Opět připojení k internetu přes 2 providery (vyřešeno)

Mám 2 připojení k internetu a snažím se postavit router. Použil jsem https://lartc.org/howto/lartc.rpdb.multiple-links.html a narazil jsem u balancování odchozího provozu. Jeden provider má adresy v siti xxx.xxx.xxx.220/30, druhý 10.40.10.32/24 (Vše je opisováno z fota obrazovky, za překlepy se omlouvám.)

 # ip rule show
0:      from all lookup local
32764:  from xxx.xxx.xxx.220 lookup 120
32765:  from 10.40.10.32 lookup 110
32766:  from all lookup main
32767:  from all lookup default

 # ip route show table local
broadcast 10.40.10.0 dev netéě scope link  src 10.40.10.32
local 10.40.10.0 dev netéě scope host  src 10.40.10.32
broadcast 10.40.10.255 dev netéě scope link  src 10.40.10.32
broadcast 127.0.0.0 dev lo scope link  src 127.0.0.1
local 127.0.0.0/8 dev lo scope host  src 127.0.0.1
local 127.0.0.1 dev lo scope host  src 127.0.0.1
broadcast 127.255.255.255 dev lo scope link  src 127.0.0.1
broadcast 172.18.20.0 dev bond0.4001 scope link  src 172.18.20.254
local 172.18.20.254 dev bond0.4001 scope host  src 172.18.20.254
broadcast 172.18.20.255 dev bond0.4001 scope link  src 172.18.20.254
broadcast 172.18.151.252 dev bond0.4010 scope link  src 172.18.151.254
local 172.18.151.254 dev bond0.4010 scope host  src 172.18.151.254
broadcast 172.18.151.255 dev bond0.4010 scope link  src 172.18.151.254
broadcast 192.168.254.0 dev bond0.4090 scope link  src 192.168.254.254
local 192.168.254.254 dev bond0.4090 scope host  src 192.168.254.254
broadcast 192.168.254.255 dev bond0.4090 scope link  src 192.168.254.254
broadcast xxx.xxx.xxx.200 dev bond0.4080 scope link  src xxx.xxx.xxx.202
local xxx.xxx.xxx.202 dev bond0.4080 scope host  src xxx.xxx.xxx.202
broadcast xxx.xxx.xxx.203 dev bond0.4080 scope link  src xxx.xxx.xxx.202

 # ip route show table main
10.40.10.0/24 dev net02 scope link  src 10.40.10.32
127.0.0.0/8 dev lo scpe link
172.18.20.0/24 dev bond0.4001 scope link  src 172.18.20.254
172.18.151.0/24 via 172.18.151.253 dev bond0.4010
172.18.151.252/30 dev bond0.4010 scope link  src 172.18.20.254
172.23.235.0/24 via 172.18.151.253 dev bond0.4010
172.27.235.0/24 via 172.18.151.253 dev bond0.4010
172.28.235.0/24 via 172.18.151.253 dev bond0.4010
192.160.254.0/24 dev bond0.4090 scope link  src 192.168.254.254
xxx.xxx.xxx.200/30 dev bond0.4080 scope link  src xxx.xxx.xxx.202

 # ip route show table default
(prázdná)

 # ip route show table 110
default via 10.40.10.254 dev net02
10.40.10.0/24 dev net02 scope link  src 10.40.10.32
172.18.20.0/24 dev bond0.4001 scope link
172.18.151.252./30 dev bond.4010 scope link
192.168.254.0/24 dev bond0.4090 scope link

 # ip route show table 120
default via xxx.xxx.xxx.201 dev bond0.4080
172.18.20.0/24 dev bond0.4001 scope link
172.18.151.252./30 dev bond.4010 scope link
192.168.254.0/24 dev bond0.4090 scope link
xxx.xxx.xxx.200/30 dev bond0.4080 scope link  src xxx.xxx.xxx.202

Ale když se za tohoto stavu pokusím zavést multipath route, tak dostanu chybovou hlášku

 # ip roude add default scope global nexthop via 10.40.10.254 dev net02 weight 1 nexthop via xxx.xxx.xxx.201 dev bond0.4080 weight 1
ip: either "to" is duplicate, or "nexthop" is garbage

Dotaz: Opět připojení k internetu přes 2 providery

Odpovědi