Portál AbcLinuxu, 11. května 2024 04:17
\/
[root@localhost root]# fdisk /dev/hda
The number of cylinders for this disk is set to 1048. There is nothing wrong with that, but this is larger tha n 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions o f LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): v 248 unallocated sectors
Command (m for help):
poradte prosim, jestli ztratim data muzu se jit zastrelit
Je to srabacke reseni, ale takhle nadalku asi jedine co muzu doporucit a pri cem se na 100% neprijde o data...
Urcite to pujde vyresit i nejak elegantneji, ale riziko je tam imho vzdycky.
Command (m for help): v Partition 1 has different physical/logical beginnings (non-Linux?): phys=(372, 117, 51) logical=(116371, 175, 61) Partition 1 has different physical/logical endings: phys=(367, 32, 52) logical=(126869, 236, 45) Partition 1 does not end on cylinder boundary: phys=(367, 32, 52) should be (367, 254, 63) Partition 1: previous sectors 2038165397 disagrees with total 5908892 Partition 2 has different physical/logical beginnings (non-Linux?): phys=(357, 32, 43) logical=(82800, 34, 51) Partition 2 has different physical/logical endings: phys=(0, 13, 10) logical=(116349, 218, 61) Partition 2 does not end on cylinder boundary: phys=(0, 13, 10) should be (0, 254, 63) Partition 2: previous sectors 1869160479 disagrees with total 2308 Partition 3 has different physical/logical beginnings (non-Linux?): phys=(345, 32, 19) logical=(33550, 137, 11) Partition 3 has different physical/logical endings: phys=(324, 77, 19) logical=(120594, 153, 54) Partition 3 does not end on cylinder boundary: phys=(324, 77, 19) should be (324, 254, 63) Partition 3: previous sectors 1937352302 disagrees with total 5209727 Warning: partition 1 overlaps partition 3. Partition 4 has different physical/logical beginnings (non-Linux?): phys=(87, 1, 0) logical=(86811, 142, 3) Partition 4 has different physical/logical endings: phys=(335, 78, 2) logical=(86812, 225, 45) Partition 4 does not end on cylinder boundary: phys=(335, 78, 2) should be (335, 254, 63) Partition 4: previous sectors 1394648999 disagrees with total 5382108 Warning: partition 2 overlaps partition 4. Warning: partition 3 overlaps partition 4. Total allocated sectors 2038130962 greater than the maximum 10474380 a tady jeste celkovy pohled Device Boot Start End Blocks Id System /dev/hda1 * 1 653 5245191 c Win95 FAT32 (LBA) /dev/hda2 654 1048 3172837+ f Win95 Ext'd (LBA) /dev/hda5 654 662 72261 83 Linux /dev/hda6 663 1005 2755116 83 Linux /dev/hda7 1006 1048 345366 82 Linux swapnejdulezitejsi data uz jsem zalohoval, ale zbytek by se musel znicit, pri formatovani, tak pokud nekdo mate lepsi reseni i trochu riskanti napiste, prosim
[root@localhost root]# fdisk /dev/hda1 Command (m for help): v Partition 1 has different physical/logical beginnings (non-Linux?): phys=(372, 117, 51) logical=(116371, 175, 61) Partition 1 has different physical/logical endings: phys=(367, 32, 52) logical=(126869, 236, 45) Partition 1 does not end on cylinder boundary: phys=(367, 32, 52) should be (367, 254, 63) Partition 1: previous sectors 2038165397 disagrees with total 5908892 Partition 2 has different physical/logical beginnings (non-Linux?): phys=(357, 32, 43) logical=(82800, 34, 51) Partition 2 has different physical/logical endings: phys=(0, 13, 10) logical=(116349, 218, 61) Partition 2 does not end on cylinder boundary: phys=(0, 13, 10) should be (0, 254, 63) Partition 2: previous sectors 1869160479 disagrees with total 2308 Partition 3 has different physical/logical beginnings (non-Linux?): phys=(345, 32, 19) logical=(33550, 137, 11) Partition 3 has different physical/logical endings: phys=(324, 77, 19) logical=(120594, 153, 54) Partition 3 does not end on cylinder boundary: phys=(324, 77, 19) should be (324, 254, 63) Partition 3: previous sectors 1937352302 disagrees