Portál AbcLinuxu, 10. května 2025 22:07
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 003 Device 002: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB Bus 001 Device 003: ID 8087:07da Intel Corp. Bus 001 Device 004: ID 13d3:5710 IMC Networks Bus 003 Device 003: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse Bus 003 Device 004: ID 1c4f:0026 SiGma Micro Bus 003 Device 021: ID 22b8:2de7 Motorola PCS
[ 1.711430] type=2000 audit(1358946042.556:1): initialized
[ 1.732434] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.734031] VFS: Disk quotas dquot_6.5.2
[ 1.734066] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.734430] fuse init (API version 7.17)
[ 1.734502] msgmni has been set to 15738
[ 1.734805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.734828] io scheduler noop registered
[ 1.734829] io scheduler deadline registered
[ 1.734853] io scheduler cfq registered (default)
[ 1.734917] pcieport 0000:00:01.0: setting latency timer to 64
[ 1.734953] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.735133] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.735149] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.735185] intel_idle: MWAIT substates: 0x21120
[ 1.735186] intel_idle: v0.4 model 0x3A
[ 1.735187] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.794915] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.794954] ACPI: AC Adapter [AC0] (on-line)
[ 1.795043] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 1.818905] ACPI: Lid Switch [LID]
[ 1.818937] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.818942] ACPI: Sleep Button [SLPB]
[ 1.818969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.818971] ACPI: Power Button [PWRF]
[ 1.872222] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.872224] ACPI: Thermal Zone [THRM] (31 C)
[ 1.872243] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.872248] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.872269] ERST: Table is not found!
[ 1.872271] GHES: HEST is not enabled!
[ 1.872288] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.872328] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.922978] Linux agpgart interface v0.103
[ 1.923045] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.923313] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.924979] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.925086] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.926080] brd: module loaded
[ 1.926582] loop: module loaded
[ 1.926687] ahci 0000:00:1f.2: version 3.0
[ 1.926699] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.926743] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.942703] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.942706] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.942711] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.951020] scsi0 : ahci
[ 1.951086] scsi1 : ahci
[ 1.951147] scsi2 : ahci
[ 1.951201] scsi3 : ahci
[ 1.951257] scsi4 : ahci
[ 1.951311] scsi5 : ahci
[ 1.951467] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 41
[ 1.951469] ata2: DUMMY
[ 1.951471] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 41
[ 1.951473] ata4: DUMMY
[ 1.951474] ata5: DUMMY
[ 1.951475] ata6: DUMMY
[ 1.951757] Fixed MDIO Bus: probed
[ 1.951771] tun: Universal TUN/TAP device driver, 1.6
[ 1.951772] tun: (C) 1999-2004 Max Krasnyansky
[ 1.951807] PPP generic driver version 2.4.2
[ 1.951876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.951890] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.951905] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.951909] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.951943] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.951966] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.955854] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.955867] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7a18000
[ 1.970636] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.970747] hub 1-0:1.0: USB hub found
[ 1.970750] hub 1-0:1.0: 2 ports detected
[ 1.970795] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.970809] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.970812] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.970844] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.970864] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.974751] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.974764] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7a17000
[ 1.990609] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.990711] hub 2-0:1.0: USB hub found
[ 1.990714] hub 2-0:1.0: 2 ports detected
[ 1.990755] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.990764] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.990785] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.990829] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.990832] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.990865] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.990948] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.990952] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7a00000
[ 1.990991] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.991079] xHCI xhci_add_endpoint called for root hub
[ 1.991081] xHCI xhci_check_bandwidth called for root hub
[ 1.991103] hub 3-0:1.0: USB hub found
[ 1.991111] hub 3-0:1.0: 4 ports detected
[ 1.991151] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.991179] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.991235] xHCI xhci_add_endpoint called for root hub
[ 1.991237] xHCI xhci_check_bandwidth called for root hub
[ 1.991252] hub 4-0:1.0: USB hub found
[ 1.991259] hub 4-0:1.0: 4 ports detected
[ 2.038593] usbcore: registered new interface driver libusual
[ 2.038623] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.040303] i8042: Detected active multiplexing controller, rev 1.1
[ 2.041230] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.041234] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.041240] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.041242] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.041244] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.041349] mousedev: PS/2 mouse device common for all mice
[ 2.041478] rtc_cmos 00:06: RTC can wake from S4
[ 2.041575] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.041603] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.041660] device-mapper: uevent: version 1.0.3
[ 2.041710] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.041800] cpuidle: using governor ladder
[ 2.041931] cpuidle: using governor menu
[ 2.041933] EFI Variables Facility v0.08 2004-May-17
[ 2.042074] TCP cubic registered
[ 2.042143] NET: Registered protocol family 10
[ 2.042431] NET: Registered protocol family 17
[ 2.042434] Registering the dns_resolver key type
[ 2.042538] PM: Hibernation image not present or could not be loaded.
