Portál AbcLinuxu, 10. května 2025 05:30
title Ubuntu, kernel 2.6.12 root (hd0,0) kernel /boot/vmlinuz-2.6.12 root=/dev/hda1 ro quiet splash video=vesafb:1280x1024-32@75 savedefault boota restartoval PC. ale ouha konzole měla stále malé defaultní rozlišení. předtím než jsem užíval vesafb-png tak jsem zkoušel změnit rozlišení pomocí vesafb a do grubu ať jsem přidal vga=791 nevo vga=0x318 tak se vždy konzole nezobrazila.Byla jen černá obrazovka.Nevíte prosím včem dělám chybu?Děkuji
. Co tak nejaky log? Vypis? Co rika treba vypis dmesg? Melo by to byt nekde na zacatku toho vypisu .... [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes) [ 0.000000] Detected 451.286 MHz processor. [ 25.061980] Using tsc for high-res timesource [ 25.063263] Console: colour VGA+ 80x25 [ 25.064567] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.065290] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 25.101848] Memory: 191200k/196608k available (2045k kernel code, 4960k reserved, 775k data, 148k init, 0k highmem) [ 25.101866] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 25.102141] Calibrating delay loop... 882.68 BogoMIPS (lpj=441344) [ 25.120597] Security Framework v1.0.0 initialized [ 25.120623] SELinux: Disabled at boot. [ 25.120684] Mount-cache hash table entries: 512 [ 25.121047] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 25.121081] CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 25.121119] CPU: L1 I cache: 16K, L1 D cache: 16K [ 25.121131] CPU: L2 cache: 512K [ 25.121141] CPU serial number disabled. [ 25.121150] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 25.121175] CPU: Intel Pentium III (Katmai) stepping 03 [ 25.121192] Enabling fast FPU save and restore... done. [ 25.121203] Enabling unmasked SIMD FPU exception support... done. [ 25.121218] Checking 'hlt' instruction... OK. [ 25.126209] NET: Registered protocol family 16 ...působý to jako by se vesafb-tng vůbec nenačítal..rovnou tam skáče VGA+ 80x25 ....jo jinak se jedná o grafickou kartu NVidia-Geforce 3
quiet splashKdyz jsem se pokousel kdysi o fbsplash a zapomel jsem zadat cestu k initrd, tak my sla konsole klasicky na 640x480(nebo jaky je jeji default), apson myslim :-/, uz je to krapet dele, fbsplash mam rozjety cca na 3PC a pohoda jazz ..., dlouho uz jsem na to nekouk.
dmesg [4294667.296000] Linux version 2.6.12 (root@ubuntu) (gcc version 3.4.5 20051015 (prerelease) (Ubuntu 3.4.4-9)) #1 Thu Dec 22 20:23:12 CET 2005 [4294667.296000] BIOS-provided physical RAM map: [4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [4294667.296000] BIOS-e820: 0000000000100000 - 000000000c000000 (usable) [4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) [4294667.296000] 192MB LOWMEM available. [4294667.296000] On node 0 totalpages: 49152 [4294667.296000] DMA zone: 4096 pages, LIFO batch:1 [4294667.296000] Normal zone: 45056 pages, LIFO batch:31 [4294667.296000] HighMem zone: 0 pages, LIFO batch:1 [4294667.296000] DMI 2.2 present. [4294667.296000] Allocating PCI resources starting at 0c000000 (gap: 0c000000:f3ff0000) [4294667.296000] Built 1 zonelists [4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash [4294667.296000] Initializing CPU#0 [4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes) [ 0.000000] Detected 451.285 MHz processor. [ 25.259281] Using tsc for high-res timesource [ 25.260560] Console: colour VGA+ 80x25 [ 25.261854] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 25.262601] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 25.299197] Memory: 191200k/196608k available (2045k kernel code, 4960k reserved, 775k data, 148k init, 0k highmem) [ 