Portál AbcLinuxu, 4. května 2025 10:49
Bus 003 Device 008: ID 1a86:7523 QinHeng Electronics CH340 serial converter
5.10.84-1-MANJARO #1 SMP PREEMPT Wed Dec 8 09:50:30 UTC 2021 x86_64 GNU/LinuxCo s tím? Díky.
Řešení dotazu:
[ 0.000000] microcode: microcode updated early to revision 0x21, date = 2019-02-13 [ 0.000000] Linux version 5.10.84-1-MANJARO (builduser@fv-az72-805) (gcc (GCC) 11.1.0, GNU ld (GNU Binutils) 2.36.1) #1 SMP PREEMPT Wed Dec 8 09:50:30 UTC 2021 [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.10-x86_64 root=UUID=7f67cdbb-f0fe-4683-bbde-105f8e434d02 rw rootflags=subvol=@ quiet udev.log_priority=3 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000b88fefff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b88ff000-0x00000000b9c7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000b9c7f000-0x00000000b9f70fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000b9f71000-0x00000000b9f7efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000b9f7f000-0x00000000b9ffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000ba000000-0x00000000bf1fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023edfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.7 present. [ 0.000000] DMI: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.64 04/27/2016 [ 0.000000] tsc: Fast TSC calibration failed [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] last_pfn = 0x23ee00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0FF800000 mask FFF800000 write-protect [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0BB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask F00000000 write-back [ 0.000000] 6 base 200000000 mask FC0000000 write-back [ 0.000000] 7 base 23F000000 mask FFF000000 uncachable [ 0.000000] 8 base 23EE00000 mask FFFE00000 uncachable [ 0.000000] 9 disabled [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0xba000 max_arch_pfn = 0x400000000 [ 0.000000] check: Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x36717000-0x37382fff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F2F10 000024 (v02 HPQOEM) [ 0.000000] ACPI: XSDT 0x00000000B9FFE120 000094 (v01 HPQOEM SLIC-MPC 0000000F 01000013) [ 0.000000] ACPI: FACP 0x00000000B9FFC000 00010C (v05 HPQOEM 179B 0000000F HP 00000001) [ 0.000000] ACPI: DSDT 0x00000000B9FD3000 02362C (v02 HPQOEM 179B 00000001 INTL 20110112) [ 0.000000] ACPI: FACS 0x00000000B9C34000 000040 [ 0.000000] ACPI: FACS 0x00000000B9C34000 000040 [ 0.000000] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: APIC 0x00000000B9FFA000 0000BC (v01 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: TCPA 0x00000000B9FF7000 000032 (v02 HPQOEM 179B 00000000 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FD0000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FCF000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112) [ 0.000000] ACPI: SLIC 0x00000000B9FCE000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001) [ 0.000000] ACPI: FPDT 0x00000000B9FCC000 000044 (v01 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: BGRT 0x00000000B9FCB000 000038 (v00 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: SSDT 0x00000000B9FCA000 0009B6 (v01 PmRef Cpu0Ist 00003000 INTL 20110112) [ 0.000000] ACPI: SSDT 0x00000000B9FC9000 000AAD (v01 PmRef CpuPm 00003000 INTL 20110112) [ 0.000000] ACPI: DMAR 0x00000000B9FC8000 0000B8 (v01 INTEL SNB 00000001 INTL 00000001) [ 0.000000] ACPI: ASF! 0x00000000B9FF8000 0000A5 (v32 HPQOEM 179B 00000001 HP 00000001) [ 0.000000] ACPI: Reserving FACP table memory at [mem 0xb9ffc000-0xb9ffc10b] [ 0.000000] ACPI: Reserving DSDT table memory at [mem 0xb9fd3000-0xb9ff662b] [ 0.000000] ACPI: Reserving FACS table memory at [mem 0xb9c34000-0xb9c3403f] [ 0.000000] ACPI: Reserving FACS table memory at [mem 0xb9c34000-0xb9c3403f] [ 0.000000] ACPI: Reserving HPET table memory at [mem 0xb9ffb000-0xb9ffb037] [ 0.000000] ACPI: Reserving APIC table memory at [mem 0xb9ffa000-0xb9ffa0bb] [ 0.000000] ACPI: Reserving MCFG table memory at [mem 0xb9ff9000-0xb9ff903b] [ 0.000000] ACPI: Reserving TCPA table memory at [mem 0xb9ff7000-0xb9ff7031] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xb9fd0000-0xb9fd02c9] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xb9fcf000-0xb9fcf489] [ 0.000000] ACPI: Reserving SLIC table memory at [mem 0xb9fce000-0xb9fce175] [ 0.000000] ACPI: Reserving FPDT table memory at [mem 0xb9fcc000-0xb9fcc043] [ 0.000000] ACPI: Reserving BGRT table memory at [mem 0xb9fcb000-0xb9fcb037] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xb9fca000-0xb9fca9b5] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0xb9fc9000-0xb9fc9aac] [ 0.000000] ACPI: Reserving DMAR table memory at [mem 0xb9fc8000-0xb9fc80b7] [ 0.000000] ACPI: Reserving ASF! table memory at [mem 0xb9ff8000-0xb9ff80a4] [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023edfffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x23edf8000-0x23edfbfff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000023edfffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff] [ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff] [ 0.000000] node 0: [mem 0x0000000040005000-0x00000000b88fefff] [ 0.000000] node 0: [mem 0x00000000b9c7f000-0x00000000b9f70fff] [ 0.000000] node 0: [mem 0x00000000b9fff000-0x00000000b9ffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000023edfffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023edfffff] [ 0.000000] On node 0 totalpages: 2062221 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 11752 pages used for memmap [ 0.000000] DMA32 zone: 752113 pages, LIFO batch:63 [ 0.000000] Normal zone: 20408 pages used for memmap [ 0.000000] Normal zone: 1306112 pages, LIFO batch:63 [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges [ 0.000000] On node 0, zone DMA: 99 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 512 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 1 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 4992 pages in unavailable ranges [ 0.000000] On node 0, zone DMA32: 142 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 24576 pages in unavailable ranges [ 0.000000] On node 0, zone Normal: 4608 pages in unavailable ranges [ 0.000000] Reserving Intel graphics memory at [mem 0xbb200000-0xbf1fffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] TSC deadline timer available [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x20000000-0x201fffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x40004000-0x40004fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xb88ff000-0xb9c7efff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xb9f71000-0xb9f7efff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xb9f7f000-0xb9ffefff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xba000000-0xbf1fffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xbf200000-0xdfffffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfebfffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed10000-0xfed13fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed14000-0xfed17fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed18000-0xfed19fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xfee01000-0xffafffff] [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0xffb00000-0xffffffff] [ 0.000000] [mem 0xbf200000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 64 pages/cpu s225280 r8192 d28672 u262144 [ 0.000000] pcpu-alloc: s225280 r8192 d28672 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2029976 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.10-x86_64 root=UUID=7f67cdbb-f0fe-4683-bbde-105f8e434d02 rw rootflags=subvol=@ quiet udev.log_priority=3 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 7985444K/8248884K available (14344K kernel code, 2065K rwdata, 9168K rodata, 1740K init, 4204K bss, 263180K reserved, 0K cma-reserved) [ 0.000000] random: get_random_u64 called from __kmem_cache_create+0x2a/0x4c0 with crng_init=0 [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 41939 entries in 164 pages [ 0.000000] ftrace: allocated 164 pages with 3 groups [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8. [ 0.000000] rcu: RCU priority boosting: priority 1 delay 500 ms. