Portál AbcLinuxu, 10. května 2025 07:32

Dotaz: Nenajde mi vypalovacku NEC

24.8.2005 11:48 ikar | skóre: 6
Nenajde mi vypalovacku NEC
Přečteno: 124×
Odpovědět | Admin
Zdravicko, mam tuhle vypalovacku DVD_RW ND-1300A a FC 4 a nejak se mu nechce vypalovat, kdyz spustim cmd
# cdrecord -scanbus
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c        1.83 04/05/20 Copyright 1997 J. Schilling').
scsibus1:
        1,0,0   100) '_NEC    ' 'DVD_RW ND-1300A ' '1.0B' Removable CD-ROM
        1,1,0   101) *
        1,2,0   102) *
        1,3,0   103) *
        1,4,0   104) *
        1,5,0   105) *
        1,6,0   106) *
        1,7,0   107) *

tak to vypada ze ji nasel na 1,0,0, ale kdyz dam
# cdrecord -dev=1,0,0  driveropts=help -checkdrive
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
cdrecord: Invalid or incomplete multibyte or wide character. Cannot open SCSI driver.
cdrecord: For possible targets try 'cdrecord -scanbus'.
cdrecord: For possible transport specifiers try 'cdrecord dev=help'.
Nevite proc ten druhy prikaz neprojde a navypise mi info o vypalovacce kdyz ji prvni prokaz najde ?

Diky

IkaR
Nástroje: Začni sledovat (0) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

24.8.2005 12:10 Neci | skóre: 24 | blog: den_linuxaka
Rozbalit Rozbalit vše Re: Nenajde mi vypalovacku NEC
Odpovědět | | Sbalit | Link | Blokovat | Admin
skus
-dev=ATAPI:1,0,0
a hod sem vypis.
24.8.2005 12:36 ikar | skóre: 6
Rozbalit Rozbalit vše Re: Nenajde mi vypalovacku NEC
Diky za nasmerovani :)
#cdrecord -dev=ATAPI:1,0,0 driveropts=help -checkdrive
scsidev: 'ATAPI:1,0,0'
devname: 'ATAPI'
scsibus: 1 target: 0 lun: 0
Use of ATA is preferred over ATAPI.
Warning: Using ATA Packet interface.
Warning: The related Linux kernel interface code seems to be unmaintained.
Warning: There is absolutely NO DMA, operations thus are slow.
Using libscg version 'schily-0.8'.
cdrecord: Cannot do inquiry for CD/DVD-Recorder.
cdrecord: Input/output error. test unit ready: scsi sendcmd: fatal error
CDB:  00 00 00 00 00 00
cmd finished after 0.000s timeout 40s
uz mi to jede musel jsem tam dat
cdrecord -dev=ATA:1,0,0 driveropts=help -checkdrive
scsidev: 'ATA:1,0,0'
devname: 'ATA'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c        1.83 04/05/20 Copyright 1997 J. Schilling').
Device type    : Removable CD-ROM
Version        : 0
Response Format: 2
Capabilities   :
Vendor_info    : '_NEC    '
Identifikation : 'DVD_RW ND-1300A '
Revision       : '1.0B'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Driver options:
burnfree        Prepare writer to use BURN-Free technology
noburnfree      Disable using BURN-Free technology
Diky

Založit nové vláknoNahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.