25.299215] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 25.299490] Calibrating delay loop... 882.68 BogoMIPS (lpj=441344) [ 25.318230] Security Framework v1.0.0 initialized [ 25.318256] SELinux: Disabled at boot. [ 25.318317] Mount-cache hash table entries: 512 [ 25.318681] CPU: After generic identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 25.318715] CPU: After vendor identify, caps: 0387f9ff 00000000 00000000 00000000 00000000 00000000 00000000 [ 25.318753] CPU: L1 I cache: 16K, L1 D cache: 16K [ 25.318765] CPU: L2 cache: 512K [ 25.318775] CPU serial number disabled. [ 25.318785] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000 [ 25.318809] CPU: Intel Pentium III (Katmai) stepping 03 [ 25.318826] Enabling fast FPU save and restore... done. [ 25.318837] Enabling unmasked SIMD FPU exception support... done. [ 25.318852] Checking 'hlt' instruction... OK. [ 25.323840] NET: Registered protocol family 16 [ 25.340449] PCI: PCI BIOS revision 2.10 entry at 0xfb140, last bus=1 [ 25.340472] PCI: Using configuration type 1 [ 25.340484] mtrr: v2.0 (20020519) [ 25.341891] Linux Plug and Play Support v0.97 (c) Adam Belay [ 25.341939] PnPBIOS: Scanning system for PnP BIOS support... [ 25.342590] PnPBIOS: Found PnP BIOS installation structure at 0xc00fbd60 [ 25.342614] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xbd88, dseg 0xf0000[ 25.347946] PnPBIOS: 15 nodes reported by PnP BIOS; 15 recorded by driver [ 25.348342] PCI: Probing PCI hardware [ 25.348355] PCI: Probing PCI hardware (bus 00) [ 25.348503] PCI: Scanning bus 0000:00 [ 25.348545] PCI: Found 0000:00:00.0 [1106/0691] 000600 00 [ 25.348634] PCI: Calling quirk c01fdbf0 for 0000:00:00.0 [ 25.348646] PCI: Calling quirk c01fe170 for 0000:00:00.0 [ 25.348658] PCI: Calling quirk c0289660 for 0000:00:00.0 [ 25.348669] PCI: Calling quirk c0289a70 for 0000:00:00.0 [ 25.348702] PCI: Found 0000:00:01.0 [1106/8598] 000604 01 [ 25.348738] PCI: Calling quirk c01fdbf0 for 0000:00:01.0 [ 25.348749] PCI: Calling quirk c01fe170 for 0000:00:01.0 [ 25.348759] PCI: Calling quirk c0289660 for 0000:00:01.0 [ 25.348770] PCI: Calling quirk c0289a70 for 0000:00:01.0 [ 25.348804] PCI: Found 0000:00:07.0 [1106/0596] 000601 00 [ 25.348864] PCI: Calling quirk c01fdbf0 for 0000:00:07.0 [ 25.348875] PCI: Calling quirk c01fe170 for 0000:00:07.0 [ 25.348886] PCI: Calling quirk c0289660 for 0000:00:07.0 [ 25.348896] PCI: Calling quirk c0289a70 for 0000:00:07.0 [ 25.348923] PCI: Found 0000:00:07.1 [1106/0571] 000101 00 [ 25.348984] PCI: Calling quirk c01fdbf0 for 0000:00:07.1 [ 25.348995] PCI: Calling quirk c01fe170 for 0000:00:07.1 [ 25.349006] PCI: Calling quirk c0289660 for 0000:00:07.1 [ 25.349017] PCI: Calling quirk c0289a70 for 0000:00:07.1 [ 25.349048] PCI: Found 0000:00:07.2 [1106/3038] 000c03 00 [ 25.349140] PCI: Calling quirk c01fdbf0 for 0000:00:07.2 [ 25.349152] PCI: Calling quirk c01fe170 for 0000:00:07.2 [ 25.349162] PCI: Calling quirk c0289660 for 0000:00:07.2 [ 25.349173] PCI: Calling quirk c0289a70 for 0000:00:07.2 [ 25.349199] PCI: Found 0000:00:07.3 [1106/3050] 000600 00 [ 25.349259] PCI: Calling quirk c01fdbf0 for 0000:00:07.3 [ 25.349270] PCI: Calling quirk c01fe170 for 0000:00:07.3 [ 25.349281] PCI: Calling quirk c0289660 for 0000:00:07.3 [ 25.349291] PCI: Calling quirk c0289a70 for 0000:00:07.3 [ 25.349327] PCI: Found 0000:00:0b.0 [10ec/8029] 000200 00 [ 25.349387] PCI: Calling quirk c01fdbf0 for 0000:00:0b.0 [ 25.349398] PCI: Calling quirk c01fe170 for 0000:00:0b.0 [ 25.349409] PCI: Calling quirk c0289660 for 0000:00:0b.0 [ 25.349419] PCI: Calling quirk c0289a70 for 0000:00:0b.0 [ 