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] printk: console [tty0] enabled [ 0.000000] ACPI: Core revision 20200925 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.000000] DMAR: Host address width 36 [ 0.000000] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 [ 0.000000] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a [ 0.000000] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 [ 0.000000] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a [ 0.000000] DMAR: RMRR base: 0x000000b9c0f000 end: 0x000000b9c2efff [ 0.000000] DMAR: RMRR base: 0x000000bb000000 end: 0x000000bf1fffff [ 0.000000] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1 [ 0.000000] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 [ 0.000000] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. [ 0.000000] DMAR-IR: Enabled IRQ remapping in x2apic mode [ 0.000000] x2apic enabled [ 0.000000] Switched APIC routing to cluster x2apic. [ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.019999] tsc: PIT calibration matches HPET. 1 loops [ 0.019999] tsc: Detected 2594.231 MHz processor [ 0.000004] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2564f26f9f7, max_idle_ns: 440795305617 ns [ 0.000008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5190.64 BogoMIPS (lpj=8647436) [ 0.000011] pid_max: default: 32768 minimum: 301 [ 0.000043] LSM: Security Framework initializing [ 0.000048] Yama: becoming mindful. [ 0.000080] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000096] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.000372] mce: CPU0: Thermal monitoring enabled (TM1) [ 0.000380] process: using mwait in idle threads [ 0.000383] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.000384] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.000387] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.000388] Spectre V2 : Mitigation: Full generic retpoline [ 0.000389] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.000390] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.000391] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.000392] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.000393] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.000396] SRBDS: Vulnerable: No microcode [ 0.000396] MDS: Mitigation: Clear CPU buffers [ 0.000604] Freeing SMP alternatives memory: 36K [ 0.002701] smpboot: CPU0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz (family: 0x6, model: 0x3a, stepping: 0x9) [ 0.002846] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.002855] ... version: 3 [ 0.002856] ... bit width: 48 [ 0.002856] ... generic registers: 4 [ 0.002857] ... value mask: 0000ffffffffffff [ 0.002858] ... max period: 00007fffffffffff [ 0.002859] ... fixed-purpose events: 3 [ 0.002859] ... event mask: 000000070000000f [ 0.002997] rcu: Hierarchical SRCU implementation. [ 0.003340] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.003340] smp: Bringing up secondary CPUs ... [ 0.003340] x86: Booting SMP configuration: [ 0.003340] .... node #0, CPUs: #1 [ 0.003452] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.003514] #2 #3 [ 0.009103] smp: Brought up 1 node, 4 CPUs [ 0.009103] smpboot: Max logical packages: 2 [ 0.009103] smpboot: Total of 4 processors activated (20762.59 BogoMIPS) [ 0.010276] devtmpfs: initialized [ 0.010276] x86/mm: Memory block size: 128MB [ 0.010594] PM: Registering ACPI NVS region [mem 0xb9f71000-0xb9f7efff] (57344 bytes) [ 0.010594] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.010594] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.010594] pinctrl core: initialized pinctrl subsystem [ 0.010594] PM: RTC time: 15:05:54, date: 2021-12-28 [ 0.010594] NET: Registered protocol family 16 [ 0.010594] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations [ 0.010610] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.010685] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.010696] audit: initializing netlink subsys (disabled) [ 0.010710] audit: type=2000 audit(1640703954.029:1): state=initialized audit_enabled=0 res=1 [ 0.010710] thermal_sys: Registered thermal governor 'fair_share' [ 0.010710] thermal_sys: Registered thermal governor 'bang_bang' [ 0.010710] thermal_sys: Registered thermal governor 'step_wise' [ 0.010710] thermal_sys: Registered thermal governor 'user_space' [ 0.010710] thermal_sys: Registered thermal governor 'power_allocator' [ 0.010710] cpuidle: using governor ladder [ 0.010710] cpuidle: using governor menu [ 0.010710] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.010710] ACPI: bus type PCI registered [ 0.010710] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.010710] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.010710] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.010710] PCI: Using configuration type 1 for base access [ 0.010710] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.010710] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.010710] mtrr: your CPUs had inconsistent variable MTRR settings [ 0.010710] mtrr: probably your BIOS does not setup all CPUs. [ 0.010710] mtrr: corrected configuration. [ 0.011041] Kprobes globally optimized [ 0.013365] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.013439] ACPI: Added _OSI(Module Device) [ 0.013440] ACPI: Added _OSI(Processor Device) [ 0.013441] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.013441] ACPI: Added _OSI(Processor Aggregator Device) [ 0.013443] ACPI: Added _OSI(Linux-Dell-Video) [ 0.013444] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.013445] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.028577] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.029766] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.046913] ACPI: Dynamic OEM Table Load: [ 0.046921] ACPI: SSDT 0xFFFF8E7680BA8000 000861 (v01 PmRef Cpu0Cst 00003001 INTL 20110112) [ 0.048034] ACPI: Dynamic OEM Table Load: [ 0.048039] ACPI: SSDT 0xFFFF8E7680BB5800 000303 (v01 PmRef ApIst 00003000 INTL 20110112) [ 0.048919] ACPI: Dynamic OEM Table Load: [ 0.048924] ACPI: SSDT 0xFFFF8E7680F49000 000119 (v01 PmRef ApCst 00003000 INTL 20110112) [ 0.050705] ACPI: EC: EC started [ 0.050706] ACPI: EC: interrupt blocked [ 0.488466] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.488469] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions [ 0.488470] ACPI: Interpreter enabled [ 0.488494] ACPI: (supports S0 S3 S4 S5) [ 0.488496] ACPI: Using IOAPIC for interrupt routing [ 0.488523] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.488888] ACPI: Enabled 8 GPEs in block 00 to 3F [ 0.491764] ACPI: Power Resource [APPR] (off) [ 0.494684] ACPI: Power Resource [COMP] (on) [ 0.495437] ACPI: Power Resource [LPP] (on) [ 0.499507] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.499512] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.500973] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC] [ 0.502885] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability] [ 0.502886] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.503561] PCI host bridge to bus 0000:00 [ 0.503563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.503565] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.503566] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.503567] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window] [ 0.503568] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window] [ 0.503569] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window] [ 0.503570] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.503583] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000 [ 0.503683] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000 [ 0.503692] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit] [ 0.503698] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref] [ 0.503702] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f] [ 0.503874] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330 [ 0.503892] pci 0000:00:14.0: reg 0x10: [mem 0xd4720000-0xd472ffff 64bit] [ 0.503962] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.504064] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000 [ 0.504084] pci 0000:00:16.0: reg 0x10: [mem 0xd4734000-0xd473400f 64bit] [ 0.504166] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.504252] pci 0000:00:16.3: [8086:1e3d] type 00 class 0x070002 [ 0.504267] pci 0000:00:16.3: reg 0x10: [io 0x4090-0x4097] [ 0.504276] pci 0000:00:16.3: reg 0x14: [mem 0xd473b000-0xd473bfff] [ 0.504444] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000 [ 0.504457] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff] [ 0.504465] pci 0000:00:19.0: reg 0x14: [mem 0xd473a000-0xd473afff] [ 0.504473] pci 0000:00:19.0: reg 0x18: [io 0x4060-0x407f] [ 0.504540] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.504640] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320 [ 0.504656] pci 0000:00:1a.0: reg 0x10: [mem 0xd4739000-0xd47393ff] [ 0.504750] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.504851] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300 [ 0.504868] pci 0000:00:1b.0: reg 0x10: [mem 0xd4730000-0xd4733fff 64bit] [ 0.504956] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.505061] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400 [ 0.505163] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.505274] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400 [ 0.505411] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.505486] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400 [ 0.505587] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.505708] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400 [ 0.505809] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.505930] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320 [ 0.505946] pci 0000:00:1d.0: reg 0x10: [mem 0xd4738000-0xd47383ff] [ 0.506039] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.506141] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100 [ 0.506340] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601 [ 0.506352] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f] [ 0.506359] pci 0000:00:1f.2: reg 0x14: [io 0x409c-0x409f] [ 0.506367] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087] [ 