[ 2.042546] registered taskstats version 1
[ 2.048804] Magic number: 13:37:29
[ 2.048901] rtc_cmos 00:06: setting system clock to 2013-01-23 13:00:43 UTC (1358946043)
[ 2.049524] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.049525] EDD information not available.
[ 2.075568] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.270280] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.270318] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.273124] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.273131] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.274264] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133
[ 2.276805] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.276813] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.277945] ata3.00: configured for UDMA/133
[ 2.281335] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.281596] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.281604] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.286256] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.291971] ata1.00: ATA-8: KINGSTON SV300S37A120G, 505ABBF0, max UDMA/133
[ 2.291977] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.301305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.301521] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.301529] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.311943] ata1.00: configured for UDMA/133
[ 2.312183] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5
[ 2.312325] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.312340] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.312627] sd 0:0:0:0: [sda] Write Protect is off
[ 2.312629] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.312823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.313806] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.00 PQ: 0 ANSI: 5
[ 2.314038] sda: sda1 sda2 < sda5 >
[ 2.314518] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.315868] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.315872] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.316000] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.316060] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.317122] Freeing unused kernel memory: 924k freed
[ 2.317208] Write protecting the kernel read-only data: 12288k
[ 2.320433] Freeing unused kernel memory: 1604k freed
[ 2.322830] Freeing unused kernel memory: 1196k freed
[ 2.333790] udevd[106]: starting version 175
[ 2.377127] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.377148] r8169 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.377184] r8169 0000:04:00.2: (unregistered net_device): unknown MAC, using family default
[ 2.377201] r8169 0000:04:00.2: setting latency timer to 64
[ 2.377293] r8169 0000:04:00.2: irq 43 for MSI/MSI-X
[ 2.377742] r8169 0000:04:00.2: eth0: RTL8168b/8111b at 0xffffc9000578a000, 30:85:a9:12:60:22, XID 08800880 IRQ 43
[ 2.377745] r8169 0000:04:00.2: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.391642] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 2.392130] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6294417
[ 2.392335] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6294257
[ 2.392343] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6294260
[ 2.393078] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4194341
[ 2.394069] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4204568
[ 2.394879] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4197575
[ 2.395072] EXT4-fs (sda1): 6 orphan inodes deleted
[ 2.395074] EXT4-fs (sda1): recovery complete
[ 2.396521] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.418603] hub 1-1:1.0: USB hub found
[ 2.418733] hub 1-1:1.0: 6 ports detected
[ 2.525605] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.529948] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.572745] udevd[421]: starting version 175
[ 2.573564] Adding 8269820k swap on /dev/sda5. Priority:-1 extents:1 across:8269820k SS
[ 2.582995] lp: driver loaded but no devices found
[ 2.619829] wmi: Mapper loaded
[ 2.625230] [drm] Initialized drm 1.1.0 20060810
[ 2.627003] nvidia: module license 'NVIDIA' taints kernel.
[ 2.627007] Disabling lock debugging due to kernel taint
[ 2.632771] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.632777] i915 0000:00:02.0: setting latency timer to 64
[ 2.651153] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.680431] type=1400 audit(1358946044.128:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser"
[ 2.680794] type=1400 audit(1358946044.128:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser"
[ 2.681009] type=1400 audit(1358946044.128:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser"
[ 2.682248] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 2.682253] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 2.682257] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 2.682264] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.682334] nvidia 0000:01:00.0: setting latency timer to 64
[ 2.682338] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 2.682708] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.14 Tue Oct 9 11:52:41 PDT 2012
[ 2.685920] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.686256] hub 2-1:1.0: USB hub found
[ 2.686431] hub 2-1:1.0: 6 ports detected
[ 2.710688] Refined TSC clocksource calibration: 2494.334 MHz.
[ 2.710693] Switching to clocksource tsc
[ 2.817069] cfg80211: Calling CRDA to update world regulatory domain
[ 2.823553] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 2.823557] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.823859] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.823863] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.823865] [drm] Driver supports precise vblank timestamp query.