with total 5209727 Warning: partition 1 overlaps partition 3. Partition 4 has different physical/logical beginnings (non-Linux?): phys=(87, 1, 0) logical=(86811, 142, 3) Partition 4 has different physical/logical endings: phys=(335, 78, 2) logical=(86812, 225, 45) Partition 4 does not end on cylinder boundary: phys=(335, 78, 2) should be (335, 254, 63) Partition 4: previous sectors 1394648999 disagrees with total 5382108 Warning: partition 2 overlaps partition 4. Warning: partition 3 overlaps partition 4. Total allocated sectors 2038130962 greater than the maximum 10474380 Command (m for help): [root@localhost root]# fdisk /dev/hda The number of cylinders for this disk is set to 1048. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 255 heads, 63 sectors, 1048 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 653 5245191 c Win95 FAT32 (LBA) /dev/hda2 654 1048 3172837+ f Win95 Ext'd (LBA) /dev/hda5 654 662 72261 83 Linux /dev/hda6 663 1005 2755116 83 Linux /dev/hda7 1006 1048 345366 82 Linux swap Command (m for help):ty nejdulezitejsi data uz jsem zalohoval, ale zbytek bych pri formatovani prisel, tak jestli znate nejakou lepsi metodu tak prosim napiste....
[root@localhost root]# fdisk /dev/hda1 Command (m for help): v Partition 1 has different physical/logical beginnings (non-Linux?): phys=(372, 117, 51) logical=(116371, 175, 61) Partition 1 has different physical/logical endings: phys=(367, 32, 52) logical=(126869, 236, 45) Partition 1 does not end on cylinder boundary: phys=(367, 32, 52) should be (367, 254, 63) Partition 1: previous sectors 2038165397 disagrees with total 5908892 Partition 2 has different physical/logical beginnings (non-Linux?): phys=(357, 32, 43) logical=(82800, 34, 51) Partition 2 has different physical/logical endings: phys=(0, 13, 10) logical=(116349, 218, 61) Partition 2 does not end on cylinder boundary: phys=(0, 13, 10) should be (0, 254, 63) Partition 2: previous sectors 1869160479 disagrees with total 2308 Partition 3 has different physical/logical beginnings (non-Linux?): phys=(345, 32, 19) logical=(33550, 137, 11) Partition 3 has different physical/logical endings: phys=(324, 77, 19) logical=(120594, 153, 54) Partition 3 does not end on cylinder boundary: phys=(324, 77, 19) should be (324, 254, 63) Partition 3: previous sectors 1937352302 disagrees with total 5209727 Warning: partition 1 overlaps partition 3. Partition 4 has different physical/logical beginnings (non-Linux?): phys=(87, 1, 0) logical=(86811, 142, 3) Partition 4 has different physical/logical endings: phys=(335, 78, 2) logical=(86812, 225, 45) Partition 4 does not end on cylinder boundary: phys=(335, 78, 2) should be (335, 254, 63) Partition 4: previous sectors 1394648999 disagrees with total 5382108 Warning: partition 2 overlaps partition 4. Warning: partition 3 overlaps partition 4. Total allocated sectors 2038130962 greater than the maximum 10474380 Command (m for help): [root@localhost root]# fdisk /dev/hda The number of cylinders for this disk is set to 1048. There is nothing wrong with that, but this is larger than 1024, and could in certain setups cause problems with: 1) software that runs at boot time (e.g., old versions of LILO) 2) booting and partitioning software from other OSs (e.g., DOS FDISK, OS/2 FDISK) Command (m for help): p Disk /dev/hda: 255 heads, 63 sectors, 1048 cylinders Units = cylinders of 16065 * 512 bytes Device Boot Start End Blocks Id System /dev/hda1 * 1 653 5245191 c Win95 FAT32 (LBA) /dev/hda2 654 1048 3172837+ f Win95 Ext'd (LBA) /dev/hda5 654 662 72261 83 Linux /dev/hda6 663 1005 2755116 83 Linux /dev/hda7 1006 1048 345366 82 Linux swap Command (m for help):ty nejdulezitejsi data uz jsem zalohoval, ale zbytek bych pri formatovani prisel, tak jestli znate nejakou lepsi metodu tak prosim napiste....
Tiskni Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.