0.506374] pci 0000:00:1f.2: reg 0x1c: [io 0x4098-0x409b] [ 0.506381] pci 0000:00:1f.2: reg 0x20: [io 0x4040-0x405f] [ 0.506388] pci 0000:00:1f.2: reg 0x24: [mem 0xd4737000-0xd47377ff] [ 0.506437] pci 0000:00:1f.2: PME# supported from D3hot [ 0.506566] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.506572] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 0.506688] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.506692] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 0.506695] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.506829] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010 [ 0.506871] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff] [ 0.506894] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff] [ 0.507268] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000 [ 0.507303] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff] [ 0.507416] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref] [ 0.507660] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501 [ 0.507695] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff] [ 0.508092] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.508097] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 0.508363] pci 0000:24:00.0: [8086:0082] type 00 class 0x028000 [ 0.508541] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit] [ 0.509402] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold [ 0.509925] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.509930] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 0.511351] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.511426] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.511497] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.511569] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.511640] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.511710] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.511781] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *10 11 12 14 15) [ 0.511852] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.512349] ACPI: EC: interrupt unblocked [ 0.512350] ACPI: EC: event unblocked [ 0.512356] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 [ 0.512357] ACPI: EC: GPE=0x16 [ 0.512358] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete [ 0.512359] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events [ 0.512406] iommu: Default domain type: Translated [ 0.513363] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.513363] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.513363] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.513363] vgaarb: loaded [ 0.513527] SCSI subsystem initialized [ 0.513535] libata version 3.00 loaded. [ 0.513535] ACPI: bus type USB registered [ 0.513535] usbcore: registered new interface driver usbfs [ 0.513535] usbcore: registered new interface driver hub [ 0.513535] usbcore: registered new device driver usb [ 0.513535] pps_core: LinuxPPS API ver. 1 registered [ 0.513535] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.513535] PTP clock support registered [ 0.513535] EDAC MC: Ver: 3.0.0 [ 0.513549] NetLabel: Initializing [ 0.513549] NetLabel: domain hash size = 128 [ 0.513549] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.513549] NetLabel: unlabeled traffic allowed by default [ 0.513549] PCI: Using ACPI for IRQ routing [ 0.518520] PCI: pci_cache_line_size set to 64 bytes [ 0.518629] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff] [ 0.518630] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff] [ 0.518631] e820: reserve RAM buffer [mem 0xb88ff000-0xbbffffff] [ 0.518632] e820: reserve RAM buffer [mem 0xb9f71000-0xbbffffff] [ 0.518633] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff] [ 0.518634] e820: reserve RAM buffer [mem 0x23ee00000-0x23fffffff] [ 0.520987] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.520994] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.524404] clocksource: Switched to clocksource tsc-early [ 0.535249] VFS: Disk quotas dquot_6.6.0 [ 0.535265] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.535333] pnp: PnP ACPI init [ 0.535584] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.535586] system 00:00: [mem 0xfed10000-0xfed17fff] could not be reserved [ 0.535588] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.535589] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.535590] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved [ 0.535592] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.535593] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved [ 0.535594] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.535596] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.535602] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.535773] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.535849] system 00:02: [io 0x0200-0x027f] has been reserved [ 0.535850] system 00:02: [io 0x1000-0x100f] has been reserved [ 0.535852] system 00:02: [io 0xffff] has been reserved [ 0.535853] system 00:02: [io 0xffff] has been reserved [ 0.535854] system 00:02: [io 0x0400-0x047f] has been reserved [ 0.535855] system 00:02: [io 0x0500-0x057f] has been reserved [ 0.535857] system 00:02: [io 0xef80-0xef9f] has been reserved [ 0.535861] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.535881] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.536455] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active) [ 0.536957] pnp 00:05: [dma 0 disabled] [ 0.537022] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active) [ 0.537043] pnp 00:06: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active) [ 0.537061] pnp 00:07: Plug and Play ACPI device, IDs SYN018e SYN0100 SYN0002 PNP0f13 (active) [ 0.537436] system 00:08: [mem 0x20000000-0x201fffff] has been reserved [ 0.537437] system 00:08: [mem 0x40004000-0x40004fff] has been reserved [ 0.537441] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.537748] pnp: PnP ACPI: found 9 devices [ 0.543392] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.543453] NET: Registered protocol family 2 [ 0.543540] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.544680] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.544723] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.544867] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear) [ 0.544947] TCP: Hash tables configured (established 65536 bind 65536) [ 0.545007] MPTCP token hash table entries: 8192 (order: 5, 196608 bytes, linear) [ 0.545052] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.545075] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.545231] NET: Registered protocol family 1 [ 0.545236] NET: Registered protocol family 44 [ 0.545243] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window [ 0.545249] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000 [ 0.545263] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.545266] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.545272] pci 0000:00:1c.0: bridge window [mem 0xd4600000-0xd46fffff] [ 0.545280] pci 0000:00:1c.1: PCI bridge to [bus 02-22] [ 0.545283] pci 0000:00:1c.1: bridge window [io 0x2000-0x3fff] [ 0.545287] pci 0000:00:1c.1: bridge window [mem 0xd0000000-0xd3ffffff] [ 0.545291] pci 0000:00:1c.1: bridge window [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.545298] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref] [ 0.545300] pci 0000:00:1c.2: PCI bridge to [bus 23] [ 0.545305] pci 0000:00:1c.2: bridge window [mem 0xd4500000-0xd45fffff] [ 0.545313] pci 0000:00:1c.3: PCI bridge to [bus 24] [ 0.545318] pci 0000:00:1c.3: bridge window [mem 0xd4400000-0xd44fffff] [ 0.545326] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.545327] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.545329] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.545330] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window] [ 0.545331] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window] [ 0.545332] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window] [ 0.545333] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff] [ 0.545334] pci_bus 0000:02: resource 0 [io 0x2000-0x3fff] [ 0.545335] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff] [ 0.545337] pci_bus 0000:02: resource 2 [mem 0xbf200000-0xbf3fffff 64bit pref] [ 0.545338] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff] [ 0.545339] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff] [ 0.545462] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.545471] pci 0000:00:14.0: enabling device (0000 -> 0002) [ 0.545665] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.545666] pci 0000:00:14.0: PCI INT A: no GSI [ 0.546483] PCI: CLS 64 bytes, default 64 [ 0.546530] Trying to unpack rootfs image as initramfs... [ 0.668127] Freeing initrd memory: 12720K [ 0.668182] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.668184] software IO TLB: mapped [mem 0x00000000b48ff000-0x00000000b88ff000] (64MB) [ 0.668578] check: Scanning for low memory corruption every 60 seconds [ 0.668855] Initialise system trusted keyrings [ 0.668864] Key type blacklist registered [ 0.668914] workingset: timestamp_bits=41 max_order=21 bucket_order=0 [ 0.669925] zbud: