Portál AbcLinuxu, 1. května 2024 23:21
efax: 00:18 using hsfmodem-6.03.00lnxt04061800full in class 1 efax: 00:18 dialing T0908082563 efax: 01:10 Warning: number is busy efax: 01:10 failed -> /tmp/kde-ondrik/kdeprintfax_mzvCQ9B.001 efax: 01:10 done, returning 1 (number busy or modem in use) Busy... Will try again in 120 secondsmôj /var/spool/fax/etc/config.ttySHSF0
----------------------------------- CountryCode: 421 AreaCode: 52 FAXNumber: +421524566215 LongDistancePrefix: 00 InternationalPrefix: 0 DialStringRules: /etc/dialrules ServerTracing: 1 SessionTracing: 11 RecvFileMode: 0600 LogFileMode: 0600 DeviceMode: 0600 RingsBeforeAnswer: 1 SpeakerVolume: off GettyArgs: "-h %l dx_%s" LocalIdentifier: "NothingSetup" TagLineFont: etc/lutRS18.pcf TagLineFormat: "From %%l|%c|Page %%P of %%T" MaxRecvPages: 25 # # # Modem-related stuff: should refl-ect modem command interface # and hardware connection/cabling (e.g. flow control). # ModemType: Class1 # use this to supply a hint ModemRate: 19200 # rate for DCE-DTE communication ModemFlowControl: rtscts # default # ModemNoFlowCmd: AT&K0 # setup no flow control ModemHardFlowCmd: AT&K3 # setup hardware flow control ModemSoftFlowCmd: AT&K4 # setup software flow control ModemSetupDTRCmd: AT&D2 # setup so DTR drop resets modem ModemSetupDCDCmd: AT&C1 # setup so DCD reflects carrier (or not) # ModemMfrQueryCmd: !Rockwell ModemModelQueryCmd: !RC288DPi ModemRevQueryCmd: ATI3 # product information # ModemDialCmd: ATDT%s # T for tone dialing
Warning: number is busy- je obsazeno... A taky mam takovy dojem, ze byste to cislo mel vytacet bud bez nuly na zacatku, nebo 421908......
Tiskni Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.