Portál AbcLinuxu, 11. května 2025 05:05

Dotaz: CDMA APE-540H - odpojeni chvili po pripojeni

houska avatar 9.3.2009 10:24 houska | skóre: 41 | blog: HW
CDMA APE-540H - odpojeni chvili po pripojeni
Přečteno: 640×
Odpovědět | Admin

Ahoj, mám cdma modem ape-450h. Připojení jsem nastavoval podle uvedeného návodu, ale nemohu se připojit.

Po zasunuti karty do slotu se mi spusti skript ktery by mel spojeni nahodit. Modem se připojí, pár paketů (asi 30) projde a pak je konec. Další asi půl minutu se nic neděje a pak v syslogu vyskočí:

[ 6768.239965] usb 10-1: reset full speed USB device using ohci_hcd and address 3
[ 6768.656369] sr1: CDROM (ioctl) error, command: Get configuration 46 00 00 00 00 00 00 00 20 00
[ 6768.656369] sr: Sense Key : No Sense [current]
[ 6768.656369] sr: Add. Sense: No additional sense information

Celý průběh je:
Mar  9 09:53:46 rathousky-jan kernel: [ 6685.977997] pccard: CardBus card inserted into slot 0
Mar  9 09:53:46 rathousky-jan kernel: [ 6685.978612] ehci_hcd 0000:04:00.1: enabling device (0000 -> 0002)
Mar  9 09:53:46 rathousky-jan kernel: [ 6685.978630] ACPI: PCI Interrupt 0000:04:00.1[A] -> GSI 19 (level, low) -> IRQ 19
Mar  9 09:53:46 rathousky-jan kernel: [ 6685.978679] ehci_hcd 0000:04:00.1: EHCI Host Controller
Mar  9 09:53:46 rathousky-jan kernel: [ 6685.978748] ehci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 9
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.003519] ehci_hcd 0000:04:00.1: irq 19, io mem 0x8c001000
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.015405] ehci_hcd 0000:04:00.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.015572] usb usb9: configuration #1 chosen from 1 choice
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.015649] hub 9-0:1.0: USB hub found
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.015668] hub 9-0:1.0: 3 ports detected
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.110802] ohci_hcd 0000:04:00.0: enabling device (0000 -> 0002)
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.110802] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.110802] ohci_hcd 0000:04:00.0: OHCI Host Controller
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.125173] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.125179] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.125181] usb usb9: Product: EHCI Host Controller
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.125183] usb usb9: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.125184] usb usb9: SerialNumber: 0000:04:00.1
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.126493] ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 10
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.126493] ohci_hcd 0000:04:00.0: irq 19, io mem 0x8c000000
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.183919] usb usb10: configuration #1 chosen from 1 choice
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.183919] hub 10-0:1.0: USB hub found
Mar  9 09:53:46 rathousky-jan kernel: [ 6686.183919] hub 10-0:1.0: 3 ports detected
Mar  9 09:53:47 rathousky-jan kernel: [ 6686.293325] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001
Mar  9 09:53:47 rathousky-jan kernel: [ 6686.293325] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar  9 09:53:47 rathousky-jan kernel: [ 6686.293325] usb usb10: Product: OHCI Host Controller
Mar  9 09:53:47 rathousky-jan kernel: [ 6686.293325] usb usb10: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
Mar  9 09:53:47 rathousky-jan kernel: [ 6686.293325] usb usb10: SerialNumber: 0000:04:00.0
Mar  9 09:53:49 rathousky-jan kernel: [ 6689.109840] usb 10-1: new full speed USB device using ohci_hcd and address 2
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.337235] usb 10-1: configuration #1 chosen from 1 choice
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.345199] usb 10-1: New USB device found, idVendor=05c6, idProduct=6503
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.345199] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.345199] usb 10-1: Product: USB MMC Storage
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.345199] usb 10-1: Manufacturer: AnyDATA Corporation
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.345199] usb 10-1: SerialNumber: 000000000002
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.517194] Initializing USB Mass Storage driver...
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.517194] scsi6 : SCSI emulation for USB Mass Storage devices
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.517194] usbcore: registered new interface driver usb-storage
