Dotaz: Ako sa pripojit cez seriovu konzolu k switchu? -telnet

[hasty]

Switch je Micronet sp1658A. Potrebujem zmenit nastavenia, switch nema tlacidlo reset.

Kabel na prepojenie je Edgeport/1. Okrem toho, tento kabel je vhodny na prepojenie?.

Vdaka za rady.

Vypis z #lsusb -vs 004:002 je:

Bus 004 Device 002: ID 1608:0240 Inside Out Networks [hex] Edgeport/1
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass         0 
  bDeviceProtocol       255 
  bMaxPacketSize0         8
  idVendor           0x1608 Inside Out Networks [hex]
  idProduct          0x0240 Edgeport/1
  bcdDevice            0.01
  iManufacturer           1 Inside Out Networks
  iProduct                2 Edgeport/1
  iSerial                 3 I61648897-0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower               80mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol    255 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x87  EP 7 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               1
Device Status:     0x0001
  Self Powered

 

 

Odpovědi

[pasmen]

To bude chtít spíš Cutecom nebo podobnou věc. Přes telnet se k tomu nepřipojíš, protože ty potřebuješ posílat přímo data na seriový port (resp. emulovaný seriový port).

[the.max]

minicom?

[mozog]

screen ?

[Jesus Jimenez]

gtkterm?