Dotaz: MP3 přehrávač iCool

[mirekh2o]

Ahoj všichni,
potřebuju poradit, mam přehrávač Emgeton iCool Teenage 256Mb. Je to přehrávač s interní pamětí 256Mb a čtečkou na SD/MMC karty (mam tam SD 1Gb ). Ve widlich se mi to připojí jako dva odlišné diskové zařízení (interní + karta) ,ale v mem Gentoo linuxu mi jde připojit pouze interní paměť ,připojuji ji přes "mount /dev/sda1 /mnt/flash". Ale když chci připojit i kartu tak sem zkoušel ("mount /dev/sda2 /mnt/flash2", "mount /dev/sdb1 /mnt/flash2".."mount /dev/sdbn /mnt/flash2") a nejde to ,píše to "xxx není platným blokovým zařízením"

Výpis z usbview:
USB 2.0 Hi-Speed Audio Player
Manufacturer: DigitFAB
Serial Number: 0002F68C32990C8F
Speed: 12Mb/s (full)
USB Version: 1.10
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 066f
Product Id: 8004
Revision Number: 10.01

Config Number: 1
Number of Interfaces: 1
Attributes: 80
MaxPower Needed: 100mA

Interface Number: 0
Name: usb-storage
Alternate Number: 0
Class: 08(stor.)
Sub Class: 6
Protocol: 50
Number of Endpoints: 2

Endpoint Address: 81
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms

Endpoint Address: 02
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms

Odpovědi

[Pavel Stárek]

Podle počtu 2 endpoints se to jeví, jako že by je to mohlo umět oboje. Ještě je dobré sem poslat výstup příkazu dmesg po zapojení přehrávače do USB.

[mirekh2o]

[ 873.959734] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 874.689506] usb-storage: USB Mass Storage device detected
[ 874.689593] usb-storage: -- associate_dev
[ 874.689598] usb-storage: Vendor: 0x066f, Product: 0x8004, Revision: 0x1001
[ 874.689601] usb-storage: Interface Subclass: 0x06, Protocol: 0x50
[ 874.689613] usb-storage: Transport: Bulk
[ 874.689615] usb-storage: Protocol: Transparent SCSI
[ 874.689639] scsi0 : SCSI emulation for USB Mass Storage devices
[ 874.689717] usb-storage: *** thread sleeping.
[ 874.690098] usb-storage: device found at 2
[ 874.690103] usb-storage: waiting for device to settle before scanning