Mar  9 09:53:50 rathousky-jan kernel: [ 6689.517194] USB Mass Storage support registered.
Mar  9 09:53:55 rathousky-jan kernel: [ 6694.563859] scsi 6:0:0:0: CD-ROM            AnyDATA  CD-ROM           1.00 PQ: 0 ANSI: 2
Mar  9 09:53:55 rathousky-jan kernel: [ 6694.597556] sr1: scsi3-mmc drive: 0x/0x caddy
Mar  9 09:53:55 rathousky-jan kernel: [ 6694.597556] sr 6:0:0:0: Attached scsi generic sg2 type 5
Mar  9 09:53:55 rathousky-jan kernel: [ 6694.869818] sr: Sense Key : No Sense [current]
Mar  9 09:53:55 rathousky-jan kernel: [ 6694.869818] sr: Add. Sense: No additional sense information
Mar  9 09:54:00 rathousky-jan kernel: [ 6700.036327] usb 10-1: USB disconnect, address 2
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.548035] usb 10-1: new full speed USB device using ohci_hcd and address 3
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.767556] usb 10-1: configuration #1 chosen from 1 choice
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.780236] scsi7 : SCSI emulation for USB Mass Storage devices
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.780236] usb 10-1: New USB device found, idVendor=16d5, idProduct=6502
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.780236] usb 10-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.780236] usb 10-1: Product: AnyDATA CDMA Products
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.780236] usb 10-1: Manufacturer: AnyDATA Corporation
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.941566] usbcore: registered new interface driver usbserial
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.941566] usbserial: USB Serial support registered for generic
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.941566] usbcore: registered new interface driver usbserial_generic
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.941566] usbserial: USB Serial Driver core
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] usbserial: USB Serial support registered for GSM modem (1-port)
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] option 10-1:1.0: GSM modem (1-port) converter detected
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] usb 10-1: GSM modem (1-port) converter now attached to ttyUSB0
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] option 10-1:1.1: GSM modem (1-port) converter detected
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] usb 10-1: GSM modem (1-port) converter now attached to ttyUSB1
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] option 10-1:1.2: GSM modem (1-port) converter detected
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] usb 10-1: GSM modem (1-port) converter now attached to ttyUSB2
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] usbcore: registered new interface driver option
Mar  9 09:54:02 rathousky-jan kernel: [ 6701.945567] option: USB Driver for GSM modems: v0.7.2
Mar  9 09:54:07 rathousky-jan kernel: [ 6706.879719] scsi 7:0:0:0: CD-ROM            AnyDATA  CD-ROM           1.00 PQ: 0 ANSI: 2
Mar  9 09:54:07 rathousky-jan kernel: [ 6706.900099] sr1: scsi3-mmc drive: 0x/0x caddy
Mar  9 09:54:07 rathousky-jan kernel: [ 6706.900099] sr 7:0:0:0: Attached scsi generic sg2 type 5
Mar  9 09:54:07 rathousky-jan kernel: [ 6707.157639] sr: Sense Key : No Sense [current]
Mar  9 09:54:07 rathousky-jan kernel: [ 6707.157639] sr: Add. Sense: No additional sense information
Mar  9 09:54:10 rathousky-jan kernel: [ 6710.428087] PPP generic driver version 2.4.2
Mar  9 09:54:10 rathousky-jan pppd[10941]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:10 rathousky-jan pppd[10945]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:10 rathousky-jan pppd[10945]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:10 rathousky-jan pppd[10945]: Exit.
Mar  9 09:54:10 rathousky-jan pppd[10942]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:10 rathousky-jan pppd[10942]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:10 rathousky-jan pppd[10942]: Exit.
Mar  9 09:54:10 rathousky-jan pppd[10946]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:10 rathousky-jan pppd[10946]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:10 rathousky-jan pppd[10946]: Exit.
Mar  9 09:54:10 rathousky-jan pppd[10943]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:10 rathousky-jan pppd[10943]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:10 rathousky-jan pppd[10943]: Exit.
Mar  9 09:54:10 rathousky-jan pppd[10947]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:10 rathousky-jan pppd[10947]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:10 rathousky-jan pppd[10947]: Exit.