25.349455] PCI: Found 0000:00:0d.0 [13f6/0111] 000401 00 [ 25.349556] PCI: Calling quirk c01fdbf0 for 0000:00:0d.0 [ 25.349567] PCI: Calling quirk c01fe170 for 0000:00:0d.0 [ 25.349578] PCI: Calling quirk c0289660 for 0000:00:0d.0 [ 25.349588] PCI: Calling quirk c0289a70 for 0000:00:0d.0 [ 25.349637] PCI: Fixups for bus 0000:00 [ 25.349651] PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 0 [ 25.349792] PCI: Scanning bus 0000:01 [ 25.349832] PCI: Found 0000:01:00.0 [10de/0201] 000300 00 [ 25.349906] PCI: Calling quirk c01fdbf0 for 0000:01:00.0 [ 25.349917] PCI: Calling quirk c01fe170 for 0000:01:00.0 [ 25.349928] PCI: Calling quirk c0289660 for 0000:01:00.0 [ 25.349939] PCI: Calling quirk c0289a70 for 0000:01:00.0 [ 25.349951] Boot video device is 0000:01:00.0 [ 25.350006] PCI: Fixups for bus 0000:01 [ 25.350024] PCI: Bus scan for 0000:01 returning with max=01 [ 25.350042] PCI: Scanning behind PCI bridge 0000:00:01.0, config 010100, pass 1 [ 25.350062] PCI: Bus scan for 0000:00 returning with max=01 [ 25.352286] PCI: Using IRQ router VIA [1106/0596] at 0000:00:07.0 [ 25.376200] audit: initializing netlink socket (disabled) [ 25.376224] audit: initialized [ 25.376653] VFS: Disk quotas dquot_6.5.1 [ 25.376747] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 25.376978] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au) [ 25.377006] devfs: boot_options: 0x0 [ 25.377166] Initializing Cryptographic API [ 25.377191] PCI: Calling quirk c01fdab0 for 0000:00:00.0 [ 25.377205] PCI: Calling quirk c01fdab0 for 0000:00:01.0 [ 25.377216] PCI: Calling quirk c01fd250 for 0000:00:07.0 [ 25.377225] Activating ISA DMA hang workarounds. [ 25.377236] PCI: Calling quirk c01fdab0 for 0000:00:07.0 [ 25.377247] PCI: Calling quirk c01fdab0 for 0000:00:07.1 [ 25.377259] PCI: Calling quirk c01fdab0 for 0000:00:07.2 [ 25.377270] PCI: Calling quirk c01fdab0 for 0000:00:07.3 [ 25.377281] PCI: Calling quirk c01fdab0 for 0000:00:0b.0 [ 25.377293] PCI: Calling quirk c01fdab0 for 0000:00:0d.0 [ 25.377304] PCI: Calling quirk c01fdab0 for 0000:01:00.0 [ 25.377671] vga16fb: initializing [ 25.377684] vga16fb: mapped to 0xc00a0000 [ 25.377863] fb0: VGA16 VGA frame buffer device [ 25.377926] isapnp: Scanning for PnP cards... [ 25.731238] isapnp: No Plug & Play device found [ 25.838443] Linux agpgart interface v0.101 (c) Dave Jones [ 25.838719] agpgart: Detected VIA Apollo Pro 133 chipset [ 25.847040] agpgart: AGP aperture is 64M @ 0xe0000000 [ 25.847475] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12 [ 25.849798] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 25.849879] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 25.849897] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled [ 25.850238] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.850641] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 25.864068] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 25.864804] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 25.865244] io scheduler noop registered [ 25.865298] io scheduler anticipatory registered [ 25.865320] io scheduler deadline registered [ 25.865370] io scheduler cfq registered [ 25.865585] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 25.865611] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 25.865725] VP_IDE: IDE controller at PCI slot 0000:00:07.1 [ 25.865751] PCI: Calling quirk c01fd960 for 0000:00:07.1 [ 25.865765] PCI: Via IRQ fixup for 0000:00:07.1, from 255 to 0 [ 25.865803] VP_IDE: chipset revision 6 [ 25.865813] VP_IDE: not 100% native mode: will probe irqs later [ 25.865846] VP_IDE: VIA vt82c596b (rev 12) IDE