loaded [ 0.681022] Key type asymmetric registered [ 0.681024] Asymmetric key parser 'x509' registered [ 0.681030] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) [ 0.681065] io scheduler mq-deadline registered [ 0.681066] io scheduler kyber registered [ 0.681087] io scheduler bfq registered [ 0.681158] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 0.681547] pcieport 0000:00:1c.0: PME: Signaling with IRQ 26 [ 0.681844] pcieport 0000:00:1c.1: PME: Signaling with IRQ 27 [ 0.681870] pcieport 0000:00:1c.1: pciehp: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ IbPresDis- LLActRep+ [ 0.682191] pcieport 0000:00:1c.2: PME: Signaling with IRQ 28 [ 0.682483] pcieport 0000:00:1c.3: PME: Signaling with IRQ 29 [ 0.682558] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 0.682583] vesafb: mode is 1920x1080x32, linelength=7680, pages=0 [ 0.682584] vesafb: scrolling: redraw [ 0.682586] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 0.682601] vesafb: framebuffer at 0xc0000000, mapped to 0x00000000bf18e6b6, using 8128k, total 8128k [ 0.682632] fbcon: Deferring console take-over [ 0.682634] fb0: VESA VGA frame buffer device [ 0.682647] intel_idle: MWAIT substates: 0x21120 [ 0.682648] intel_idle: v0.5.1 model 0x3A [ 0.682817] intel_idle: Local APIC timer is reliable in all C-states [ 0.683059] ACPI: AC Adapter [AC] (on-line) [ 0.683115] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0 [ 0.683133] ACPI: Sleep Button [SLPB] [ 0.683159] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 0.683173] ACPI: Lid Switch [LID] [ 0.683201] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.686722] ACPI: Power Button [PWRF] [ 0.711447] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.711449] ACPI: Thermal Zone [CPUZ] (51 C) [ 0.735500] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.735502] ACPI: Thermal Zone [GFXZ] (0 C) [ 0.750452] thermal LNXTHERM:02: registered as thermal_zone2 [ 0.750454] ACPI: Thermal Zone [EXTZ] (31 C) [ 0.765520] thermal LNXTHERM:03: registered as thermal_zone3 [ 0.765522] ACPI: Thermal Zone [LOCZ] (31 C) [ 0.780566] thermal LNXTHERM:04: registered as thermal_zone4 [ 0.780568] ACPI: Thermal Zone [BATZ] (20 C) [ 0.781068] thermal LNXTHERM:05: registered as thermal_zone5 [ 0.781069] ACPI: Thermal Zone [PCHZ] (127 C) [ 0.781235] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.781439] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 0.783946] 0000:00:16.3: ttyS4 at I/O 0x4090 (irq = 17, base_baud = 115200) is a 16550A [ 0.784241] Non-volatile memory driver v1.3 [ 0.784242] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug. [ 0.784757] ahci 0000:00:1f.2: version 3.0 [ 0.785002] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 0.796755] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode [ 0.796758] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst [ 0.832885] battery: ACPI: Battery Slot [BAT0] (battery present) [ 0.832987] battery: ACPI: Battery Slot [BAT1] (battery absent) [ 0.837262] scsi host0: ahci [ 0.837561] scsi host1: ahci [ 0.837770] scsi host2: ahci [ 0.837887] scsi host3: ahci [ 0.837979] scsi host4: ahci [ 0.838063] scsi host5: ahci [ 0.838099] ata1: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737100 irq 30 [ 0.838102] ata2: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737180 irq 30 [ 0.838102] ata3: DUMMY [ 0.838105] ata4: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737280 irq 30 [ 0.838107] ata5: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737300 irq 30 [ 0.838110] ata6: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737380 irq 30 [ 0.838145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.838152] ehci-pci: EHCI PCI platform driver [ 0.838389] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.838396] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.838410] ehci-pci 0000:00:1a.0: debug port 2 [ 0.842306] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.842320] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4739000 [ 0.853391] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.853444] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 0.853446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.853447] usb usb1: Product: EHCI Host Controller [ 0.853448] usb usb1: Manufacturer: Linux 5.10.84-1-MANJARO ehci_hcd [ 0.853449] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.853623] hub 1-0:1.0: USB hub found [ 0.853632] hub 1-0:1.0: 3 ports detected [ 0.853996] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.854001] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.854015] ehci-pci 0000:00:1d.0: debug port 2 [ 0.857929] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.857933] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4738000 [ 0.873393] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.873434] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 0.873436] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.873437] usb usb2: Product: EHCI Host Controller [ 0.873438] usb usb2: Manufacturer: Linux 5.10.84-1-MANJARO ehci_hcd [ 0.873439] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.873625] hub 2-0:1.0: USB hub found [ 0.873634] hub 2-0:1.0: 3 ports detected [ 0.873799] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.873803] ohci-pci: OHCI PCI platform driver [ 0.873810] uhci_hcd: USB Universal Host Controller Interface driver [ 0.873843] usbcore: registered new interface driver usbserial_generic [ 0.873848] usbserial: USB Serial support registered for generic [ 0.873879] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 0.875774] i8042: Detected active multiplexing controller, rev 1.1 [ 0.876536] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.876563] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 0.876579] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 0.876595] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 0.876610] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 0.876947] rtc_cmos 00:03: RTC can wake from S4 [ 0.877211] rtc_cmos 00:03: registered as rtc0 [ 0.877265] rtc_cmos 00:03: setting system clock to 2021-12-28T15:05:54 UTC (1640703954) [ 0.877280] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.877322] intel_pstate: Intel P-state driver initializing [ 0.877694] ledtrig-cpu: registered to indicate activity on CPUs [ 0.877824] hid: raw HID events driver (C) Jiri Kosina [ 0.877883] ashmem: initialized [ 0.877957] drop_monitor: Initializing network drop monitor service [ 0.878013] Initializing XFRM netlink socket [ 0.878085] NET: Registered protocol family 10 [ 0.882925] Segment Routing with IPv6 [ 0.882927] RPL Segment Routing with IPv6 [ 0.882964] NET: Registered protocol family 17 [ 0.883172] microcode: sig=0x306a9, pf=0x10, revision=0x21 [ 0.883184] microcode: Microcode Update Driver: v2.2. [ 0.883188] IPI shorthand broadcast: enabled [ 0.883195] sched_clock: Marking stable (903101590, -19992873)->(890673866, -7565149) [ 0.883269] registered taskstats version 1 [ 0.883281] Loading compiled-in X.509 certificates [ 0.886053] Loaded X.509 cert 'Build time autogenerated kernel key: 25c3f82ea3ebf755b7dd47a9b85c7dce3bd7fdf5' [ 0.886626] zswap: loaded using pool zstd/z3fold [ 0.886811] Key type ._fscrypt registered [ 0.886812] Key type .fscrypt registered [ 0.886813] Key type fscrypt-provisioning registered [ 0.887175] PM: Magic number: 1:247:84 [ 0.887319] RAS: Correctable Errors collector initialized. [ 0.900882] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 1.103381] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 1.123381] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.153383] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.154333] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.154596] ata1.00: ATA-10: ADATA SU800, P1021A, max UDMA/133 [ 1.154598] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 32), AA [ 1.155302] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.155600] ata1.00: configured for UDMA/133 [ 1.155818] scsi 0:0:0:0: Direct-Access ATA ADATA SU800 1A PQ: 0 ANSI: 5 [ 1.156230] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [ 1.156243] sd 0:0:0:0: [sda] Write Protect is off [ 1.156245] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.156263] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.157238] sda: sda1 sda2 sda3 sda4 [ 1.180181] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.250548] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.250553] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.250989] hub 1-1:1.0: USB hub found [ 1.251167] hub 1-1:1.0: 6 ports detected [ 1.270552] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00 [ 1.270557] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.270991] hub 2-1:1.0: USB hub found [ 1.271170] hub 2-1:1.0: 8 ports detected [ 1.469919] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.472462] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.472470] ata2.00: ATAPI: hp CDDVDW SN-208DB, HH01, max UDMA/100 [ 1.475268] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) [ 1.475278] ata2.00: configured for UDMA/100 [ 1.488213] scsi 1:0:0:0: CD-ROM hp CDDVDW SN-208DB HH01 PQ: 0 ANSI: 5 [ 1.530040] usb 1-1.1: new