A pak ještě po chvíli se tam objeví:
transfer result 0x0
[ 880.330377] usb-storage: Attempting to get CSW...
[ 880.330380] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.331353] usb-storage: Status code 0; transferred 13/13
[ 880.331357] usb-storage: -- transfer complete
[ 880.331359] usb-storage: Bulk status result = 0
[ 880.331362] usb-storage: Bulk Status S 0x53425355 T 0x10 R 0 Stat 0x0
[ 880.331365] usb-storage: scsi cmd done, result=0x0
[ 880.331369] usb-storage: *** thread sleeping.
[ 880.331599] usb-storage: queuecommand called
[ 880.331609] usb-storage: *** thread awakened.
[ 880.331613] usb-storage: Command READ_10 (10 bytes)
[ 880.331614] usb-storage: 28 00 00 07 b1 f0 00 00 08 00
[ 880.331622] usb-storage: Bulk Command S 0x43425355 T 0x11 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 880.331626] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.332354] usb-storage: Status code 0; transferred 31/31
[ 880.332357] usb-storage: -- transfer complete
[ 880.332359] usb-storage: Bulk command transfer result=0
[ 880.332363] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 880.337342] usb-storage: Status code 0; transferred 4096/4096
[ 880.337345] usb-storage: -- transfer complete
[ 880.337347] usb-storage: Bulk data transfer result 0x0
[ 880.337349] usb-storage: Attempting to get CSW...
[ 880.337351] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.338344] usb-storage: Status code 0; transferred 13/13
[ 880.338346] usb-storage: -- transfer complete
[ 880.338348] usb-storage: Bulk status result = 0
[ 880.338351] usb-storage: Bulk Status S 0x53425355 T 0x11 R 0 Stat 0x0
[ 880.338355] usb-storage: scsi cmd done, result=0x0
[ 880.338357] usb-storage: *** thread sleeping.
[ 880.338431] usb-storage: queuecommand called
[ 880.338440] usb-storage: *** thread awakened.
[ 880.338443] usb-storage: Command READ_10 (10 bytes)
[ 880.338445] usb-storage: 28 00 00 07 b0 70 00 00 08 00
[ 880.338453] usb-storage: Bulk Command S 0x43425355 T 0x12 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 880.338456] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.339346] usb-storage: Status code 0; transferred 31/31
[ 880.339350] usb-storage: -- transfer complete
[ 880.339352] usb-storage: Bulk command transfer result=0
[ 880.339355] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 880.344369] usb-storage: Status code 0; transferred 4096/4096
[ 880.344374] usb-storage: -- transfer complete
[ 880.344377] usb-storage: Bulk data transfer result 0x0
[ 880.344379] usb-storage: Attempting to get CSW...
[ 880.344382] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.345339] usb-storage: Status code 0; transferred 13/13
[ 880.345342] usb-storage: -- transfer complete
[ 880.345344] usb-storage: Bulk status result = 0
[ 880.345347] usb-storage: Bulk Status S 0x53425355 T 0x12 R 0 Stat 0x0
[ 880.345352] usb-storage: scsi cmd done, result=0x0
[ 880.345356] usb-storage: *** thread sleeping.
[ 880.345490] usb-storage: queuecommand called
[ 880.345502] usb-storage: *** thread awakened.
[ 880.345505] usb-storage: Command READ_10 (10 bytes)
[ 880.345507] usb-storage: 28 00 00 00 00 28 00 00 08 00
[ 880.345516] usb-storage: Bulk Command S 0x43425355 T 0x13 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 880.345519] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.346341] usb-storage: Status code 0; transferred 31/31
[ 880.346345] usb-storage: -- transfer complete
[ 880.346347] usb-storage: Bulk command transfer result=0
[ 880.346350] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 880.351351] usb-storage: Status code 0; transferred 4096/4096
[ 880.351356] usb-storage: -- transfer complete
[ 880.351358] usb-storage: Bulk data transfer result 0x0
[ 880.351360] usb-storage: Attempting to get CSW...