[ 2.823927] [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions
[ 2.823961] [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions
[ 2.832342] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.832344] Copyright(c) 2003-2011 Intel Corporation
[ 2.832387] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.832396] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 2.832421] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 2.832423] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005794000
[ 2.832425] iwlwifi 0000:03:00.0: HW Revision ID = 0xC4
[ 2.832517] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2.832552] iwlwifi 0000:03:00.0: Detected 2000 Series 2x2 BGN/BT, REV=0xC8
[ 2.832620] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 2.851388] iwlwifi 0000:03:00.0: device EEPROM VER=0x81c, CALIB=0x6
[ 2.851391] iwlwifi 0000:03:00.0: Device SKU: 0X150
[ 2.851392] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 2.851478] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 2.870500] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 2.933664] asus_wmi: ASUS WMI generic driver loaded
[ 2.933992] asus_wmi: Initialization: 0x1
[ 2.934032] asus_wmi: BIOS WMI version: 7.9
[ 2.934080] asus_wmi: SFUN value: 0x4a0877
[ 2.938458] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input4
[ 2.938520] init: failsafe main process (820) killed by TERM signal
[ 2.947347] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
[ 2.947598] Registered led device: phy0-led
[ 2.947626] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2.978575] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.987291] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2.987295] cfg80211: World regulatory domain updated:
[ 2.987296] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.987299] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.987301] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.987304] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.987306] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.987308] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.992540] ppdev: user-space parallel port driver
[ 3.028767] Bluetooth: Core ver 2.16
[ 3.028902] NET: Registered protocol family 31
[ 3.028904] Bluetooth: HCI device and connection manager initialized
[ 3.028907] Bluetooth: HCI socket layer initialized
[ 3.028908] Bluetooth: L2CAP socket layer initialized
[ 3.028913] Bluetooth: SCO socket layer initialized
[ 3.032626] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.032630] Bluetooth: BNEP filters: protocol multicast
[ 3.036684] Bluetooth: RFCOMM TTY layer initialized
[ 3.036689] Bluetooth: RFCOMM socket layer initialized
[ 3.036691] Bluetooth: RFCOMM ver 1.11
[ 3.043843] asus_wmi: Backlight controlled by ACPI video driver
[ 3.045628] type=1400 audit(1358946044.496:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=936 comm="apparmor_parser"
[ 3.045949] type=1400 audit(1358946044.496:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=936 comm="apparmor_parser"
[ 3.055220] type=1400 audit(1358946044.504:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=962 comm="apparmor_parser"
[ 3.056904] type=1400 audit(1358946044.504:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=963 comm="apparmor_parser"
[ 3.058605] type=1400 audit(1358946044.508:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=963 comm="apparmor_parser"
[ 3.058811] type=1400 audit(1358946044.508:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=963 comm="apparmor_parser"
[ 3.090276] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 3.097893] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 3.125954] bbswitch: version 0.4.2
[ 3.125962] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 3.125971] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 3.126086] bbswitch: detected an Optimus _DSM function
[ 3.126093] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 3.135662] init: alsa-restore main process (1027) terminated with status 19
[ 3.145288] nvidia 0000:01:00.0: PCI INT A disabled
[ 3.156619] bbswitch: disabling discrete graphics
[ 3.156762] bbswitch: Result of Optimus _DSM call: 01000059
[ 3.190679] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 3.218839] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 3.261099] pci 0000:01:00.0: power state changed by ACPI to D3
[ 3.296637] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input5
[ 3.365096] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 3.372682] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 3.465393] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.465619] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.477319] r8169 0000:04:00.2: eth0: link down
[ 3.477325] r8169 0000:04:00.2: eth0: link down
[ 3.477791] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.478017] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.488856] fbcon: inteldrmfb (fb0) is primary device
[ 3.488924] Console: switching to colour frame buffer device 170x48
[ 3.488943] fb0: inteldrmfb frame buffer device
[ 3.488944] drm: registered panic notifier
[ 3.489586] ACPI Warning: _BQC returned an invalid level (20110623/video-480)
[ 3.489745] acpi device:06: registered as cooling_device4
[ 3.489791] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input6
[ 3.490374] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 3.505513] ACPI Warning: _BQC returned an invalid level (20110623/video-480)
[ 3.505723] acpi device:40: registered as cooling_device5
[ 3.528805] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 3.528861] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.528907] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.528977] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.528984] mei 0000:00:16.0: setting latency timer to 64
[ 3.529049] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[ 3.532750] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.532824] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 3.532850] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.544866] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[ 4.087171] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 4.087232] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 4.087274] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 4.091087] HDMI: detected monitor IPS224 at connection type HDMI
[ 4.091089] HDMI: available speakers: FL/FR
[ 4.091092] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 4.094288] HDMI: detected monitor IPS224 at connection type HDMI
[ 4.094289] HDMI: available speakers: FL/FR
[ 4.094291] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 4.094383] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.094491] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.094550] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.187020] r8169 0000:04:00.2: eth0: link up
[ 5.187479] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.373115] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
[ 5.373172] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 5.562153] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 5.562213] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 5.861592] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 5.865092] HDMI: detected monitor IPS224 at connection type HDMI
[ 5.865094] HDMI: available speakers: FL/FR
[ 5.865096] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 7.879090] usb 3-1: device descriptor read/8, error -110
[ 12.992490] usb 3-1: device descriptor read/8, error -110
[ 13.208173] usb 3-1: new high-speed USB device number 3 using xhci_hcd
[ 13.208283] usb 3-1: Device not responding to set address.
[ 13.411988] usb 3-1: Device not responding to set address.
