XI-626 Segmentation fault po nacteni modulu

Snazim se rozbehat tuto kartu na celkem starem PC :

#lspci -v
00:00.0 Host bridge: Silicon Integrated Systems [SiS] 620 Host (rev 02)
	Flags: bus master, medium devsel, latency 32
	Memory at e8000000 (32-bit, non-prefetchable) [size=64M]
	Capabilities: [c0] AGP version 2.0

00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
	Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
	Flags: bus master, fast devsel, latency 22
	I/O ports at <ignored>
	I/O ports at <ignored>
	I/O ports at <ignored>
	I/O ports at <ignored>
	I/O ports at ffa0 [size=16]

00:01.0 ISA bridge: Silicon Integrated Systems [SiS] 85C503/5513 (rev b1)
	Flags: bus master, medium devsel, latency 0

00:01.1 Class ff00: Silicon Integrated Systems [SiS] ACPI
	Flags: medium devsel

00:02.0 PCI bridge: Silicon Integrated Systems [SiS] 5591/5592 AGP (prog-if 00 [Normal decode])
	Flags: bus master, fast devsel, latency 0
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: e7a00000-e7afffff
	Prefetchable memory behind bridge: e6800000-e78fffff

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 10)
	Subsystem: Unknown device 4554:434e
	Flags: bus master, medium devsel, latency 64, IRQ 10
	I/O ports at de00 [size=256]
	Memory at efddff00 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2

00:0b.0 Network controller: Harris Semiconductor: Unknown device 3873 (rev 01)
	Subsystem: Harris Semiconductor: Unknown device 3873
	Flags: medium devsel, IRQ 11
	Memory at e79ff000 (32-bit, prefetchable) [size=4K]
	Capabilities: [dc] Power Management version 2

00:0d.0 VGA compatible controller: Trident Microsystems TGUI 9440 (rev e3) (prog-if 00 [VGA])
	Flags: medium devsel
	Memory at efe00000 (32-bit, non-prefetchable) [size=2M]
	Memory at efdf0000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at efde0000 [disabled] [size=64K]

00:0f.0 Multimedia audio controller: C-Media Electronics Inc CM8338A (rev 10)
	Subsystem: C-Media Electronics Inc: Unknown device 0000
	Flags: bus master, medium devsel, latency 64, IRQ 12
	I/O ports at dc00 [size=256]
	Capabilities: [c0] Power Management version 1

01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 6306 3D-AGP (rev 2a) (prog-if 00 [VGA])
	Flags: 66Mhz, medium devsel
	Memory at e7000000 (32-bit, prefetchable) [disabled] [size=8M]
	Memory at e7af0000 (32-bit, non-prefetchable) [disabled] [size=64K]
	I/O ports at cc00 [disabled] [size=128]
	Capabilities: [40] Power Management version 1
	Capabilities: [50] AGP version 1.0

Jelikoz mi jeden vykuk odpalil 4GB disk a je to precijen 366MHz celer,tak kompiluji jadro na vykonejsim PC (Sempron-gentoo) a pak ho kopiruji na toho celera.Snazil jsem se rozjet tuto kartu podle clanku zde na foru,ale marne. Kdyz nactu modul, tak to vyhodi toto :-/

hostap_pci: Driver unloaded
hostap_crypt: registered algorithm 'NULL'
hostap_pci: 0.1.0 - 2003-10-14 (Jouni Malinen <jkmaline@cc.hut.fi>)
PCI: Found IRQ 11 for device 00:0b.0
hostap_pci: Registered netdevice wlan0
prism2_hw_init: initialized in 200 ms
Unable to handle kernel NULL pointer dereference at virtual address 00000004
 printing eip:
c0114dc5
*pde = 00000000
Oops: 0002
CPU:    0
EIP:    0010:[<c0114dc5>]    Not tainted
EFLAGS: 00010046
eax: c3f76f68   ebx: 00000000   ecx: c0cbde04   edx: c0cbddfc
esi: 00000246   edi: c3f76f9c   ebp: c0cbddfc   esp: c0cbddb0
ds: 0018   es: 0018   ss: 0018
Process modprobe (pid: 493, stackpage=c0cbd000)
Stack: c3f76f68 0000fd0b c4bae2c8 0000fd0b 00000000 c2b091fc c2b09000 c3f76f60 
       00000001 00000000 c0cbc000 00000000 c011e910 c2b091d8 0021de50 00000000 
       c0cbc000 00000000 00000000 00000000 c0cbc000 00000000 00000000 c4baeb71 
Call Trace:    [<c4bae2c8>] [<c011e910>] [<c4baeb71>] [<c4bb486c>] [<c4baef4f>]
  [<c4baf62a>] [<c4bb486c>] [<c4baf8ae>] [<c4bb370f>] [<c4bb63a4>] [<c4bb6520>]
  [<c01ef255>] [<c4bb63a4>] [<c4bb6520>] [<c01ef2fc>] [<c4bb6520>] [<c4bb3854>]
  [<c4bb6520>] [<c4bb61e3>] [<c4bb3998>] [<c4bb3960>] [<c0117ab2>] [<c4bae060>]
  [<c4bb6344>] [<c4bae060>] [<c0106f3b>]

Code: 89 4b 04 89 5a 08 89 41 04 89 08 56 9d 8b 1c 24 8b 74 24 04 
 Segmentation fault

Vypis zacina driver unloadet, protoze jsem predtim zkousel jine ovladace oznacene jako Prism2neco,modul vznikly z kompilace byl v poradku, pekne se nacetl a vytvoril wlan0, ale to bylo asi tak vse, iwconfig oznacil wlan0 jako non wireless a nemohl jsem nic nastavit (krome ifconfigu).Mno a podle navodu vzdy dorazim k vypisu vyse po nacteni modulu. Po nacteni zacne karta vzadu blikat(to plati u obou modulu).
Po snaze odpojit modul zahlasi,ze zarizeni je zaneprazdneno, po zadani prikazu ifconfig muzu cekat na vypis 10let
Jinak se to snazim rozjet na debianu (woody-stable), pouzivam wireless-tools27. Myslim, ze s napajenim PCI by asi problem byt nemel(zas tak stara deska to snad nejni :-/ ). Diky vsem
Zdar Max

Měl jsem sen ... :(

Dotaz: XI-626 Segmentation fault po nacteni modulu

Odpovědi