[ 880.351363] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.352334] usb-storage: Status code 0; transferred 13/13
[ 880.352337] usb-storage: -- transfer complete
[ 880.352339] usb-storage: Bulk status result = 0
[ 880.352341] usb-storage: Bulk Status S 0x53425355 T 0x13 R 0 Stat 0x0
[ 880.352345] usb-storage: scsi cmd done, result=0x0
[ 880.352348] usb-storage: *** thread sleeping.
[ 880.352484] usb-storage: queuecommand called
[ 880.352497] usb-storage: *** thread awakened.
[ 880.352500] usb-storage: Command READ_10 (10 bytes)
[ 880.352502] usb-storage: 28 00 00 00 00 30 00 00 40 00
[ 880.352510] usb-storage: Bulk Command S 0x43425355 T 0x14 L 32768 F 128 Trg 0 LUN 0 CL 10
[ 880.352513] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.353361] usb-storage: Status code 0; transferred 31/31
[ 880.353366] usb-storage: -- transfer complete
[ 880.353368] usb-storage: Bulk command transfer result=0
[ 880.353372] usb-storage: usb_stor_bulk_transfer_sglist: xfer 32768 bytes, 8 entries
[ 880.386330] usb-storage: Status code 0; transferred 32768/32768 [ 880.386336] usb-storage: -- transfer complete
[ 880.386338] usb-storage: Bulk data transfer result 0x0
[ 880.386340] usb-storage: Attempting to get CSW...
[ 880.386343] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.387318] usb-storage: Status code 0; transferred 13/13
[ 880.387321] usb-storage: -- transfer complete
[ 880.387323] usb-storage: Bulk status result = 0
[ 880.387326] usb-storage: Bulk Status S 0x53425355 T 0x14 R 0 Stat 0x0
[ 880.387330] usb-storage: scsi cmd done, result=0x0
[ 880.387334] usb-storage: *** thread sleeping.
[ 880.387475] usb-storage: queuecommand called
[ 880.387486] usb-storage: *** thread awakened.
[ 880.387490] usb-storage: Command READ_10 (10 bytes)
[ 880.387492] usb-storage: 28 00 00 00 07 f0 00 00 10 00
[ 880.387500] usb-storage: Bulk Command S 0x43425355 T 0x15 L 8192 F 128 Trg 0 LUN 0 CL 10
[ 880.387503] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.388323] usb-storage: Status code 0; transferred 31/31
[ 880.388326] usb-storage: -- transfer complete
[ 880.388328] usb-storage: Bulk command transfer result=0
[ 880.388332] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 880.397325] usb-storage: Status code 0; transferred 8192/8192
[ 880.397330] usb-storage: -- transfer complete
[ 880.397333] usb-storage: Bulk data transfer result 0x0
[ 880.397334] usb-storage: Attempting to get CSW...
[ 880.397337] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.398310] usb-storage: Status code 0; transferred 13/13
[ 880.398312] usb-storage: -- transfer complete
[ 880.398314] usb-storage: Bulk status result = 0
[ 880.398317] usb-storage: Bulk Status S 0x53425355 T 0x15 R 0 Stat 0x0
[ 880.398321] usb-storage: scsi cmd done, result=0x0
[ 880.398325] usb-storage: *** thread sleeping.
[ 880.398502] usb-storage: queuecommand called
[ 880.398514] usb-storage: *** thread awakened.
[ 880.398517] usb-storage: Command READ_10 (10 bytes)
[ 880.398519] usb-storage: 28 00 00 02 86 98 00 00 10 00
[ 880.398527] usb-storage: Bulk Command S 0x43425355 T 0x16 L 8192 F 128 Trg 0 LUN 0 CL 10
[ 880.398530] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.399315] usb-storage: Status code 0; transferred 31/31
[ 880.399319] usb-storage: -- transfer complete
[ 880.399321] usb-storage: Bulk command transfer result=0
[ 880.399325] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 880.408348] usb-storage: Status code 0; transferred 8192/8192
[ 880.408352] usb-storage: -- transfer complete
[ 880.408355] usb-storage: Bulk data transfer result 0x0
[ 880.408357] usb-storage: Attempting to get CSW...
[ 880.408360] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.409333] usb-storage: Status code 0; transferred 13/13