UDMA66 controller on pci0000:0 0:07.1 [ 25.865881] ide0: BM-DMA at 0xe000-0xe007, BIOS settings: hda:DMA, hdb:pi o [ 25.865923] ide1: BM-DMA at 0xe008-0xe00f, BIOS settings: hdc:pio, hdd:DM A [ 25.865986] Probing IDE interface ide0... [ 26.248923] hda: ST38421A, ATA DISK drive [ 26.861063] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 26.861256] Probing IDE interface ide1... [ 27.907384] hdd: LITE-ON LTR-40125S, ATAPI CD/DVD-ROM drive [ 27.958598] ide1 at 0x170-0x177,0x376 on irq 15 [ 27.959112] Probing IDE interface ide2... [ 28.471114] Probing IDE interface ide3... [ 28.983943] Probing IDE interface ide4... [ 29.495775] Probing IDE interface ide5... [ 30.007780] hda: max request size: 128KiB [ 30.008582] hda: 16498944 sectors (8447 MB) w/256KiB Cache, CHS=16368/16/63 [ 30.008632] hda: cache flushes not supported [ 30.008897] /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 > [ 30.049018] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache [ 30.049045] Uniform CD-ROM driver Revision: 3.20 [ 30.058638] mice: PS/2 mouse device common for all mice [ 30.058742] NET: Registered protocol family 2 [ 30.068813] IP: routing cache hash table of 2048 buckets, 16Kbytes [ 30.069435] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 30.069802] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 30.069989] TCP: Hash tables configured (established 8192 bind 8192) [ 30.070257] NET: Registered protocol family 8 [ 30.070268] NET: Registered protocol family 20 [ 30.070351] PM: Checking swsusp image. [ 30.070363] PM: Resume from disk failed. [ 30.094587] input: AT Translated Set 2 keyboard on isa0060/serio0 [ 30.113184] EXT3-fs: mounted filesystem with ordered data mode. [ 30.113259] VFS: Mounted root (ext3 filesystem) readonly. [ 30.114104] Freeing unused kernel memory: 148k freed [ 30.114217] kjournald starting. Commit interval 5 seconds [ 31.815170] NET: Registered protocol family 1 [ 33.702941] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 [ 40.244663] Adding 377488k swap on /dev/hda5. Priority:-1 extents:1 [ 40.656353] EXT3 FS on hda1, internal journal [ 44.084908] parport: PnPBIOS parport detected. [ 44.085109] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 44.177950] lp0: using parport0 (interrupt-driven). [ 44.824592] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 [ 49.607072] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@red hat.com [ 51.865584] cdrom: hdd: mrw address space DMA selected [ 56.931165] usbcore: registered new driver usbfs [ 56.948356] usbcore: registered new driver hub [ 57.002538] USB Universal Host Controller Interface driver v2.2 [ 57.007225] PCI: Calling quirk c01fd960 for 0000:00:07.2 [ 57.007270] uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [ 57.075471] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus numbe r 1 [ 57.075519] uhci_hcd 0000:00:07.2: irq 10, io base 0x0000e400 [ 57.088168] hub 1-0:1.0: USB hub found [ 57.088243] hub 1-0:1.0: 2 ports detected [ 57.423785] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 60.437314] ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker [ 60.437329] http://www.scyld.com/network/ne2k-pci.html [ 60.442058] PCI: Found IRQ 9 for device 0000:00:0b.0 [ 60.455042] eth0: RealTek RTL-8029 found at 0xe800, IRQ 9, 00:00:B4:C6:66:FC. [ 61.921246] usbcore: registered new driver cxacru [ 64.069952] cxacru 1-2:1.0: found firmware cxacru-fw.bin [ 64.458716] PCI: Found IRQ 11 for device 0000:00:0d.0 [ 68.554271] Real Time Clock Driver v1.12 [ 69.252252] Floppy drive(s): fd0 is 1.44M [ 69.330645] FDC 0 is a post-1991 82077 [ 82.521004] cxacru 