wrap a usb

Zdar, pokousim se rozchodit usb na wrapu. Jadro 2.6.16, bios v1.11, usb kit z http://www.pcengines.ch/wrusb.htm.

lspci:

00:00.0 Host bridge: Cyrix Corporation PCI Master
00:0e.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
00:0f.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
00:10.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
00:12.0 ISA bridge: National Semiconductor Corporation: Unknown device 0510
00:12.1 Bridge: National Semiconductor Corporation: Unknown device 0511
00:12.2 IDE interface: National Semiconductor Corporation SCx200 IDE (rev 01)
00:12.3 Multimedia audio controller: National Semiconductor Corporation SCx200 Audio
00:12.5 Bridge: National Semiconductor Corporation: Unknown device 0515

dmesg:

ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core

Kdyz jsem zkusil usb veci udelat jako moduly, po startu se zavedly sami (takze tam usb je pritomno?)

Kdyz ale pripojim treba usb-serial konvertor, nenadetekuje se a ani kdyz zavedu pl2303 rucne, zarizeni ttyUSB0 se nevytvori.

cat /boot/config | grep USB | grep "=y"

CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SERIAL=y
CONFIG_USB_SERIAL_GENERIC=y

Je treba jeste nejaka jina volba v kernelu do wrapu nebo treba upgrade biosu atd?

Diky

Dotaz: wrap a usb

Odpovědi