full-speed USB device number 3 using ehci-pci [ 1.550040] usb 2-1.6: new full-speed USB device number 3 using ehci-pci [ 1.628351] random: fast init done [ 1.628385] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d, bcdDevice= 1.04 [ 1.628389] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1 [ 1.628391] usb 1-1.1: SerialNumber: 0030244f2491 [ 1.650474] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1, bcdDevice= 1.12 [ 1.650479] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.650481] usb 2-1.6: Product: BCM20702A0 [ 1.650497] usb 2-1.6: Manufacturer: Broadcom Corp [ 1.650498] usb 2-1.6: SerialNumber: 8056F2CF14D5 [ 1.686716] tsc: Refined TSC clocksource calibration: 2594.106 MHz [ 1.686730] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x25647bfab01, max_idle_ns: 440795211785 ns [ 1.686791] clocksource: Switched to clocksource tsc [ 1.700044] usb 1-1.3: new high-speed USB device number 4 using ehci-pci [ 1.836617] ata4: SATA link down (SStatus 0 SControl 300) [ 1.934498] usb 1-1.3: New USB device found, idVendor=04f2, idProduct=b270, bcdDevice=57.50 [ 1.934503] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.934505] usb 1-1.3: Product: HP HD Webcam [Fixed] [ 1.934508] usb 1-1.3: Manufacturer: Chicony [ 2.149962] ata5: SATA link down (SStatus 0 SControl 300) [ 2.463325] ata6: SATA link down (SStatus 0 SControl 300) [ 2.475966] Freeing unused decrypted memory: 2036K [ 2.476507] Freeing unused kernel image (initmem) memory: 1740K [ 2.476582] Write protecting the kernel read-only data: 26624k [ 2.477578] Freeing unused kernel image (text/rodata gap) memory: 2036K [ 2.478044] Freeing unused kernel image (rodata/data gap) memory: 1072K [ 2.570506] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.570510] rodata_test: all tests were successful [ 2.570512] x86/mm: Checking user space page tables [ 2.616949] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.616954] Run /init as init process [ 2.616955] with arguments: [ 2.616956] /init [ 2.616956] with environment: [ 2.616957] HOME=/ [ 2.616958] TERM=linux [ 2.616958] BOOT_IMAGE=/vmlinuz-5.10-x86_64 [ 2.717288] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 2.717291] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 2.717325] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.717333] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.718400] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930 [ 2.718407] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 2.718556] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [ 2.718557] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.718558] usb usb3: Product: xHCI Host Controller [ 2.718559] usb usb3: Manufacturer: Linux 5.10.84-1-MANJARO xhci-hcd [ 2.718560] usb usb3: SerialNumber: 0000:00:14.0 [ 2.718909] hub 3-0:1.0: USB hub found [ 2.718922] hub 3-0:1.0: 4 ports detected [ 2.719418] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.719421] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.719424] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.719457] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [ 2.719458] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.719459] usb usb4: Product: xHCI Host Controller [ 2.719459] usb usb4: Manufacturer: Linux 5.10.84-1-MANJARO xhci-hcd [ 2.719460] usb usb4: SerialNumber: 0000:00:14.0 [ 2.719538] hub 4-0:1.0: USB hub found [ 2.719547] hub 4-0:1.0: 4 ports detected [ 2.731154] sr 1:0:0:0: [sr0] scsi3-mmc drive: 62x/62x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.731157] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.735579] sdhci: Secure Digital Host Controller Interface driver [ 2.735582] sdhci: Copyright(c) Pierre Ossman [ 2.740113] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30) [ 2.740287] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes [ 2.740527] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA [ 2.740569] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30) [ 2.740654] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface. [ 2.780125] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.801343] raid6: skip pq benchmark and using algorithm sse2x4 [ 2.801345] raid6: using ssse3x2 recovery algorithm [ 2.802291] xor: automatically using best checksumming function avx [ 2.803411] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10 [ 2.843393] Btrfs loaded, crc32c=crc32c-intel [ 2.843976] BTRFS: device fsid 297fe75e-1e50-4e87-abe4-d41ecea2fc9a devid 1 transid 392653 /dev/sda4 scanned by systemd-udevd (153) [ 2.844141] BTRFS: device fsid 7f67cdbb-f0fe-4683-bbde-105f8e434d02 devid 1 transid 798465 /dev/sda3 scanned by systemd-udevd (161) [ 2.888143] BTRFS info (device sda3): flagging fs with big metadata feature [ 2.888151] BTRFS info (device sda3): disk space caching is enabled [ 2.888153] BTRFS info (device sda3): has skinny extents [ 2.898631] BTRFS info (device sda3): enabling ssd optimizations [ 2.966712] usb 3-1: new high-speed USB device number 2 using xhci_hcd [ 3.106994] usb 3-1: New USB device found, idVendor=0424, idProduct=5434, bcdDevice=30.82 [ 3.106998] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.107560] hub 3-1:1.0: USB hub found [ 3.107592] hub 3-1:1.0: 4 ports detected [ 3.110127] systemd[1]: systemd 249.7-2-manjaro running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified) [ 3.126798] systemd[1]: Detected architecture x86-64. [ 3.127712] systemd[1]: Hostname set to . [ 3.230096] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [ 3.247194] usb 4-1: New USB device found, idVendor=0424, idProduct=5434, bcdDevice=30.82 [ 3.247197] usb 4-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 3.247198] usb 4-1: Product: USB5534 [ 3.247199] usb 4-1: Manufacturer: SMSC [ 3.247200] usb 4-1: SerialNumber: 1239567 [ 3.247810] hub 4-1:1.0: USB hub found [ 3.248325] hub 4-1:1.0: 4 ports detected [ 3.257518] random: lvmconfig: uninitialized urandom read (4 bytes read) [ 3.316798] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400 [ 3.370051] usb 3-4: new full-speed USB device number 3 using xhci_hcd [ 3.437454] systemd[1]: /usr/lib/systemd/system/teamviewerd.service:9: PIDFile= references a path below legacy directory /var/run/, updating /var/run/teamviewerd.pid → /run/teamviewerd.pid; please update the unit file accordingly. [ 3.441446] systemd[1]: /etc/systemd/system/omkd.service:17: PIDFile= references a path below legacy directory /var/run/, updating /var/run/opmantek.exe.pid → /run/opmantek.exe.pid; please update the unit file accordingly. [ 3.444390] systemd[1]: Configuration file /etc/systemd/system/gunicorn.service is marked executable. Please remove executable permission bits. Proceeding anyway. [ 3.444397] systemd[1]: Configuration file /etc/systemd/system/gunicorn.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway. [ 3.444508] systemd[1]: /etc/systemd/system/gunicorn.service:14: RuntimeDirectory= path is absolute, ignoring: /var/www/nettemp/venv/bin/ [ 3.446701] systemd[1]: Queued start job for default target Graphical Interface. [ 3.448615] systemd[1]: Created slice Slice /system/getty. [ 3.449154] systemd[1]: Created slice Slice /system/maia-console. [ 3.449699] systemd[1]: Created slice Slice /system/modprobe. [ 3.450147] systemd[1]: Created slice Slice /system/systemd-fsck. [ 3.450491] systemd[1]: Created slice User and Session Slice. [ 3.450618] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.450719] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 3.450976] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 3.451046] systemd[1]: Reached target Local Encrypted Volumes. [ 3.451076] systemd[1]: Reached target Login Prompts. [ 3.451124] systemd[1]: Reached target Remote File Systems. [ 3.451146] systemd[1]: Reached target Slice Units. [ 3.451179] systemd[1]: Reached target Swaps. [ 3.451207] systemd[1]: Reached target Local Verity Protected Volumes. [ 3.451326] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 3.451939] systemd[1]: Listening on LVM2 poll daemon socket. [ 3.453644] systemd[1]: Listening on Process Core Dump Socket. [ 3.453927] systemd[1]: Listening on Journal Audit Socket. [ 3.454089] systemd[1]: Listening on Journal Socket (/dev/log). [ 3.454273] systemd[1]: Listening on Journal Socket. [ 3.454888] systemd[1]: Listening on udev Control Socket. [ 3.455034] systemd[1]: Listening on udev Kernel Socket. [ 3.456274] systemd[1]: Mounting Huge Pages File System... [ 3.457335] systemd[1]: Mounting POSIX Message Queue File System... [ 3.458347] systemd[1]: Mounting Kernel Debug File System... [ 3.459530] systemd[1]: Mounting Kernel Trace File System... [ 3.460986] systemd[1]: Starting Create List of Static Device Nodes... [ 3.462182] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 3.463401] systemd[1]: Starting Load Kernel Module configfs... [ 3.464692] systemd[1]: Starting Load Kernel Module drm... [ 3.465907] systemd[1]: Starting Load Kernel Module fuse... [ 3.466190] random: lvm: uninitialized urandom read (4 bytes read) [ 3.466934] systemd[1]: Starting Set Up Additional Binary Formats... [ 3.467033] systemd[1]: Condition check resulted in File System Check on Root Device being skipped. [ 3.469446] systemd[1]: Starting Journal