1-2:1.0: ADSL line: attemtping to activate [ 87.518371] cxacru 1-2:1.0: ADSL line: down [ 92.515606] cxacru 1-2:1.0: ADSL line: attemtping to activate [ 98.514486] nvidia: module license 'NVIDIA' taints kernel. [ 98.572652] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7667 Fr i Jun 17 07:01:04 PDT 2005 [ 98.931536] NVRM: not using NVAGP, an AGPGART backend is loaded! [ 99.782924] NVRM: not using NVAGP, an AGPGART backend is loaded! [ 102.517386] cxacru 1-2:1.0: ADSL line: channel analysis [ 103.338842] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) [ 107.518324] cxacru 1-2:1.0: ADSL line: up (256 Kib/s down | 64 Kib/s up) [ 113.299821] NET: Registered protocol family 10 [ 113.300324] Disabled Privacy Extensions on device c0391de0(lo) [ 113.301052] IPv6 over IPv4 tunneling driver [ 114.516323] Bluetooth: Core ver 2.7 [ 114.516366] NET: Registered protocol family 31 [ 114.516376] Bluetooth: HCI device and connection manager initialized [ 114.516424] Bluetooth: HCI socket layer initialized [ 114.778800] Bluetooth: L2CAP ver 2.7 [ 114.778822] Bluetooth: L2CAP socket layer initialized [ 115.258615] Bluetooth: RFCOMM ver 1.5 [ 115.258665] Bluetooth: RFCOMM socket layer initialized [ 115.258707] Bluetooth: RFCOMM TTY layer initialized [ 120.309607] ip_tables: (C) 2000-2002 Netfilter core team [ 120.395663] ip_conntrack version 2.1 (1536 buckets, 12288 max) - 248 bytes pe r conntrack [ 121.237085] CSLIP: code copyright 1989 Regents of the University of Californi a [ 121.290710] PPP generic driver version 2.4.2 [ 123.641026] eth0: no IPv6 routers present [ 141.390291] cdrom: hdd: mrw address space DMA selected [ 141.754375] cdrom: hdd: mrw address space DMA selected [ 143.679494] ISO 9660 Extensions: Microsoft Joliet Level 3 [ 144.269563] ISOFS: changing to secondary root [ 366.273652] atkbd.c: Unknown key pressed (translated set 2, code 0xaa on isa0 060/serio0). [ 366.370562] atkbd.c: Unknown key released (translated set 2, code 0xaa on isa 0060/serio0). [ 366.273683] atkbd.c: Use 'setkeycodes e02a ***' to make it known. [ 366.370585] atkbd.c: Use 'setkeycodes e02a ***' to make it known...To vypuštění z grubu nemá vlivl..a tu cestu do initrd jsem nenastavoval,jelikož nevím jak..to by mohl být ten problém..prosím prosím jak nato?
[ 25.377671] vga16fb: initializing [ 25.377684] vga16fb: mapped to 0xc00a0000 [ 25.377863] fb0: VGA16 VGA frame buffer device.h.eh to bude ono:)
23.12.2005 19:37
mkinitrd -o /boot/initrd.img-2.6.12 2.6.12
potom by si mel upravit grub asi takhle
title Ubuntu, kernel 2.6.12 root (hd0,0) kernel /boot/vmlinuz-2.6.12 root=/dev/hda1 ro quiet splash video=vesafb-tng:1280x1024-32@75 initrd /boot/initrd.img-2.6.12 savedefault boot
skeletonix@ubuntu:~$ sudo mkinitrd -o /boot/initrd.img-2.6.12 2.6.12 sudo: mkinitrd: command not found skeletonix@ubuntu:~$...
apt-get initrd-tools
) :
Support for frame buffer device VESA VGA graphics support vesafb-tng (a nastavit treba 1024x768@75) Framebuffer Console support popr. jeste zvolit nejake fonty apod.Nastaveni grubu potom bude velice jednoduche, nic tam nepis
, zadne vga=XXX nebo append vesafb .... a melo by to jet ...
title Ubuntu, kernel 2.6.12 root (hd0,0) kernel /boot/vmlinuz-2.6.12 root=/dev/hda1 ro quiet splash savedefault boot..vše je přímo v jádře Ne joko moduly..a stále to nefunguje!
Nech to jen takto :
title Ubuntu, kernel 2.6.12 root (hd0,0) kernel /boot/vmlinuz-2.6.12 root=/dev/hda1 ro savedefault bootZdar Max
24.12.2005 21:53
title Gentoo GNU/Linux (2.6.13-ck2)
root (hd1,4)
kernel /2.6.13-ck2 root=/dev/hdb7 video=vesafb:1024x768-32@85savedefaulta
roa restart..a zase nic...
