (stretch)
root@raspberrypi:/lib/modules/4.14.98-v7+# lsb_release -d
Description: Raspbian GNU/Linux 9.9 (stretch)
root@raspberrypi:/etc/apt# dpkg -l | grep xserver-xorg-
ii xserver-xorg-core 2:1.19.2-1+rpt1+deb9u2 armhf Xorg X server - core server
ii xserver-xorg-input-all 1:7.7+19 armhf X.Org X server -- input driver metapackage
ii xserver-xorg-input-libinput 0.23.0-2 armhf X.Org X server -- libinput input driver
ii xserver-xorg-video-fbdev 1:0.4.4-1+rvt+b1 armhf X.Org X server -- fbdev display driver
ii xserver-xorg-video-fbturbo 2:0.4.0+2016-05-05-dmo5 armhf X.Org X server -- fbturbo display driver
ldd /usr/lib/xorg/modules/drivers/fbturbo_drv.so|grep not
root@raspberrypi:/etc/apt# ldd /usr/lib/xorg/modules/drivers/fbturbo_drv.so|grep not
ldd: /usr/lib/xorg/modules/drivers/fbturbo_drv.so: Datei oder Verzeichnis nicht gefunden
root@raspberrypi:/lib/modules/4.14.98-v7+# ldd /usr/lib/arm-linux-gnueabihf/xorg/modules/drivers/fbturbo_drv.so
linux-vdso.so.1 (0x7efdb000)
/usr/lib/arm-linux-gnueabihf/libarmmem.so (0x76eeb000)
libUMP.so.3 => /usr/lib/arm-linux-gnueabihf/libUMP.so.3 (0x76ec2000)
libpthread.so.0 => /lib/arm-linux-gnueabihf/libpthread.so.0 (0x76e99000)
libc.so.6 => /lib/arm-linux-gnueabihf/libc.so.6 (0x76d5a000)
/lib/ld-linux-armhf.so.3 (0x76f1e000)
root@raspberrypi:/lib/modules/4.14.98-v7+#
root@raspberrypi:/etc/apt# cat /etc/apt/sources.list.d/raspi.list
deb http://archive.raspberrypi.org/debian/ stretch main ui
# Uncomment line below then 'apt-get update' to enable 'apt-get source'
#deb-src http://archive.raspberrypi.org/debian/ stretch main ui
root@raspberrypi:/etc/apt# cat /etc/apt/sources.list
deb http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
# Uncomment line below then 'apt-get update' to enable 'apt-get source'
#deb-src http://raspbian.raspberrypi.org/raspbian/ stretch main contrib non-free rpi
deb http://www.deb-multimedia.org stretch main non-free
deb http://www.deb-multimedia.org stretch main non-freetohle asi vysvetluje proc mas jine/starsi X.Org baliky, tohle repo nepouzivam, takze jeho specifika neznam a neporadim... osobne bych zkusil dohledat ktere baliky jsou z nej isntalovane, pak repo odebral udelal "apt udpate" a vsechny ty baliky preinstaloval "apt --install reinstall balik", ale mozna se to nabori jeste vice, otazka zda nebude lepsi udelat cistej image=>karta, nebo ten deb-multimadia pozadujes kvuli necemu co mi unika?
8.5.2019 19:15
k3dAR | skóre: 63
for pkg in $(dpkg -l | awk '{print $2}' | grep xorg); do apt-cache madison ${pkg}; done | grep deb-multimediafor pkg in $(dpkg -l | awk '{print $2}'); do apt-cache madison ${pkg}; done | grep deb-multimedia
mozna to jde i jinak/kratsi zapis/parametr (+ madison trva dlouho nez to dohleda), ale pro "apt policy balicek*" neni(?) jednoradkovej vypis a "apt-cache madison" zas nepodporuje zastupnou hvezdicku...
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.