Service... [ 3.473085] systemd[1]: Starting Load Kernel Modules... [ 3.474315] systemd[1]: Starting Remount Root and Kernel File Systems... [ 3.474434] systemd[1]: Condition check resulted in Repartition Root Disk being skipped. [ 3.475014] Linux agpgart interface v0.103 [ 3.475678] systemd[1]: Starting Coldplug All udev Devices... [ 3.478109] systemd[1]: Mounted Huge Pages File System. [ 3.478243] systemd[1]: Mounted POSIX Message Queue File System. [ 3.478360] systemd[1]: Mounted Kernel Debug File System. [ 3.478471] systemd[1]: Mounted Kernel Trace File System. [ 3.478811] systemd[1]: Finished Create List of Static Device Nodes. [ 3.479151] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 3.479391] systemd[1]: Finished Load Kernel Module configfs. [ 3.479540] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 238 (systemd-binfmt) [ 3.480593] systemd[1]: Mounting Arbitrary Executable File Formats File System... [ 3.482633] systemd[1]: Mounting Kernel Configuration File System... [ 3.483653] systemd[1]: Mounted Arbitrary Executable File Formats File System. [ 3.493639] systemd[1]: Finished Set Up Additional Binary Formats. [ 3.493710] audit: type=1130 audit(1640703957.112:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-binfmt comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.493954] systemd[1]: Mounted Kernel Configuration File System. [ 3.498120] fuse: init (API version 7.32) [ 3.507572] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 3.507859] systemd[1]: Finished Load Kernel Module fuse. [ 3.507952] audit: type=1130 audit(1640703957.126:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.507956] audit: type=1131 audit(1640703957.126:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@fuse comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.520623] systemd[1]: Mounting FUSE Control File System... [ 3.521137] usb 3-4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54 [ 3.521140] usb 3-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 3.521142] usb 3-4: Product: USB2.0-Serial [ 3.527870] systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling. [ 3.527927] audit: type=1130 audit(1640703957.146:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.529581] systemd[1]: Mounted FUSE Control File System. [ 3.530775] BTRFS info (device sda3): use zstd compression, level 3 [ 3.530779] BTRFS info (device sda3): disk space caching is enabled [ 3.533870] systemd[1]: Finished Remount Root and Kernel File Systems. [ 3.534074] systemd[1]: Condition check resulted in First Boot Wizard being skipped. [ 3.534197] audit: type=1130 audit(1640703957.152:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.535431] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. [ 3.536554] systemd[1]: Starting Load/Save Random Seed... [ 3.537735] systemd[1]: Starting Create System Users... [ 3.540133] systemd[1]: Finished Load Kernel Modules. [ 3.540206] audit: type=1130 audit(1640703957.159:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.546660] systemd[1]: Starting Apply Kernel Variables... [ 3.560554] systemd[1]: Finished Apply Kernel Variables. [ 3.560620] audit: type=1130 audit(1640703957.179:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.563005] systemd[1]: Starting CLI Netfilter Manager... [ 3.568620] systemd[1]: Finished Create System Users. [ 3.568748] audit: type=1130 audit(1640703957.186:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.569603] systemd[1]: Starting Create Static Device Nodes in /dev... [ 3.571855] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 3.572058] systemd[1]: Finished Load Kernel Module drm. [ 3.572112] audit: type=1130 audit(1640703957.189:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=modprobe@drm comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 3.573789] systemd[1]: Started Journal Service. [ 3.583157] systemd-journald[239]: Received client request to flush runtime journal. [ 3.593374] usb 3-1.3: new low-speed USB device number 4 using xhci_hcd [ 3.692303] usb 3-1.3: New USB device found, idVendor=03f0, idProduct=0024, bcdDevice= 3.00 [ 3.692310] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.692313] usb 3-1.3: Product: HP Basic USB Keyboard [ 3.692315] usb 3-1.3: Manufacturer: CHICONY [ 3.720462] loop: module loaded [ 3.770053] usb 3-1.4: new low-speed USB device number 5 using xhci_hcd [ 3.812124] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 3.864270] usb 3-1.4: New USB device found, idVendor=093a, idProduct=2510, bcdDevice= 1.00 [ 3.864277] usb 3-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.864279] usb 3-1.4: Product: USB Optical Mouse [ 3.864282] usb 3-1.4: Manufacturer: PixArt [ 4.109138] input: HP Wireless hotkeys as /devices/virtual/input/input8 [ 4.133821] hp_accel: hardware type HPB64xx found [ 4.134526] lis3lv02d: 8 bits 3DC sensor found [ 4.176776] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input9 [ 4.255619] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20200925/utaddress-204) [ 4.255628] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.255631] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 4.255636] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.255638] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 4.255642] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.255643] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20200925/utaddress-204) [ 4.255647] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 4.255648] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 4.256725] parport_pc 00:05: reported by Plug and Play ACPI [ 4.256803] parport0: PC-style at 0x378 (0x778), irq 5, using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP] [ 4.275995] e1000e: Intel(R) PRO/1000 Network Driver [ 4.275998] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 4.276400] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 4.294835] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16) [ 4.358514] tpm tpm0: TPM is disabled/deactivated (0x7) [ 4.373685] input: PC Speaker as /devices/platform/pcspkr/input/input11 [ 4.480334] BTRFS info (device sda4): flagging fs with big metadata feature [ 4.480340] BTRFS info (device sda4): enabling ssd optimizations [ 4.480344] BTRFS info (device sda4): use zstd compression, level 3 [ 4.480346] BTRFS info (device sda4): disk space caching is enabled [ 4.480348] BTRFS info (device sda4): has skinny extents [ 4.499579] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock [ 4.502016] random: tlp-readconfs: uninitialized urandom read (4 bytes read) [ 4.502043] random: tlp-readconfs: uninitialized urandom read (4 bytes read) [ 4.521442] resource sanity check: requesting [mem 0xfed10000-0xfed15fff], which spans more than Reserved [mem 0xfed10000-0xfed13fff] [ 4.521455] caller snb_uncore_imc_init_box+0x78/0xc0 [intel_uncore] mapping multiple BARs [ 4.523798] random: tlp-readconfs: uninitialized urandom read (4 bytes read) [ 4.618370] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) a0:d3:c1:9d:47:f3 [ 4.618384] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection [ 4.618426] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF [ 4.657986] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 4.690060] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer [ 4.690063] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules [ 4.690064] RAPL PMU: hw unit of domain package 2^-16 Joules [ 4.690066] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules [ 4.697606] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 4.757863] cryptd: max_cpu_qlen set to 1000 [ 4.814971] iTCO_vendor_support: vendor-support=0 [ 4.884209] AVX version of gcm_enc/dec engaged. [ 4.884212] AES CTR mode by8 optimization enabled [ 4.923201] e1000e 0000:00:19.0 enp0s25: renamed from eth0 [ 4.946129] ppdev: user-space parallel port driver [ 4.956322] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 4.956378] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460) [ 4.956409] Intel(R) Wireless WiFi driver for Linux [ 4.956764] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 4.962600] iwlwifi 0000:24:00.0: can't disable ASPM; OS doesn't have ASPM control [ 4.963053] checking generic (c0000000 7f0000) vs hw (d4000000 400000) [ 4.963055] checking generic (c0000000 7f0000) vs hw (c0000000 10000000) [ 4.963056] fb0: switching to inteldrmfb from VESA VGA [ 4.970142] iwlwifi 0000:24:00.0: loaded firmware version 18.168.6.1 6000g2a-6.ucode op_mode iwldvm [ 4.970160] i915 0000:00:02.0: vgaarb: deactivate vga console [ 4.973151] input: HP WMI hotkeys as /devices/virtual/input/input12 [ 5.006953] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 5.043320] [drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on minor 0 [ 5.045650] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 5.046145] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13 [ 5.074203] fbcon: i915drmfb (fb0) is primary device [ 5.074205] fbcon: Deferring console take-over [ 5.074209] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device [ 5.104938] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 5.104942] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 