[ 13.615623] usb 3-1: device not accepting address 3, error -71
[ 13.727496] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[ 13.727605] usb 3-1: Device not responding to set address.
[ 13.931343] usb 3-1: Device not responding to set address.
[ 14.134944] usb 3-1: device not accepting address 4, error -71
[ 14.246828] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[ 14.246943] usb 3-1: Device not responding to set address.
[ 14.450636] usb 3-1: Device not responding to set address.
[ 14.654275] usb 3-1: device not accepting address 5, error -71
[ 14.654309] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 14.766153] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[ 14.784365] hub 3-3:1.0: USB hub found
[ 14.784618] hub 3-3:1.0: 4 ports detected
[ 14.858212] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 14.957999] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 14.958138] usbcore: registered new interface driver btusb
[ 15.025997] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd
[ 15.187811] Linux video capture interface: v2.00
[ 15.188219] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
[ 15.195103] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
[ 15.195237] usbcore: registered new interface driver uvcvideo
[ 15.195239] USB Video Class driver (1.1.1)
[ 15.397291] eth0: no IPv6 routers present
[ 16.512189] usb 3-3.2: new low-speed USB device number 7 using xhci_hcd
[ 16.532998] usb 3-3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 16.539983] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/input/input12
[ 16.540089] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-3.2/input0
[ 16.540100] usbcore: registered new interface driver usbhid
[ 16.540101] usbhid: USB HID core driver
[ 16.604053] usb 3-3.3: new low-speed USB device number 8 using xhci_hcd
[ 16.626414] usb 3-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 16.626418] usb 3-3.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 16.629146] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.0/input/input13
[ 16.629284] generic-usb 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-3.3/input0
[ 16.632607] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.1/input/input14
[ 16.632738] generic-usb 0003:1C4F:0026.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-3.3/input1
[ 22.315346] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
[ 22.315660] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 22.664047] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 22.664105] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 22.963468] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 22.966963] HDMI: detected monitor IPS224 at connection type HDMI
[ 22.966965] HDMI: available speakers: FL/FR
[ 22.966967] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 477.136495] usb 3-3: USB disconnect, device number 6
[ 477.136502] usb 3-3.2: USB disconnect, device number 7
[ 477.256043] usb 3-3.3: USB disconnect, device number 8
[ 487.386711] usb 3-2: new high-speed USB device number 9 using xhci_hcd
[ 487.434560] xhci_hcd 0000:00:14.0: device LPM test failed, may disconnect and re-enumerate
[ 487.435036] usb 3-2: ep 0x8b - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 487.435041] usb 3-2: ep 0xa - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 487.439707] Initializing USB Mass Storage driver...
[ 487.439835] scsi6 : usb-storage 3-2:1.0
[ 487.440021] usbcore: registered new interface driver usb-storage
[ 487.440023] USB Mass Storage support registered.
[ 487.440198] usbcore: registered new interface driver uas
[ 488.439199] scsi 6:0:0:0: Direct-Access Zalman ZM-HE130 0201 PQ: 0 ANSI: 6
[ 488.440234] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 488.445257] sd 6:0:0:0: [sdb] 1465149167 512-byte logical blocks: (750 GB/698 GiB)
[ 488.445584] sd 6:0:0:0: [sdb] Write Protect is off
[ 488.445589] sd 6:0:0:0: [sdb] Mode Sense: 2b 00 10 08
[ 488.445856] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 488.483235] sdb: sdb1
[ 488.484156] sd 6:0:0:0: [sdb] Attached SCSI disk
když ho připojíš do USB 3 co se objeví v dmesg:
[ 1.818905] ACPI: Lid Switch [LID]
[ 1.818937] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
[ 1.818942] ACPI: Sleep Button [SLPB]
[ 1.818969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.818971] ACPI: Power Button [PWRF]
[ 1.872222] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.872224] ACPI: Thermal Zone [THRM] (31 C)
[ 1.872243] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.872248] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.872269] ERST: Table is not found!
[ 1.872271] GHES: HEST is not enabled!