[ 880.409339] usb-storage: -- transfer complete
[ 880.409341] usb-storage: Bulk status result = 0
[ 880.409344] usb-storage: Bulk Status S 0x53425355 T 0x16 R 0 Stat 0x0
[ 880.409348] usb-storage: scsi cmd done, result=0x0
[ 880.409353] usb-storage: *** thread sleeping.
[ 880.409473] usb-storage: queuecommand called
[ 880.409484] usb-storage: *** thread awakened.
[ 880.409487] usb-storage: Command READ_10 (10 bytes)
[ 880.409489] usb-storage: 28 00 00 00 01 80 00 00 10 00
[ 880.409497] usb-storage: Bulk Command S 0x43425355 T 0x17 L 8192 F 128 Trg 0 LUN 0 CL 10
[ 880.409500] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.410306] usb-storage: Status code 0; transferred 31/31
[ 880.410310] usb-storage: -- transfer complete
[ 880.410312] usb-storage: Bulk command transfer result=0
[ 880.410315] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 880.419298] usb-storage: Status code 0; transferred 8192/8192
[ 880.419304] usb-storage: -- transfer complete
[ 880.419306] usb-storage: Bulk data transfer result 0x0
[ 880.419308] usb-storage: Attempting to get CSW...
[ 880.419310] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.420306] usb-storage: Status code 0; transferred 13/13
[ 880.420312] usb-storage: -- transfer complete
[ 880.420314] usb-storage: Bulk status result = 0
[ 880.420317] usb-storage: Bulk Status S 0x53425355 T 0x17 R 0 Stat 0x0
[ 880.420320] usb-storage: scsi cmd done, result=0x0
[ 880.420324] usb-storage: *** thread sleeping.
[ 880.420443] usb-storage: queuecommand called
[ 880.420457] usb-storage: *** thread awakened.
[ 880.420460] usb-storage: Command READ_10 (10 bytes)
[ 880.420462] usb-storage: 28 00 00 04 98 c8 00 00 10 00
[ 880.420470] usb-storage: Bulk Command S 0x43425355 T 0x18 L 8192 F 128 Trg 0 LUN 0 CL 10
[ 880.420473] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.421295] usb-storage: Status code 0; transferred 31/31
[ 880.421299] usb-storage: -- transfer complete
[ 880.421301] usb-storage: Bulk command transfer result=0
[ 880.421304] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 880.430323] usb-storage: Status code 0; transferred 8192/8192
[ 880.430328] usb-storage: -- transfer complete
[ 880.430330] usb-storage: Bulk data transfer result 0x0
[ 880.430332] usb-storage: Attempting to get CSW...
[ 880.430335] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 byte
[ 880.431291] usb-storage: Status code 0; transferred 13/13
[ 880.431294] usb-storage: -- transfer complete
[ 880.431296] usb-storage: Bulk status result = 0
[ 880.431298] usb-storage: Bulk Status S 0x53425355 T 0x18 R 0 Stat 0x0
[ 880.431302] usb-storage: scsi cmd done, result=0x0
[ 880.431306] usb-storage: *** thread sleeping.
[ 880.431420] usb-storage: queuecommand called
[ 880.431432] usb-storage: *** thread awakened.
[ 880.431436] usb-storage: Command READ_10 (10 bytes)
[ 880.431438] usb-storage: 28 00 00 00 02 90 00 00 08 00
[ 880.431446] usb-storage: Bulk Command S 0x43425355 T 0x19 L 4096 F 128 Trg 0 LUN 0 CL 10
[ 880.431449] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.432288] usb-storage: Status code 0; transferred 31/31
[ 880.432292] usb-storage: -- transfer complete
[ 880.432294] usb-storage: Bulk command transfer result=0
[ 880.432297] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 880.437301] usb-storage: Status code 0; transferred 4096/4096
[ 880.437305] usb-storage: -- transfer complete
[ 880.437308] usb-storage: Bulk data transfer result 0x0
[ 880.437309] usb-storage: Attempting to get CSW...
[ 880.437312] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.438282] usb-storage: Status code 0; transferred 13/13
[ 880.438284] usb-storage: -- transfer complete
[ 880.438286] usb-storage: Bulk status result = 0
[ 880.438289] usb-storage: Bulk Status S 0x53425355 T 0x19 R 0 Stat 0x0