5.104943] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 5.104946] iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0 [ 5.139402] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 5.150431] iwlwifi 0000:24:00.0 wlo1: renamed from wlan0 [ 5.157295] kauditd_printk_skb: 16 callbacks suppressed [ 5.157297] audit: type=1130 audit(1640703958.776:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 5.232586] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) [ 5.235072] audit: type=1130 audit(1640703958.852:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:intel_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 5.280677] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line [ 5.280681] snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0) [ 5.280683] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 5.280684] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 5.280686] snd_hda_codec_idt hdaudioC0D0: inputs: [ 5.280687] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 5.280689] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 5.280691] snd_hda_codec_idt hdaudioC0D0: Line=0xf [ 5.300029] random: crng init done [ 5.306660] audit: type=1130 audit(1640703958.922:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 5.339258] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input10 [ 5.340433] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14 [ 5.340733] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15 [ 5.340863] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16 [ 5.340997] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17 [ 5.341102] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18 [ 5.341219] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19 [ 5.341336] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20 [ 5.354634] mousedev: PS/2 mouse device common for all mice [ 5.378212] intel_rapl_common: Found RAPL domain package [ 5.378216] intel_rapl_common: Found RAPL domain core [ 5.378217] intel_rapl_common: Found RAPL domain uncore [ 5.447843] usbcore: registered new interface driver ch341 [ 5.447859] usbserial: USB Serial support registered for ch341-uart [ 5.447881] ch341 3-4:1.0: ch341-uart converter detected [ 5.448291] usb 3-4: ch341-uart converter now attached to ttyUSB0 [ 6.164657] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916] [ 6.234256] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122 [ 6.280638] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input23 [ 6.671570] mc: Linux media interface: v0.10 [ 6.697513] videodev: Linux video capture interface: v2.00 [ 6.782937] Bluetooth: Core ver 2.22 [ 6.782974] NET: Registered protocol family 31 [ 6.782976] Bluetooth: HCI device and connection manager initialized [ 6.782981] Bluetooth: HCI socket layer initialized [ 6.782984] Bluetooth: L2CAP socket layer initialized [ 6.782990] Bluetooth: SCO socket layer initialized [ 6.804462] usbcore: registered new interface driver btusb [ 6.868599] uvcvideo: Found UVC 1.00 device HP HD Webcam [Fixed] (04f2:b270) [ 6.929421] input: HP HD Webcam [Fixed]: HP HD Web as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input24 [ 6.929574] usbcore: registered new interface driver uvcvideo [ 6.929576] USB Video Class driver (1.1.1) [ 7.396544] input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.3/3-1.3:1.0/0003:03F0:0024.0001/input/input25 [ 7.450322] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:14.0-1.3/input0 [ 7.451904] input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1.4/3-1.4:1.0/0003:093A:2510.0002/input/input26 [ 7.451992] hid-generic 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:14.0-1.4/input0 [ 7.452023] usbcore: registered new interface driver usbhid [ 7.452024] usbhid: USB HID core driver [ 10.588117] audit: type=1130 audit(1640703964.206:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.595099] audit: type=1130 audit(1640703964.212:31): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.615776] audit: type=1130 audit(1640703964.232:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=cronie comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.619352] audit: type=1130 audit(1640703964.236:33): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.632601] audit: type=1334 audit(1640703964.249:34): prog-id=9 op=LOAD [ 10.632748] audit: type=1334 audit(1640703964.249:35): prog-id=10 op=LOAD [ 10.632811] audit: type=1334 audit(1640703964.249:36): prog-id=11 op=LOAD [ 10.635439] audit: type=1130 audit(1640703964.252:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=alsa-restore comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.640712] audit: type=1130 audit(1640703964.252:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty-device@sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.640720] audit: type=1130 audit(1640703964.252:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=maia-console@tty1 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 10.681285] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 10.681288] Bluetooth: BNEP filters: protocol multicast [ 10.681293] Bluetooth: BNEP socket layer initialized [ 10.726121] NET: Registered protocol family 38 [ 10.733201] fbcon: Taking over console [ 10.749083] Console: switching to colour frame buffer device 240x67 [ 10.932692] usb 3-4: usbfs: interface 0 claimed by ch341 while 'brltty' sets config #1 [ 10.935134] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [ 10.935158] ch341 3-4:1.0: device disconnected [ 11.282363] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 11.579353] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 11.688601] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 11.986014] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 12.076453] input: BRLTTY 6.4 Linux Screen Driver Keyboard as /devices/virtual/input/input27 [ 12.792825] e1000e 0000:00:19.0 enp0s25: NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx [ 12.792828] e1000e 0000:00:19.0 enp0s25: 10/100 speed: disabling TSO [ 12.793363] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s25: link becomes ready [ 15.305079] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 15.613794] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 15.807185] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 16.113755] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0 [ 16.201395] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready [ 16.236260] kauditd_printk_skb: 37 callbacks suppressed [ 16.236262] audit: type=1325 audit(1640703969.852:77): table=nat family=2 entries=0 op=xt_register pid=1159 comm="modprobe" [ 16.301980] audit: type=1325 audit(1640703969.919:78): table=nat family=2 entries=5 op=xt_replace pid=1166 comm="iptables" [ 16.307087] audit: type=1325 audit(1640703969.922:79): table=filter family=2 entries=0 op=xt_register pid=1170 comm="modprobe" [ 16.307458] audit: type=1325 audit(1640703969.926:80): table=filter family=2 entries=4 op=xt_replace pid=1169 comm="iptables" [ 16.318491] audit: type=1325 audit(1640703969.936:81): table=filter family=2 entries=6 op=xt_replace pid=1171 comm="iptables" [ 16.322031] audit: type=1325 audit(1640703969.939:82): table=filter family=2 entries=7 op=xt_replace pid=1173 comm="iptables" [ 16.325433] audit: type=1325 audit(1640703969.942:83): table=filter family=2 entries=8 op=xt_replace pid=1174 comm="iptables" [ 16.328852] audit: type=1325 audit(1640703969.946:84): table=filter family=2 entries=9 op=xt_replace pid=1175 comm="iptables" [ 16.331428] audit: type=1325 audit(1640703969.949:85): table=filter family=2 entries=10 op=xt_replace pid=1176 comm="iptables" [ 16.342553] audit: type=1325 audit(1640703969.959:86): table=filter family=2 entries=12 op=xt_replace pid=1177 comm="iptables" [ 21.539938] kauditd_printk_skb: 37 callbacks suppressed [ 21.539940] audit: type=1130 audit(1640703975.156:124): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 21.702694] audit: type=1105 audit(1640703975.319:125): pid=1590 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/pkexec" hostname=? addr=? terminal=? res=success' [ 22.441908] UDF-fs: INFO Mounting volume 'Divadlo Milicin2021', timestamp 2021/10/10 15:00 (1000) [ 23.262356] audit: type=1130 audit(1640703976.879:126): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=pcscd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 29.762150] audit: type=1131 audit(1640703983.379:127): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@973 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 29.773867] audit: type=1131 audit(1640703983.392:128): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@973 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 40.921514] audit: type=1131 audit(1640703994.539:129): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 41.045323] audit: type=1334 audit(1640703994.662:130): prog-id=14 op=UNLOAD [ 41.045344] audit: type=1334 audit(1640703994.662:131): prog-id=13 op=UNLOAD [ 41.045348] audit: type=1334 audit(1640703994.662:132): prog-id=12 op=UNLOAD [ 223.592925] usb 3-4: USB disconnect, device number 3 [ 223.742206] audit: type=1131 audit(1640704177.359:133): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty-device@sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 