[ 1.872288] ACPI: Battery Slot [BAT0] (battery absent)
[ 1.872328] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.922978] Linux agpgart interface v0.103
[ 1.923045] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.923313] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.924979] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.925086] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.926080] brd: module loaded
[ 1.926582] loop: module loaded
[ 1.926687] ahci 0000:00:1f.2: version 3.0
[ 1.926699] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.926743] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.942703] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.942706] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.942711] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.951020] scsi0 : ahci
[ 1.951086] scsi1 : ahci
[ 1.951147] scsi2 : ahci
[ 1.951201] scsi3 : ahci
[ 1.951257] scsi4 : ahci
[ 1.951311] scsi5 : ahci
[ 1.951467] ata1: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16100 irq 41
[ 1.951469] ata2: DUMMY
[ 1.951471] ata3: SATA max UDMA/133 abar m2048@0xf7a16000 port 0xf7a16200 irq 41
[ 1.951473] ata4: DUMMY
[ 1.951474] ata5: DUMMY
[ 1.951475] ata6: DUMMY
[ 1.951757] Fixed MDIO Bus: probed
[ 1.951771] tun: Universal TUN/TAP device driver, 1.6
[ 1.951772] tun: (C) 1999-2004 Max Krasnyansky
[ 1.951807] PPP generic driver version 2.4.2
[ 1.951876] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.951890] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.951905] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.951909] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.951943] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.951966] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.955854] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.955867] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7a18000
[ 1.970636] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.970747] hub 1-0:1.0: USB hub found
[ 1.970750] hub 1-0:1.0: 2 ports detected
[ 1.970795] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.970809] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.970812] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.970844] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.970864] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.974751] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.974764] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7a17000
[ 1.990609] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.990711] hub 2-0:1.0: USB hub found
[ 1.990714] hub 2-0:1.0: 2 ports detected
[ 1.990755] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.990764] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.990785] xhci_hcd 0000:00:14.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.990829] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.990832] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.990865] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.990948] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.990952] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7a00000
[ 1.990991] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.991079] xHCI xhci_add_endpoint called for root hub
[ 1.991081] xHCI xhci_check_bandwidth called for root hub
[ 1.991103] hub 3-0:1.0: USB hub found
[ 1.991111] hub 3-0:1.0: 4 ports detected
[ 1.991151] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.991179] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.991235] xHCI xhci_add_endpoint called for root hub
[ 1.991237] xHCI xhci_check_bandwidth called for root hub
[ 1.991252] hub 4-0:1.0: USB hub found
[ 1.991259] hub 4-0:1.0: 4 ports detected
[ 2.038593] usbcore: registered new interface driver libusual
[ 2.038623] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 2.040303] i8042: Detected active multiplexing controller, rev 1.1
[ 2.041230] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.041234] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.041240] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.041242] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.041244] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.041349] mousedev: PS/2 mouse device common for all mice
[ 2.041478] rtc_cmos 00:06: RTC can wake from S4
[ 2.041575] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 2.041603] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.041660] device-mapper: uevent: version 1.0.3
[ 2.041710] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.041800] cpuidle: using governor ladder
[ 2.041931] cpuidle: using governor menu
[ 2.041933] EFI Variables Facility v0.08 2004-May-17
[ 2.042074] TCP cubic registered
[ 2.042143] NET: Registered protocol family 10
[ 2.042431] NET: Registered protocol family 17
[ 2.042434] Registering the dns_resolver key type
[ 2.042538] PM: Hibernation image not present or could not be loaded.
[ 2.042546] registered taskstats version 1
[ 2.048804] Magic number: 13:37:29
[ 2.048901] rtc_cmos 00:06: setting system clock to 2013-01-23 13:00:43 UTC (1358946043)
[ 2.049524] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.049525] EDD information not available.
[ 2.075568] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[ 2.270280] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.270318] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.273124] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.273131] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.274264] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C0, 1.00, max UDMA/133
[ 2.276805] ata3.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.276813] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.277945] ata3.00: configured for UDMA/133
[ 2.281335] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.281596] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.281604] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.286256] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.291971] ata1.00: ATA-8: KINGSTON SV300S37A120G, 505ABBF0, max UDMA/133
[ 2.291977] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.301305] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.301521] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.301529] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.311943] ata1.00: configured for UDMA/133
[ 2.312183] scsi 0:0:0:0: Direct-Access ATA KINGSTON SV300S3 505A PQ: 0 ANSI: 5
[ 2.312325] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.312340] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 2.312627] sd 0:0:0:0: [sda] Write Protect is off
[ 2.312629] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.312823] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.313806] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C0 1.00 PQ: 0 ANSI: 5
[ 2.314038] sda: sda1 sda2 < sda5 >
[ 2.314518] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.315868] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.315872] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.316000] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.316060] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 2.317122] Freeing unused kernel memory: 924k freed
[ 2.317208] Write protecting the kernel read-only data: 12288k
[ 2.320433] Freeing unused kernel memory: 1604k freed
[ 2.322830] Freeing unused kernel memory: 1196k freed
[ 2.333790] udevd[106]: starting version 175
[ 2.377127] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 2.377148] r8169 0000:04:00.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.377184] r8169 0000:04:00.2: (unregistered net_device): unknown MAC, using family default
[ 2.377201] r8169 0000:04:00.2: setting latency timer to 64
[ 2.377293] r8169 0000:04:00.2: irq 43 for MSI/MSI-X
[ 2.377742] r8169 0000:04:00.2: eth0: RTL8168b/8111b at 0xffffc9000578a000, 30:85:a9:12:60:22, XID 08800880 IRQ 43
[ 2.377745] r8169 0000:04:00.2: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 2.391642] EXT4-fs (sda1): orphan cleanup on readonly fs
[ 2.392130] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6294417
[ 2.392335] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6294257
[ 2.392343] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 6294260
[ 2.393078] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4194341
[ 2.394069] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4204568
[ 2.394879] EXT4-fs (sda1): ext4_orphan_cleanup: deleting unreferenced inode 4197575
[ 2.395072] EXT4-fs (sda1): 6 orphan inodes deleted
[ 2.395074] EXT4-fs (sda1): recovery complete
[ 2.396521] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.418603] hub 1-1:1.0: USB hub found
[ 2.418733] hub 1-1:1.0: 6 ports detected
[ 2.525605] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2.529948] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.572745] udevd[421]: starting version 175
[ 2.573564] Adding 8269820k swap on /dev/sda5. Priority:-1 extents:1 across:8269820k SS
[ 2.582995] lp: driver loaded but no devices found
[ 2.619829] wmi: Mapper loaded
[ 2.625230] [drm] Initialized drm 1.1.0 20060810
[ 2.627003] nvidia: module license 'NVIDIA' taints kernel.
