Dotaz: Ako rozbehat YAMAHA OPL3-SAX na MDK 9.2

[Andreas]

Vsetkych vas pozdravujem. Nemate niekto skusenosti z pouzivanim zvukovej karty YAMAHA OPL3-SAX pod linuxom? Momentalne pouzivam integrovanu zvukovu katu viaxxx na maticnej doske ktora funguje ako tak a ktoru MDK9.2 nasiel a priradil mu aj ovladace. Neskor som sa rozhodol pouzivat aj moju starsiu zvukovku tak som ju zasunul do slotu a spustil PC...linux ju vsak nedetekoval. Nieje ani v zozname pripojeneho hrdwaru. Detekuje ju aj BIOS a tak isto aj win98 ktory mam nainstalovany. Neviete niekto kde moze byt problem? Ako mozem tu zvukovku rozbehat? Mozem v linuxe pouzivat obe zvukovky naraz? Dakujem za odpovede.

Odpovědi

[Peter Golis]

mdk ma v sebe ovladace alsa, takze:
http://www.alsa-project.org/alsa-doc/doc-php/template.php?company=Yamaha&card=&chip=OPL3-SA3&module=opl3sa2
tipujem

[Andreas]

to znamená že ak ALSU obsahuje moje jadro nemusím ju už inštaloať alsa-driver, alsa-lib..? a mozem konfigurovat zvukovku pomoou alsaconf. Totiž ak spustim prikaz modprobe -v opl3sa2 tak zvukovka reaguj prasknutim ako keby sa zapla ale zvuk v X-kách ide len z druhej zvukovky. Mixer ma stale v ponuke len tu integrovanú zvukovku. Inak Vdaka

[Peter Golis]

MDK 9.2 by mal uz v sebe obsahovat alsu, ak sa nemylim . ak bola samonastavena zvukovka, tak sa tvari ako dalsia zvukova karta v systeme a mala by fungovat. co takto ukazat relevantny vypis z dmesg a nacitania modulu? mozno ma ta karta konflikt v nastaveni s inym hardware.

[Andreas]

Tak som sem hodil ten vypis dmesg. a vo vypise ju našiel
isapnp: Scanning for PnP cards...
isapnp: Card 'OPL3-SAX Sound Board'
isapnp: 1 Plug & Play card detected total
cely vypis je nizsie...

[jose17]

> Mozem v linuxe pouzivat obe zvukovky naraz?

zavisi aj na doske. ist to moze, no nemusi..

[Honza]

Tahle zvukovka je isa (alespon u me), takze pri rozchazeni alsy je nutne aby system o te zvukovce take vedel, cili pouzij nastroje z isapnptools (takhle se ten balik jmenuje v debianu, tak doufam ze v mdk to bude podobne) a to pnpdump a isapnp .

[Andreas]

TAK TU MÁM VÝPIS Z DMESG: (je toho trochu viac )

[root@localhost andrej]# dmesg
Linux version 2.4.22-10mdk (nplanel@no.mandrakesoft.com) (gcc version 3.3.1 (Mandrake Linux 9.2 3.3.1-2mdk)) #1 Thu Sep 18 12:30:58 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000008000000 (usable)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
128MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 32768
zone(0): 4096 pages.
zone(1): 28672 pages.
zone(2): 0 pages.
DMI not present.
ACPI: Unable to locate RSDP
Building zonelist for node : 0
Kernel command line: auto BOOT_IMAGE=linux ro root=305 devfs=mount acpi=ht resume=/dev/hda8 splash=silent
bootsplash: silent mode.
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 601.087 MHz processor.
Console: colour dummy device 80x25
Calibrating delay loop... 1199.30 BogoMIPS
Memory: 125732k/131072k available (1508k kernel code, 4952k reserved, -1961k data, 156k init, 0k highmem, 0k BadRAM)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: Common caps: 0183fbff c1c7fbff 00000000 00000000
CPU: AMD Duron(tm) Processor stepping 00
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 601.0616 MHz.
..... host bus clock speed is 200.3539 MHz.
cpu: 0, clocks: 2003539, slice: 1001769
CPU0< T0:2003536,T1:1001760,D:7,S:1001769,C:2003539 >
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030813
ACPI: Interpreter disabled.
PCI: PCI BIOS revision 2.10 entry at 0xfb380, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/0686] at 00:07.0
PCI: Disabling Via external APIC routing
isapnp: Scanning for PnP cards...
isapnp: Card 'OPL3-SAX Sound Board'
isapnp: 1 Plug & Play card detected total
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Starting kswapd
kinoded started
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
vesafb: framebuffer at 0xd0000000, mapped to 0xc8800000, size 1875k
vesafb: mode is 800x600x16, linelength=1600, pages=3
vesafb: protected mode interface info at c000:09d5
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... silenjpeg size 107888 bytes, found (800x600, 107840 bytes, v3).
Got silent jpeg.
Got silent jpeg.
Console: switching to colour frame buffer device 92x32
fb0: VESA VGA frame buffer device
pty: 1024 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686a (rev 1b) IDE UDMA66 controller on pci00:07.1
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 2F040J0, ATA DISK drive
blk: queue c0180d20, I/O limit 4095Mb (mask 0xffffffff)
hdc: CD-540E, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63, UDMA(66)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
ide: late registration of driver.
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
Resume Machine: This is normal swap space
Swsusp 1.0.3: kswsuspd starting
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 299k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 156k freed
Got silent jpeg.
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 12:42:04 Sep 18 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Found IRQ 5 for device 00:07.2
PCI: Sharing IRQ 5 with 00:07.3
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:07.3
PCI: Sharing IRQ 5 with 00:07.2
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Adding Swap: 506008k swap-space (priority -1)
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-2
MSDOS FS: Using codepage 852
MSDOS FS: IO charset iso8859-2
MSDOS FS: Using codepage 852
MSDOS FS: IO charset iso8859-2
MSDOS FS: Using codepage 852
inserting floppy driver for 2.4.22-10mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
hdc: attached ide-cdrom driver.
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
PCI: Found IRQ 10 for device 00:07.5
PCI: Setting latency timer of device 00:07.5 to 64
0: nvidia: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-5336 Wed Jan 14 18:29:26 PST 2004
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 96M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xd8000000
spurious 8259A interrupt: IRQ7.
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
lp0: using parport0 (polling).
SCSI subsystem driver Revision: 1.00
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 0 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 1 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 2 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 3 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 4 changed to on
Looking for splash picture.... found (800x600, 14470 bytes, v3).
Splash status on console 5 changed to on