223.865674] audit: type=1131 audit(1640704177.482:134): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty@-sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 304.810028] usb 3-3: new full-speed USB device number 6 using xhci_hcd [ 304.950902] usb 3-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.63 [ 304.950906] usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 304.950908] usb 3-3: Product: USB2.0-Serial [ 304.951531] ch341 3-3:1.0: ch341-uart converter detected [ 304.951893] usb 3-3: ch341-uart converter now attached to ttyUSB0 [ 305.543784] audit: type=1130 audit(1640704259.159:135): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty-device@sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 305.595232] audit: type=1130 audit(1640704259.212:136): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty@-sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 305.599507] usb 3-3: usbfs: interface 0 claimed by ch341 while 'brltty' sets config #1 [ 305.601495] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [ 305.601691] ch341 3-3:1.0: device disconnected [ 306.743507] input: BRLTTY 6.4 Linux Screen Driver Keyboard as /devices/virtual/input/input28 [ 324.852007] usb 3-3: USB disconnect, device number 6 [ 324.999266] audit: type=1131 audit(1640704278.616:137): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty-device@sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 325.089987] audit: type=1131 audit(1640704278.709:138): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty@-sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 326.826707] usb 3-4: new full-speed USB device number 7 using xhci_hcd [ 326.967623] usb 3-4: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.63 [ 326.967626] usb 3-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 326.967628] usb 3-4: Product: USB2.0-Serial [ 326.968382] ch341 3-4:1.0: ch341-uart converter detected [ 326.968829] usb 3-4: ch341-uart converter now attached to ttyUSB0 [ 327.562018] audit: type=1130 audit(1640704281.179:139): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty-device@sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 327.612933] audit: type=1130 audit(1640704281.229:140): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty@-sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 327.617896] usb 3-4: usbfs: interface 0 claimed by ch341 while 'brltty' sets config #1 [ 327.619600] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [ 327.619624] ch341 3-4:1.0: device disconnected [ 328.757812] input: BRLTTY 6.4 Linux Screen Driver Keyboard as /devices/virtual/input/input29 [ 333.958010] usb 3-4: USB disconnect, device number 7 [ 334.112522] audit: type=1131 audit(1640704287.729:141): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty-device@sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 334.262944] audit: type=1131 audit(1640704287.879:142): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty@-sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 443.316604] usb 3-3: new full-speed USB device number 8 using xhci_hcd [ 443.461001] usb 3-3: New USB device found, idVendor=1a86, idProduct=7523, bcdDevice= 2.54 [ 443.461007] usb 3-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 443.461010] usb 3-3: Product: USB2.0-Serial [ 443.461827] ch341 3-3:1.0: ch341-uart converter detected [ 443.462405] usb 3-3: ch341-uart converter now attached to ttyUSB0 [ 444.082306] audit: type=1130 audit(1640704397.699:143): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty-device@sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 444.129562] audit: type=1130 audit(1640704397.746:144): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=brltty@-sys-devices-pci0000:00-0000:00:14.0-usb3-3\x2d3 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 444.133182] usb 3-3: usbfs: interface 0 claimed by ch341 while 'brltty' sets config #1 [ 444.134885] ch341-uart ttyUSB0: ch341-uart converter now disconnected from ttyUSB0 [ 444.134909] ch341 3-3:1.0: device disconnected [ 445.273657] input: BRLTTY 6.4 Linux Screen Driver Keyboard as /devices/virtual/input/input30 [ 770.137807] audit: type=1100 audit(1640704723.756:145): pid=74362 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=? acct="admin" exe="/usr/bin/sshd" hostname=92.255.85.237 addr=92.255.85.237 terminal=ssh res=failed' [ 907.915100] audit: type=1130 audit(1640704861.532:146): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 907.915107] audit: type=1131 audit(1640704861.532:147): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ 1813.497197] audit: type=1101 audit(1640705767.116:148): pid=173370 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="bednicka" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1813.498194] audit: type=1110 audit(1640705767.116:149): pid=173370 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1813.499591] audit: type=1105 audit(1640705767.116:150): pid=173370 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1814.465282] audit: type=1106 audit(1640705768.082:151): pid=173370 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1814.465379] audit: type=1104 audit(1640705768.082:152): pid=173370 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1872.029138] audit: type=1100 audit(1640705825.646:153): pid=179002 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=? acct="nginx" exe="/usr/bin/sshd" hostname=92.255.85.237 addr=92.255.85.237 terminal=ssh res=failed' [ 1903.452735] audit: type=1101 audit(1640705857.069:154): pid=182033 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="bednicka" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1903.454061] audit: type=1110 audit(1640705857.072:155): pid=182033 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1903.455410] audit: type=1105 audit(1640705857.072:156): pid=182033 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1904.380777] audit: type=1106 audit(1640705857.999:157): pid=182033 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1904.380882] audit: type=1104 audit(1640705857.999:158): pid=182033 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1924.813750] audit: type=1101 audit(1640705878.432:159): pid=184070 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="bednicka" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1924.814606] audit: type=1110 audit(1640705878.432:160): pid=184070 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1924.815681] audit: type=1105 audit(1640705878.432:161): pid=184070 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1925.740339] audit: type=1106 audit(1640705879.359:162): pid=184070 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 1925.740434] audit: type=1104 audit(1640705879.359:163): pid=184070 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 2746.176043] audit: type=1100 audit(1640706699.796:164): pid=261562 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=? acct="suporte" exe="/usr/bin/sshd" hostname=92.255.85.37 addr=92.255.85.37 terminal=ssh res=failed' [ 2949.687132] audit: type=1100 audit(1640706903.306:165): pid=280811 uid=1000 auid=1000 ses=2 msg='op=PAM:unix_chkpwd acct="bednicka" exe="/usr/bin/unix_chkpwd" hostname=? addr=? terminal=? res=success' [ 3141.894110] audit: type=1100 audit(1640707095.513:166): pid=298930 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:authentication grantors=? acct="demo" exe="/usr/bin/sshd" hostname=92.255.85.237 addr=92.255.85.237 terminal=ssh res=failed' [ 3525.948957] audit: type=1101 audit(1640707479.566:167): pid=335698 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="bednicka" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 3525.950114] audit: type=1110 audit(1640707479.569:168): pid=335698 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 3525.951449] audit: type=1105 audit(1640707479.569:169): pid=335698 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 3525.977743] audit: type=1106 audit(1640707479.596:170): pid=335698 uid=1000 auid=1000 ses=2 msg='op=PAM:session_close grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 3525.977848] audit: type=1104 audit(1640707479.596:171): pid=335698 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 3557.256143] audit: type=1101 audit(1640707510.876:172): pid=338668 uid=1000 auid=1000 ses=2 msg='op=PAM:accounting grantors=pam_unix,pam_permit,pam_time acct="bednicka" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 3557.256956] audit: type=1110 audit(1640707510.876:173): pid=338668 uid=1000 auid=1000 ses=2 msg='op=PAM:setcred grantors=pam_faillock,pam_permit,pam_env,pam_faillock acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success' [ 3557.258872] audit: type=1105 audit(1640707510.876:174): pid=338668 uid=1000 auid=1000 ses=2 msg='op=PAM:session_open grantors=pam_limits,pam_unix,pam_permit acct="root" exe="/usr/bin/sudo" hostname=? addr=? terminal=/dev/pts/3 res=success'
# Device: 1A86:7523
# Baum [NLS eReader Zoomax (20 cells)]
# ENV{PRODUCT}=="1a86/7523/*", ENV{BRLTTY_BRAILLE_DRIVER}="bm", GOTO="brltty_usb_run"
a reloadnout udev:
udevadm control --reload-rules
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.
28.12.2021 18:03