[ 2.627007] Disabling lock debugging due to kernel taint
[ 2.632771] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.632777] i915 0000:00:02.0: setting latency timer to 64
[ 2.651153] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.680431] type=1400 audit(1358946044.128:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=624 comm="apparmor_parser"
[ 2.680794] type=1400 audit(1358946044.128:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=624 comm="apparmor_parser"
[ 2.681009] type=1400 audit(1358946044.128:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=624 comm="apparmor_parser"
[ 2.682248] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 2.682253] nvidia 0000:01:00.0: power state changed by ACPI to D0
[ 2.682257] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[ 2.682264] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.682334] nvidia 0000:01:00.0: setting latency timer to 64
[ 2.682338] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 2.682708] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 310.14 Tue Oct 9 11:52:41 PDT 2012
[ 2.685920] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 2.686256] hub 2-1:1.0: USB hub found
[ 2.686431] hub 2-1:1.0: 6 ports detected
[ 2.710688] Refined TSC clocksource calibration: 2494.334 MHz.
[ 2.710693] Switching to clocksource tsc
[ 2.817069] cfg80211: Calling CRDA to update world regulatory domain
[ 2.823553] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 2.823557] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 2.823859] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 2.823863] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.823865] [drm] Driver supports precise vblank timestamp query.
[ 2.823927] [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions
[ 2.823961] [drm:intel_dsm_pci_probe] *ERROR* failed to get supported _DSM functions
[ 2.832342] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[ 2.832344] Copyright(c) 2003-2011 Intel Corporation
[ 2.832387] iwlwifi 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.832396] iwlwifi 0000:03:00.0: setting latency timer to 64
[ 2.832421] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 2.832423] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005794000
[ 2.832425] iwlwifi 0000:03:00.0: HW Revision ID = 0xC4
[ 2.832517] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[ 2.832552] iwlwifi 0000:03:00.0: Detected 2000 Series 2x2 BGN/BT, REV=0xC8
[ 2.832620] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 2.851388] iwlwifi 0000:03:00.0: device EEPROM VER=0x81c, CALIB=0x6
[ 2.851391] iwlwifi 0000:03:00.0: Device SKU: 0X150
[ 2.851392] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[ 2.851478] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 2.870500] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[ 2.933664] asus_wmi: ASUS WMI generic driver loaded
[ 2.933992] asus_wmi: Initialization: 0x1
[ 2.934032] asus_wmi: BIOS WMI version: 7.9
[ 2.934080] asus_wmi: SFUN value: 0x4a0877
[ 2.938458] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input4
[ 2.938520] init: failsafe main process (820) killed by TERM signal
[ 2.947347] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
[ 2.947598] Registered led device: phy0-led
[ 2.947626] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2.978575] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 2.987291] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 2.987295] cfg80211: World regulatory domain updated:
[ 2.987296] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.987299] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.987301] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.987304] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.987306] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.987308] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.992540] ppdev: user-space parallel port driver
[ 3.028767] Bluetooth: Core ver 2.16
[ 3.028902] NET: Registered protocol family 31
[ 3.028904] Bluetooth: HCI device and connection manager initialized
[ 3.028907] Bluetooth: HCI socket layer initialized
[ 3.028908] Bluetooth: L2CAP socket layer initialized
[ 3.028913] Bluetooth: SCO socket layer initialized
[ 3.032626] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.032630] Bluetooth: BNEP filters: protocol multicast
[ 3.036684] Bluetooth: RFCOMM TTY layer initialized
[ 3.036689] Bluetooth: RFCOMM socket layer initialized
[ 3.036691] Bluetooth: RFCOMM ver 1.11
[ 3.043843] asus_wmi: Backlight controlled by ACPI video driver
[ 3.045628] type=1400 audit(1358946044.496:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=936 comm="apparmor_parser"
[ 3.045949] type=1400 audit(1358946044.496:6): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=936 comm="apparmor_parser"
[ 3.055220] type=1400 audit(1358946044.504:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=962 comm="apparmor_parser"
[ 3.056904] type=1400 audit(1358946044.504:8): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=963 comm="apparmor_parser"