A NAČÍTANIA MODULU:


[root@localhost andrej]# modprobe -vv snd-opl3sa2
/sbin/insmod /lib/modules/2.4.22-10mdk/kernel/sound/core/snd-hwdep.o.gz
/sbin/insmod /lib/modules/2.4.22-10mdk/kernel/sound/drivers/opl3/snd-opl3-lib.o.gz
/sbin/insmod /lib/modules/2.4.22-10mdk/kernel/sound/core/pnp/snd-pnp.o.gz
/sbin/insmod /lib/modules/2.4.22-10mdk/kernel/sound/isa/cs423x/snd-cs4231-lib.o.gz
/sbin/insmod /lib/modules/2.4.22-10mdk/kernel/sound/isa/snd-opl3sa2.o.gz



A ESTE TOTO:


[root@localhost andrej]# lsmod
Module Size Used by Tainted: P
snd-opl3sa2 9316 0 (unused)
snd-cs4231-lib 19852 0 [snd-opl3sa2]
snd-pnp 5624 0 [snd-opl3sa2]
snd-opl3-lib 8004 0 [snd-opl3sa2]
snd-hwdep 6304 0 [snd-opl3-lib]
binfmt_misc 7116 1
sg 35068 0 (autoclean) (unused)
st 30680 0 (autoclean) (unused)
sr_mod 19384 0 (autoclean) (unused)
sd_mod 13804 0 (autoclean) (unused)
scsi_mod 106176 4 (autoclean) [sg st sr_mod sd_mod]
lp 8160 0
parport_pc 25544 1
parport 34472 1 [lp parport_pc]
agpgart 48292 3 (autoclean)
nvidia 2126440 6 (autoclean)
snd-seq-oss 32000 0 (unused)
snd-seq-midi-event 6080 0 [snd-seq-oss]
snd-seq 42544 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 43652 0 (unused)
snd-mixer-oss 14200 0 [snd-pcm-oss]
snd-via82xx 15360 2
snd-pcm 79588 0 [snd-opl3sa2 snd-cs4231-lib snd-pcm-oss snd-via82xx]
snd-timer 18436 0 [snd-cs4231-lib snd-opl3-lib snd-seq snd-pcm]
snd-ac97-codec 45720 0 [snd-via82xx]
snd-mpu401-uart 4704 0 [snd-opl3sa2 snd-via82xx]
snd-rawmidi 17760 0 [snd-mpu401-uart]
snd-seq-device 5832 0 [snd-opl3-lib snd-seq-oss snd-seq snd-rawmidi]
snd-page-alloc 9044 0 [snd-cs4231-lib snd-via82xx snd-pcm]
snd 41380 2 [snd-opl3sa2 snd-cs4231-lib snd-opl3-lib snd-hwdep snd-seq-oss snd-seq-midi-event snd-seq snd-pcm-oss snd-mixer-oss snd-via82xx snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 6340 0 [snd]
af_packet 14856 0 (autoclean)
ide-floppy 16128 0 (autoclean)
ide-tape 48816 0 (autoclean)
ide-cd 33956 0 (autoclean)
cdrom 32608 0 (autoclean) [sr_mod ide-cd]
floppy 55932 2
nls_iso8859-2 4060 4 (autoclean)
nls_cp852 4284 4 (autoclean)
vfat 11820 4 (autoclean)
fat 38040 0 (autoclean) [vfat]
supermount 84032 3 (autoclean)
usb-uhci 25136 0 (unused)
usbcore 74988 1 [usb-uhci]
rtc 9004 0 (autoclean)
ext3 60048 2
jbd 39264 2 [ext3]

[Andreas]

Tak som to rozbehal!! Dakujem za uzitocne a vecne rady. Je sice co este na tom zvuku doladovat ale hlavne ze hraju obe zvukovky co win nedokazal . Snad este jedna otazka skor pre uzivatelov MDK, preco ak som Yamahu nakonfiguoval a ktora ako tak hraje po spusteni Hardrake ju nenajdem pod prislusnym harwarom?? je tam stale len ta integrovana zvukovka. tak sa majte a vdaka.