Dotaz: tv karta avc-2410

[Jan Drábek]

Mám adaptec avc-2410, původně koupenou pro windowsy. Teď se snažím tuto kartu rozchodit v linuxu. Našel jsem nejaký návod na http://ivtvdriver.org/index.php/Adaptec_AVC-2410 . Postupoval jsem podle návodu, jenže na konci při modprobeh se objevila chybička :

not an ivtv driver device not an ivtv driver device

Potom jsem zkoušel nejaký driver cs53l32a.c. boužel přeložení se nepovedlo <- mnoho chyb.

má někdo tuto kartu funkční? nebo ví jak na to?

Díky

Odpovědi

[CIJOML]

lspci vypise co?

[Jan Drábek]

02:03.0 Multimedia video controller: Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder (rev 01) jenom toto.

[CIJOML]

Tu kartu nemam, ale tenhle driver by mohl fungovat:

http://ivtvdriver.org/index.php/Main_Page

[Jan Drábek]

vím, jenze skonci na nejaky chybe. Zachvilku ji sem hodim.

[Jan Drábek]

vypis z dmesg

cs53l32a: Unknown symbol i2c_adapter_id #cs53l32a je modul jadra nebo ivtv

nekde dal je

ivtv:  ==================== START INIT IVTV ====================
ivtv:  version 0.4.3 (tagged release) loading
ivtv:  Linux version: 2.6.15.6 preempt PENTIUM4 gcc-4.0
ivtv:  In case of problems please include the debug info between
ivtv:  the START INIT IVTV and END INIT IVTV lines, along with
ivtv:  any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Adaptec VIDEOH! AVC-2410 card (cx23416 based)
ACPI: PCI Interrupt 0000:02:03.0[A] -> Link [LNKD] -> GSI 5 (level, low) -> IRQ 5
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tuner (ivtv): chip found at addr 0xc0 i2c-bus ivtv i2c driver #0
All bytes are equal. It is not a TEA5767
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=60]
tuner (ivtv): chip found at addr 0xd6 i2c-bus ivtv i2c driver #0
ivtv0: i2c attach to card #0 ok [client=(tuner unset), addr=6b]
saa7115: Unknown symbol capable
saa7115: Unknown symbol i2c_adapter_id
ivtv0: Failed to load module saa7115
ivtv0 warning: i2c client addr: 0x21 not found for command 0x8004646b!
msp3400: Unknown symbol i2c_adapter_id
ivtv0: Failed to load module msp3400
cs53l32a: Unknown symbol i2c_adapter_id
ivtv0: Failed to load module cs53l32a
tda9887 4-0043: (ivtv) chip found @ 0x86 (ivtv i2c driver #0)
ivtv0: i2c attach to card #0 ok [client=tda9887, addr=43]
ivtv0: Could not detect tuner standard, defaulting to NTSC.
ivtv0: Detected a TEA5767 radio tuner. Enabling radio support.
ivtv0: unable to open firmware v4l-cx2341x-enc.fw 
ivtv0: did you put the firmware in the hotplug firmware directory?
ivtv0 warning: failed loading encoder firmware
ivtv0 warning: Error loading firmware -3!
ivtv0: Error -3 initializing firmware.
ivtv0: Error -12 on initialization
ivtv: probe of 0000:02:03.0 failed with error -12
ivtv:  ====================  END INIT IVTV  ====================

kde by mohla v´yt hotplug firmware direcotry? (ivtv0: unable to open firmware v4l-cx2341x-enc.fw ) dekuji

[CIJOML]

Kdybys cetl poradne, tak to po tobe chce stahnout firmware:

ivtv0: unable to open firmware v4l-cx2341x-enc.fw 
ivtv0: did you put the firmware in the hotplug firmware directory?

[Jan Drábek]

cist uz davno umim! nahral jsem do /usr/lib/hotplug/firmware nebo /lib/modules/ ale stejne bez uspechu.

[CIJOML]

2005-11-12 ivtv unstable version 0.5.0 released (ChangeLog). All supporting modules have been moved to the video4linux CVS repository (www.linuxtv.org), leaving only the ivtv driver itself.

Zkus teda stahnout to CVS