[ 3.058605] type=1400 audit(1358946044.508:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=963 comm="apparmor_parser"
[ 3.058811] type=1400 audit(1358946044.508:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=963 comm="apparmor_parser"
[ 3.090276] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 3.097893] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 3.125954] bbswitch: version 0.4.2
[ 3.125962] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[ 3.125971] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[ 3.126086] bbswitch: detected an Optimus _DSM function
[ 3.126093] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is on
[ 3.135662] init: alsa-restore main process (1027) terminated with status 19
[ 3.145288] nvidia 0000:01:00.0: PCI INT A disabled
[ 3.156619] bbswitch: disabling discrete graphics
[ 3.156762] bbswitch: Result of Optimus _DSM call: 01000059
[ 3.190679] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 3.218839] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 3.261099] pci 0000:01:00.0: power state changed by ACPI to D3
[ 3.296637] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input5
[ 3.365096] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S
[ 3.372682] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 3.465393] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.465619] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.477319] r8169 0000:04:00.2: eth0: link down
[ 3.477325] r8169 0000:04:00.2: eth0: link down
[ 3.477791] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.478017] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.488856] fbcon: inteldrmfb (fb0) is primary device
[ 3.488924] Console: switching to colour frame buffer device 170x48
[ 3.488943] fb0: inteldrmfb frame buffer device
[ 3.488944] drm: registered panic notifier
[ 3.489586] ACPI Warning: _BQC returned an invalid level (20110623/video-480)
[ 3.489745] acpi device:06: registered as cooling_device4
[ 3.489791] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:03/LNXVIDEO:00/input/input6
[ 3.490374] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 3.505513] ACPI Warning: _BQC returned an invalid level (20110623/video-480)
[ 3.505723] acpi device:40: registered as cooling_device5
[ 3.528805] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 3.528861] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.528907] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 3.528977] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 3.528984] mei 0000:00:16.0: setting latency timer to 64
[ 3.529049] mei 0000:00:16.0: irq 46 for MSI/MSI-X
[ 3.532750] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 3.532824] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X
[ 3.532850] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 3.544866] [drm] Changing LVDS panel from (+hsync, +vsync) to (-hsync, -vsync)
[ 4.087171] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 4.087232] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 4.087274] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 4.091087] HDMI: detected monitor IPS224 at connection type HDMI
[ 4.091089] HDMI: available speakers: FL/FR
[ 4.091092] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 4.094288] HDMI: detected monitor IPS224 at connection type HDMI
[ 4.094289] HDMI: available speakers: FL/FR
[ 4.094291] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 4.094383] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 4.094491] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 4.094550] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.187020] r8169 0000:04:00.2: eth0: link up
[ 5.187479] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.373115] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
[ 5.373172] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 5.562153] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 5.562213] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 5.861592] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 5.865092] HDMI: detected monitor IPS224 at connection type HDMI
[ 5.865094] HDMI: available speakers: FL/FR
[ 5.865096] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 7.879090] usb 3-1: device descriptor read/8, error -110
[ 12.992490] usb 3-1: device descriptor read/8, error -110
[ 13.208173] usb 3-1: new high-speed USB device number 3 using xhci_hcd
[ 13.208283] usb 3-1: Device not responding to set address.
[ 13.411988] usb 3-1: Device not responding to set address.
[ 13.615623] usb 3-1: device not accepting address 3, error -71
[ 13.727496] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[ 13.727605] usb 3-1: Device not responding to set address.
[ 13.931343] usb 3-1: Device not responding to set address.
[ 14.134944] usb 3-1: device not accepting address 4, error -71
[ 14.246828] usb 3-1: new high-speed USB device number 5 using xhci_hcd
[ 14.246943] usb 3-1: Device not responding to set address.
[ 14.450636] usb 3-1: Device not responding to set address.