->Graphic support:
Support for frame buffer device *
Vesa VGA graph. supp. *
-->Console displaydriver s.:
Video mode selsetion support *
Select mode compatible fonts *
VGA 8x16 Fonts *
-->Logo configuration:
Standart B&W Lin. logo *
Standart 16 color L logo *
Standart 224 color L logo *
to je vše co mám nastaveno u grafiky. Přeinstaloval jsem NVidia drivry. do grubu jsem přidal vga=791 a konzole zůstává černá. Tady je výpis z dmesg: ... [ 26.424297] vesafb: framebuffer at 0xd8000000, mapped to 0xcc880000, using 3072k, total 65536k [ 26.424315] vesafb: mode is 1024x768x16, linelength=2048, pages=0 [ 26.424328] vesafb: protected mode interface info at c000:b790 [ 26.424339] vesafb: scrolling: redraw [ 26.424355] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 26.425727] fb0: VESA VGA frame buffer device [ 26.425870] isapnp: Scanning for PnP cards... [ 26.735669] isapnp: No Plug & Play device found [ 26.839059] Linux agpgart interface v0.101 (c) Dave Jones [ 26.839211] agpgart: Detected VIA Apollo Pro 133 chipset [ 26.847499] agpgart: AGP aperture is 64M @ 0xe0000000 ...Neví PROSÍM někdo čí to může být!Děkuji
parametr za jadro: vga=791 video=vesa:ywrap,mtrr
mozna je taky 791 moc :)
vesafb: framebuffer at 0xd8000000, mapped to 0xf0880000, using 1875k, total 65536k vesafb: mode is 800x600x16, linelength=1600, pages=67 vesafb: protected mode interface info at c000:5604 vesafb: pmi: set display start = c00c5698, set palette = c00c56e4 vesafb: pmi: ports = b810 b816 b854 b838 b83c b85c b800 b804 b8b0 b8b2 b8b4 vesafb: scrolling: ywrap using protected mode interface, yres_virtual=1200 vesafb: Truecolor: size=0:5:5:5, shift=0:10:5:0 vesafb: Mode is VGA compatible Console: switching to colour frame buffer device 100x37 fb0: VESA VGA frame buffer devicepouzivam to jen kvuli vetsi konzoli, jinak nemam vyuziti. v /boot/grub/grub.conf mam:
title=Gentoo Linux 2.6.14.rc6 --- Marek root (hd0,1) kernel /boot/linux-2.6.14-rc6/bzImage root=/dev/hda2 video=vesafb:ywrap,mtrr vga=0x313(vga=0x313 je 800x600 tusim v 32k barev.) v kernelu mam nastavene jen to nejzakladnejsi. nic vic. snad to k necemu pomuze.
30.12.2005 21:57
kozzi | skóre: 55
| blog: vse_o_vsem
| Pacman (Bratrušov)
title Ubuntu, kernel 2.6.12-10-386 root (hd1,0) kernel /boot/vmlinuz-2.6.12-10-386 root=/dev/hdb1 ro quiet splash vga=792 initrd /boot/initrd.img-2.6.12-10-386 savedefault boot
30.12.2005 22:10
kozzi | skóre: 55
| blog: vse_o_vsem
| Pacman (Bratrušov)
30.12.2005 23:24
kozzi | skóre: 55
| blog: vse_o_vsem
| Pacman (Bratrušov)
# # Graphics support # CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ARC is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y # CONFIG_FB_VESA_STD is not set CONFIG_FB_VESA_TNG=y CONFIG_FB_VESA_DEFAULT_MODE="1024x768-32@85" CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_CYBLA is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FONTS is not set CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y
<*> Support for frame buffer devices
<*> VESA VGA graphics support
VESA driver type (vesafb-tng) --->
(1280x1024@60) VESA default mode
Console display driver support --->
<*> Framebuffer Console support# # Graphics support # CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SOFT_CURSOR=y # CONFIG_FB_MACMODES is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set # CONFIG_FB_CIRRUS is not set # CONFIG_FB_PM2 is not set # CONFIG_FB_CYBER2000 is not set # CONFIG_FB_ASILIANT is not set # CONFIG_FB_IMSTT is not set # CONFIG_FB_VGA16 is not set CONFIG_FB_VESA=y CONFIG_VIDEO_SELECT=y # CONFIG_FB_HGA is not set # CONFIG_FB_NVIDIA is not set # CONFIG_FB_RIVA is not set # CONFIG_FB_I810 is not set # CONFIG_FB_INTEL is not set # CONFIG_FB_MATROX is not set # CONFIG_FB_RADEON_OLD is not set # CONFIG_FB_RADEON is not set # CONFIG_FB_ATY128 is not set # CONFIG_FB_ATY is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set # CONFIG_FB_VOODOO1 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_PM3 is not set # CONFIG_FB_GEODE is not set # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_VIRTUAL is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y # CONFIG_FONT_6x11 is not set # CONFIG_FONT_PEARL_8x8 is not set # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # # Logo configuration # CONFIG_LOGO=y CONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_BACKLIGHT_LCD_SUPPORT is not set..už budu mít chvilku času tak skusim to nedistribuční jádro..snad to pomůže!Dík všem!
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.