Mar  9 09:54:10 rathousky-jan pppd[10948]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:10 rathousky-jan pppd[10948]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:10 rathousky-jan pppd[10948]: Exit.
Mar  9 09:54:11 rathousky-jan chat[10960]: abort on (BUSY)
Mar  9 09:54:11 rathousky-jan chat[10960]: abort on (NO CARRIER)
Mar  9 09:54:11 rathousky-jan chat[10960]: abort on (VOICE)
Mar  9 09:54:11 rathousky-jan chat[10960]: abort on (NO DIALTONE)
Mar  9 09:54:11 rathousky-jan chat[10960]: abort on (NO DIAL TONE)
Mar  9 09:54:11 rathousky-jan chat[10960]: abort on (NO ANSWER)
Mar  9 09:54:11 rathousky-jan chat[10960]: abort on (DELAYED)
Mar  9 09:54:11 rathousky-jan chat[10960]: send (ATZ^M)
Mar  9 09:54:11 rathousky-jan chat[10960]: expect (OK)
Mar  9 09:54:11 rathousky-jan chat[10960]: ^M
Mar  9 09:54:11 rathousky-jan chat[10960]: OK
Mar  9 09:54:11 rathousky-jan chat[10960]:  -- got it
Mar  9 09:54:11 rathousky-jan chat[10960]: send (ATDT#777^M)
Mar  9 09:54:12 rathousky-jan chat[10960]: expect (CONNECT)
Mar  9 09:54:12 rathousky-jan chat[10960]: ^M
Mar  9 09:54:13 rathousky-jan chat[10960]: ATDT#777^M^M
Mar  9 09:54:13 rathousky-jan chat[10960]: CONNECT
Mar  9 09:54:13 rathousky-jan chat[10960]:  -- got it
Mar  9 09:54:13 rathousky-jan chat[10960]: send (\d)
Mar  9 09:54:14 rathousky-jan pppd[10941]: Serial connection established.
Mar  9 09:54:14 rathousky-jan pppd[10941]: Using interface ppp0
Mar  9 09:54:14 rathousky-jan pppd[10941]: Connect: ppp0 <--> /dev/ttyUSB0
Mar  9 09:54:15 rathousky-jan pppd[11032]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:15 rathousky-jan pppd[11032]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:15 rathousky-jan pppd[11032]: Exit.
Mar  9 09:54:15 rathousky-jan pppd[11033]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:15 rathousky-jan pppd[11034]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:15 rathousky-jan pppd[11034]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:15 rathousky-jan pppd[11034]: Exit.
Mar  9 09:54:15 rathousky-jan pppd[11037]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:15 rathousky-jan pppd[11037]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:15 rathousky-jan pppd[11037]: Exit.
Mar  9 09:54:15 rathousky-jan pppd[11033]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:15 rathousky-jan pppd[11033]: Exit.
Mar  9 09:54:15 rathousky-jan pppd[11035]: pppd 2.4.4 started by root, uid 0
Mar  9 09:54:15 rathousky-jan pppd[11035]: Device ttyUSB0 is locked by pid 10941
Mar  9 09:54:15 rathousky-jan pppd[11035]: Exit.
Mar  9 09:54:17 rathousky-jan pppd[10941]: PAP authentication succeeded
Mar  9 09:54:17 rathousky-jan kernel: [ 6717.205442] PPP BSD Compression module registered
Mar  9 09:54:17 rathousky-jan kernel: [ 6717.314349] PPP Deflate Compression module registered
Mar  9 09:54:17 rathousky-jan pppd[10941]: local  IP address 10.162.49.54
Mar  9 09:54:17 rathousky-jan pppd[10941]: remote IP address 10.160.3.42
Mar  9 09:55:07 rathousky-jan kernel: [ 6768.239965] usb 10-1: reset full speed USB device using ohci_hcd and address 3
Mar  9 09:55:08 rathousky-jan kernel: [ 6768.656369] sr: Sense Key : No Sense [current]
Mar  9 09:55:08 rathousky-jan kernel: [ 6768.656369] sr: Add. Sense: No additional sense information
Mar  9 09:56:08 rathousky-jan kernel: [ 6829.994760] usb 10-1: reset full speed USB device using ohci_hcd and address 3
Mar  9 09:57:17 rathousky-jan pppd[10941]: No response to 4 echo-requests
Mar  9 09:57:17 rathousky-jan pppd[10941]: Serial link appears to be disconnected.
Mar  9 09:57:17 rathousky-jan pppd[10941]: Connect time 3.0 minutes.
Mar  9 09:57:17 rathousky-jan pppd[10941]: Sent 90760 bytes, received 38568 bytes.
Mar  9 09:57:23 rathousky-jan pppd[10941]: Connection terminated.
Mar  9 09:57:24 rathousky-jan pppd[10941]: Modem hangup
Mar  9 09:57:24 rathousky-jan pppd[10941]: Exit.
Nástroje: Začni sledovat (0) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

houska avatar 13.3.2009 16:06 houska | skóre: 41 | blog: HW
Rozbalit Rozbalit vše Re: CDMA APE-540H - odpojeni chvili po pripojeni
Odpovědět | | Sbalit | Link | Blokovat | Admin
tak z konzole se mi to nastavit nepovedlo, tak jsem zkusil kppp, chvili jsem nastavoval, ale stale mi vracelo
The remote system is required to authenticate itself
a na to jsem nekde nasel ze je treba v /etc/ppp/options zakomentovat volbu "auth" a voila jede to

Založit nové vláknoNahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.