[ 14.654275] usb 3-1: device not accepting address 5, error -71
[ 14.654309] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 14.766153] usb 3-3: new high-speed USB device number 6 using xhci_hcd
[ 14.784365] hub 3-3:1.0: USB hub found
[ 14.784618] hub 3-3:1.0: 4 ports detected
[ 14.858212] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 14.957999] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 14.958138] usbcore: registered new interface driver btusb
[ 15.025997] usb 1-1.3: new high-speed USB device number 4 using ehci_hcd
[ 15.187811] Linux video capture interface: v2.00
[ 15.188219] uvcvideo: Found UVC 1.00 device USB 2.0 UVC VGA WebCam (13d3:5710)
[ 15.195103] input: USB 2.0 UVC VGA WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input11
[ 15.195237] usbcore: registered new interface driver uvcvideo
[ 15.195239] USB Video Class driver (1.1.1)
[ 15.397291] eth0: no IPv6 routers present
[ 16.512189] usb 3-3.2: new low-speed USB device number 7 using xhci_hcd
[ 16.532998] usb 3-3.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 16.539983] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.2/3-3.2:1.0/input/input12
[ 16.540089] generic-usb 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:14.0-3.2/input0
[ 16.540100] usbcore: registered new interface driver usbhid
[ 16.540101] usbhid: USB HID core driver
[ 16.604053] usb 3-3.3: new low-speed USB device number 8 using xhci_hcd
[ 16.626414] usb 3-3.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 16.626418] usb 3-3.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 16.629146] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.0/input/input13
[ 16.629284] generic-usb 0003:1C4F:0026.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-3.3/input0
[ 16.632607] input: SIGMACHIP USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3.3/3-3.3:1.1/input/input14
[ 16.632738] generic-usb 0003:1C4F:0026.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-0000:00:14.0-3.3/input1
[ 22.315346] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=1
[ 22.315660] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 22.664047] HDMI hot plug event: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 22.664105] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 22.963468] HDMI status: Codec=3 Pin=6 Presence_Detect=1 ELD_Valid=1
[ 22.966963] HDMI: detected monitor IPS224 at connection type HDMI
[ 22.966965] HDMI: available speakers: FL/FR
[ 22.966967] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16 20 24
[ 477.136495] usb 3-3: USB disconnect, device number 6
[ 477.136502] usb 3-3.2: USB disconnect, device number 7
[ 477.256043] usb 3-3.3: USB disconnect, device number 8
[ 487.386711] usb 3-2: new high-speed USB device number 9 using xhci_hcd
[ 487.434560] xhci_hcd 0000:00:14.0: device LPM test failed, may disconnect and re-enumerate
[ 487.435036] usb 3-2: ep 0x8b - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 487.435041] usb 3-2: ep 0xa - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 487.439707] Initializing USB Mass Storage driver...
[ 487.439835] scsi6 : usb-storage 3-2:1.0
[ 487.440021] usbcore: registered new interface driver usb-storage
[ 487.440023] USB Mass Storage support registered.
[ 487.440198] usbcore: registered new interface driver uas
[ 488.439199] scsi 6:0:0:0: Direct-Access Zalman ZM-HE130 0201 PQ: 0 ANSI: 6
[ 488.440234] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 488.445257] sd 6:0:0:0: [sdb] 1465149167 512-byte logical blocks: (750 GB/698 GiB)
[ 488.445584] sd 6:0:0:0: [sdb] Write Protect is off
[ 488.445589] sd 6:0:0:0: [sdb] Mode Sense: 2b 00 10 08
[ 488.445856] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[ 488.483235] sdb: sdb1
[ 488.484156] sd 6:0:0:0: [sdb] Attached SCSI disk
[ 564.944251] cfg80211: Found new beacon on frequency: 2472 MHz (Ch 13) on phy0
[ 659.084571] usb 3-2: USB disconnect, device number 9
[ 659.087677] sd 6:0:0:0: [sdb] Synchronizing SCSI cache
[ 659.087754] sd 6:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 673.374062] hub 3-0:1.0: unable to enumerate USB device on port 1
[ 701.250012] usb 3-3: new high-speed USB device number 11 using xhci_hcd
[ 701.250133] usb 3-3: Device not responding to set address.
[ 701.453848] usb 3-3: Device not responding to set address.
[ 701.657459] usb 3-3: device not accepting address 11, error -71
[ 701.769313] usb 3-3: new high-speed USB device number 12 using xhci_hcd
[ 701.769415] usb 3-3: Device not responding to set address.
[ 701.973084] usb 3-3: Device not responding to set address.
[ 702.176793] usb 3-3: device not accepting address 12, error -71
[ 702.288672] usb 3-3: new high-speed USB device number 13 using xhci_hcd
[ 702.288800] usb 3-3: Device not responding to set address.
[ 702.492477] usb 3-3: Device not responding to set address.
[ 702.696121] usb 3-3: device not accepting address 13, error -71
[ 702.807996] usb 3-3: new high-speed USB device number 14 using xhci_hcd
[ 702.808129] usb 3-3: Device not responding to set address.
[ 703.011833] usb 3-3: Device not responding to set address.
[ 703.215388] usb 3-3: device not accepting address 14, error -71
[ 703.215436] hub 3-0:1.0: unable to enumerate USB device on port 3
Nemáš náhodou USB 3 zakázané v BIOSU (nevím zda to u tvého NT v biosu je).:
Bohužel to jsem nikde v biosu nenašel ,ale myslím že to tam ani není.
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.