[ 880.438292] usb-storage: scsi cmd done, result=0x0
[ 880.438296] usb-storage: *** thread sleeping.
[ 880.438406] usb-storage: queuecommand called
[ 880.438416] usb-storage: *** thread awakened.
[ 880.438419] usb-storage: Command READ_10 (10 bytes)
[ 880.438421] usb-storage: 28 00 00 06 97 c0 00 00 10 00
[ 880.438429] usb-storage: Bulk Command S 0x43425355 T 0x1a L 8192 F 128 Trg 0 LUN 0 CL 10
[ 880.438432] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.439285] usb-storage: Status code 0; transferred 31/31
[ 880.439289] usb-storage: -- transfer complete
[ 880.439291] usb-storage: Bulk command transfer result=0
[ 880.439295] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 880.448310] usb-storage: Status code 0; transferred 8192/8192
[ 880.448316] usb-storage: -- transfer complete
[ 880.448318] usb-storage: Bulk data transfer result 0x0
[ 880.448320] usb-storage: Attempting to get CSW...
[ 880.448324] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.449323] usb-storage: Status code 0; transferred 13/13
[ 880.449328] usb-storage: -- transfer complete
[ 880.449330] usb-storage: Bulk status result = 0
[ 880.449333] usb-storage: Bulk Status S 0x53425355 T 0x1a R 0 Stat 0x0
[ 880.449338] usb-storage: scsi cmd done, result=0x0
[ 880.449342] usb-storage: *** thread sleeping.
[ 880.449958] usb-storage: queuecommand called
[ 880.449972] usb-storage: *** thread awakened.
[ 880.449975] usb-storage: Command READ_10 (10 bytes)
[ 880.449978] usb-storage: 28 00 00 00 03 88 00 00 10 00
[ 880.449986] usb-storage: Bulk Command S 0x43425355 T 0x1b L 8192 F 128 Trg 0 LUN 0 CL 10
[ 880.449989] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.450283] usb-storage: Status code 0; transferred 31/31
[ 880.450286] usb-storage: -- transfer complete
[ 880.450288] usb-storage: Bulk command transfer result=0
[ 880.450292] usb-storage: usb_stor_bulk_transfer_sglist: xfer 8192 bytes, 2 entries
[ 880.459285] usb-storage: Status code 0; transferred 8192/8192
[ 880.459289] usb-storage: -- transfer complete
[ 880.459291] usb-storage: Bulk data transfer result 0x0
[ 880.459293] usb-storage: Attempting to get CSW...
[ 880.459296] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.460274] usb-storage: Status code 0; transferred 13/13
[ 880.460280] usb-storage: -- transfer complete
[ 880.460282] usb-storage: Bulk status result = 0
[ 880.460284] usb-storage: Bulk Status S 0x53425355 T 0x1b R 0 Stat 0x0
[ 880.460288] usb-storage: scsi cmd done, result=0x0
[ 880.460292] usb-storage: *** thread sleeping.
[ 880.460399] usb-storage: queuecommand called
[ 880.460409] usb-storage: *** thread awakened.
[ 880.460412] usb-storage: Command READ_10 (10 bytes)
[ 880.460413] usb-storage: 28 00 00 00 07 e8 00 00 08 00
[ 880.460422] usb-storage: Bulk Command S 0x43425355 T 0x1c L 4096 F 128 Trg 0 LUN 0 CL 10
[ 880.460425] usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes
[ 880.461267] usb-storage: Status code 0; transferred 31/31
[ 880.461270] usb-storage: -- transfer complete
[ 880.461272] usb-storage: Bulk command transfer result=0
[ 880.461275] usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries
[ 880.466259] usb-storage: Status code 0; transferred 4096/4096
[ 880.466262] usb-storage: -- transfer complete
[ 880.466264] usb-storage: Bulk data transfer result 0x0
[ 880.466265] usb-storage: Attempting to get CSW...
[ 880.466268] usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes
[ 880.467265] usb-storage: Status code 0; transferred 13/13
[ 880.467267] usb-storage: -- transfer complete
[ 880.467269] usb-storage: Bulk status result = 0
[ 880.467272] usb-storage: Bulk Status S 0x53425355 T 0x1c R 0 Stat 0x0
[ 880.467275] usb-storage: scsi cmd done, result=0x0
[ 880.467277] usb-storage: *** thread sleeping.

