Dotaz: XAWTV nefunguje na ATI TV WONDER PCI

[Yusho]

Zdravim a zaroven vas prosim o radu. Mam ATI TV WONDER PCI a XAWTV neako nechce vyhladat ziadne ziadne programy... tv kartu mi detekuje asi takto

i2c-core.o: i2c core module

Linux video capture interface: v1.00

i2c-algo-bit.o: i2c bit algorithm module

bttv: driver version 0.7.107 loaded

bttv: using 4 buffers with 2080k (8320k total) for capture

bttv: Host bridge is VIA Technologies, Inc. VT8377 [KT400

AGP] Host Bridge

bttv: Bt8xx card found (0).

bttv0: Bt878 (rev 17) at 00:0f.0, irq: 10, latency: 32,

mmio: 0xef000000

bttv0: detected: ATI TV Wonder [card=63], PCI subsystem ID

is 1002:0001

bttv0: using: BT878(ATI TV-Wonder) [card=63,autodetected]

i2c-core.o: adapter bt848 #0 registered as adapter 0.

bttv0: using tuner=19

bttv0: i2c: checking for MSP34xx @ 0x80... found

i2c-core.o: driver i2c msp3400 driver registered.

msp34xx: init: chip=MSP3410D-C5 +nicam +simple

msp3410: daemon started

i2c-core.o: client [MSP3410D-C5] registered to adapter

[bt848 #0](pos. 0).

bttv0: i2c: checking for TDA9875 @ 0xb0... not found

bttv0: i2c: checking for TDA7432 @ 0x8a... not found

i2c-core.o: driver i2c TV tuner driver registered.

tuner: chip found @ 0xc0

tuner: type set to 19 (Temic PAL* auto (4006 FN5))

i2c-core.o: client [Temic PAL* auto (4006 FN5)] registered to adapter [bt848 #0](pos. 1).

bttv0: PLL: 28636363 => 35468950 .. ok

bttv0: registered device video0

bttv0: registered device vbi0

a ked po nastarovani X spusti XAWTV s prikazom scans tak dosatanem asi takuto odpoved

xawtv scans

This is xawtv-3.90, running on Linux/i686 (2.4.22)

Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to type FontStruct

station "scans" not found

A ked spustim XAWTV len tak z ikony na vrchu okna mi najpri ukaze moje rozlisenie a potom ---- ??? --------

distribucia : Slackware 9.1

Odpovědi

[chalucha]

Neporadim sice cim to muze byt, ale mam presne tuto kartu i distribuci a pres XAWTV vse fungovalo na prvni pokus.
Co zkusit TVTIME?

[Yusho]

a ako si postupoval myslim instalacia. instaloval si neake nove bttv {0.9}, alebo to co je uz v kernely {0.7.}

[chalucha]

Nainstaloval sem jen holej slackware a do neho hned zkompiloval XawTV a fungovalo to okamzite a bez problemu.

[Yusho]

no xawtv mi neako nijak raz nechce fungovat, ale prefektne funguje tvtime... dakujem za rady

[wong]

ja mam taky TV Wonder a xawtv mne chodi bezproblemu. mam MDK9.2 (Cooker) ale nejsu ted doma, takze se nemuzu podivat na nastaveni