Zprovozneni wifi Intel PRO/Wireless 2200BG

Pekny den,

snazim se o $SUBJ pod Linuxem (LFS-6.0, jadro 2.6.11.10, notebook Fujitsu Siemens lifebook e8010). Stahnul a nainstaloval jsem si firmware (ipw2200-fw-2.3) a ipw2200-1.0.4. Po zavedeni modulu:

Module                  Size  Used by
ipw2200               167688  0 
ieee80211              42948  1 ipw2200
ieee80211_crypt_ccmp    6656  0 
ieee80211_crypt_tkip    9472  0 
ieee80211_crypt_wep     4224  0 
ieee80211_crypt         4740  5
ipw2200,ieee80211,ieee80211_crypt_ccmp,ieee80211_crypt_tkip,ieee80211_crypt_wep

ovsem dmesg vypise chybu:

ieee80211_crypt: registered algorithm 'NULL'
ieee80211_crypt: registered algorithm 'WEP'
ieee80211_crypt: registered algorithm 'TKIP'
ieee80211_crypt: registered algorithm 'CCMP'
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.4
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ACPI: PCI interrupt 0000:02:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
ipw2200: U ipw_pci_probe pci_resource_len = 0x00001000
ipw2200: U ipw_pci_probe pci_resource_base = f8954000
ipw2200: U ipw_sw_reset Hardware crypto [on]
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw-2.3-boot.fw load failed: Reason -2
ipw2200: Unable to load firmware: 0xFFFFFFFE
ipw2200: failed to register network device
ipw2200: probe of 0000:02:0d.0 failed with error -5

Problem je, ze zminovany soubor ipw-2.3-boot.fw je na svem miste (/usr/lib/hotplug/firmware/). Kde tedy muze byt zakopany pes?

nevím, jestli to pomůže, ale hned pod downloadem ovladačů jsem našel toto:

Issues
Firmware files fail to load even if installed
In some kernel configurations (users have most frequently reported the problem only with 2.6.9), the default timeout value for the hotplug subsystem is too low. You may have this problem if you see the following in your kernel log (via dmesg or /var/log/messages):

ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.0.1
ipw2200: Copyright(c) 2003-2004 Intel Corporation
ipw2200: Detected Intel PRO/Wireless 2200BG Network Connection
ipw2200: ipw-2.2-boot.fw load failed: Reason -2
ipw2200: Unable to load firmware: 0xFFFFFFFE
ipw2200: failed to register network device
ipw2200: probe of 0000:00:0b.0 failed with error -5

To work around this, you can increase the default timeout value:

echo 100 > /sys/class/firmware/timeout

and then reload the ipw2200 module. If this corrects your problem, you may wish to add the above line to your system startup scripts prior to the point at which the driver module would be loaded.

The other most common reason for getting the above error is that the firmware files are not installed in the correct location. Please see the INSTALL document for information on installing the firmware files.

http://ipw2200.sourceforge.net/index.php#issues

Dotaz: Zprovozneni wifi Intel PRO/Wireless 2200BG

Odpovědi