[Pavel Stárek]

Takže u mě ten výstup z dmesg vypadá takto:

usb 1-1: new full speed USB device using uhci_hcd and address 2
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
  Vendor: OTi       Model: Flash Disk        Rev: 1.11
  Type:   Direct-Access                      ANSI SCSI revision: 02
SCSI device sda: 516096 512-byte hdwr sectors (264 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 516096 512-byte hdwr sectors (264 MB)
sda: Write Protect is off
sda: Mode Sense: 03 00 00 00
sda: assuming drive cache: write through
 sda: sda1
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
usb-storage: device scan complete

první tučně označená část výpisu ukazuje, že se USB subsystému povedlo rozpoznat připojený flash disk a scsi subsystém si ho přiřadil jako zařízení sda. Druhý tučně označený řádek ukazuje, že byl nalezen primární oddíl na zařízení sda.

Podle tvého výpisu to vypadá, že kernel nerozpoznal ten přehrávač a (podle mne) jediné řešení je upgrade kernelu. Taky je možné, že kernel který používáš, nemá zkompilovány všechny potřebné moduly.

[Pavel Stárek]

Sem se zase upsal (nečetl jsem znovu původní příspěvek). Samozřejmě že ho rozpozná, ale jen tu interní paměť (jak píšeš), ale asi nerozpozná tu přídavnou.

[mirekh2o]

A nevíš jak mam tu příd. kartu zprovoznit ?

[gf]

zdravim,

0) tise budu predpokladat nejnovejsi kernel ci nejaky rozumne novy. to je v pripade nejakych exotickych a atypickych kousku obcas nutnost.

1) zkuste se mrknout kam je namapovan dalsi disk:

fdisk -l /dev/sd{a..z}

2) SD/MMC karta predpokladam chodi, ozkouset v nejake ctectce

3) podpora usb-storage, usbhid a podobne v kernelu predopkladam mate

4) usb devices database - tam jsem toho moc/nic nenasel pripadne zadejte zaznam.

5) linux.usb.devel nebo linux.usb.users konfera - minimalne se podivat zbezne na poslednich x-1000 hlavicek v newsech, zda to jiz nekdo neresil.

6) je mozne, ze to druhe zarizeni je vyrobcem nejak zbastlene oproti specifikaci. anebo jede na spesl protokolu(?). tudiz dat pokec anglicky s vyvojari, kteri mohou doplnit nejake quirky do unusual_devs.h a muze to jet. pripadne si doplnte sam. ono tam par prehravacu jiz par je. toto je ale spise pro pripad, ze se v tom chcete opravdu hrabat.

7) nekdy zabere to ozkouset, co to udela bez podpory ehci-hcd. zda to neco najde. jede to rychlostne pomalu, ale vite, ze to jede a pak se da delat neco dal.

bye gf

[mirekh2o]

výpis z fdisku:
Disk /dev/sda: 258 MB, 258211840 bytes
197 heads, 40 sectors/track, 64 cylinders
Units = cylindry of 7880 * 512 = 4034560 bytes

Zařízení Boot Start End Blocks Id System
/dev/sda1 * 1 64 252140 b W95 FAT32

[Pavel Stárek]

Hmm, tak to skutečně rozpozná jen tu interní paměť. Myslím si že k tvé smůle platí bod 6 u Goldenfishovi odpovědi.

[mirekh2o]

Vyřešil sem to jinak ,polo-rozchodil sem čtečku karet ,ale nejde mi na ní zapsat ,číst v poho, ale když tam chci třeba jenom vytv. adr. tak mi to kopne "Není volné místo" i pod rootem. nevíte co by stim mohlo bejt ?

[gf]

zdravim,

zalezi, co to je za ctecku ?

usb ? integrovana TI nebo Ricoh ? (lspci nebo lsusb od konkretniho zarizeni).

jake mas jadro (uname -a) ?

usb ctecka mi chodi v pohode.

volne misto - prikaz df a zkontrolovat.

ne -li pokud ti nejake zarizeni zmrsi filesystem, tak to bude obcas delat problemy.

ono taktez muze byt problem v tom, ze okolo ctecek s TI chipy je dost bourlivy vyvoj. takze to chce minimalne novy kernel - at jiz distribucni nebo zkompilovany. klidne 2.6.16.x . ne -li ze pred par hodinami vysla 2.6.17.

pripadne se ozvi mi na icq, at tu neni vetsi navstevnost nez v blogach...... jabber mi ted nejak zase nejede.

gf (icq: 108040009)