Dotaz: LCD a ovladace

[marek@ubuntu]

Ahojte....Nahodil som si Ubuntu 6.10.Islo vsetko super az do vtedy ked som nahodil ovladace od ATI...Robil som to asi 100krat ale na CRT-cku a vzdy uspesne..A teraz ked sa mam prihlasit monitor vypne..Mam monitor pripojeni cez DVI..Vypis xorgu: vypis xorgu

# /etc/X11/xorg.conf (xorg X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the /etc/X11/xorg.conf manual page. # (Type "man /etc/X11/xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout" Identifier "Default Layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" InputDevice "stylus" "SendCoreEvents" InputDevice "cursor" "SendCoreEvents" InputDevice "eraser" "SendCoreEvents" EndSection

Section "Files"

# path to defoma fonts FontPath "/usr/share/X11/fonts/misc" FontPath "/usr/share/X11/fonts/cyrillic" FontPath "/usr/share/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/X11/fonts/Type1" FontPath "/usr/share/X11/fonts/100dpi" FontPath "/usr/share/X11/fonts/75dpi" FontPath "/usr/share/fonts/X11/misc" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection

Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection

Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc105" Option "XkbLayout" "sk" Option "XkbOptions" "lv3:ralt_switch" EndSection

Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ExplorerPS/2" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "true" EndSection

Section "InputDevice"

# /dev/input/event # for USB Identifier "stylus" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "stylus" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection

Section "InputDevice"

# /dev/input/event # for USB Identifier "eraser" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "eraser" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection

Section "InputDevice"

# /dev/input/event # for USB Identifier "cursor" Driver "wacom" Option "Device" "/dev/wacom" # Change to Option "Type" "cursor" Option "ForceDevice" "ISDV4" # Tablet PC ONLY EndSection

Section "Monitor" Identifier "B71A" Option "DPMS" EndSection

Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" # 1024x768 @ 70.00 Hz (GTF) hsync: 56.00 kHz; pclk: 76.16 MHz Modeline "1024x768_70.00" 76.16 1024 1080 1192 1360 768 769 772 800 -HSync +Vsync

EndSection

Section "Device" Identifier "ATI Technologies, Inc. RV350 AP [Radeon 9600]" Driver "ati" BusID "PCI:2:0:0" EndSection

Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" Option "VideoOverlay" "on" Option "OpenGLOverlay" "off" EndSection

Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. RV350 AP [Radeon 9600]" Monitor "B71A" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection EndSection

Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

Section "DRI" Mode 0666 EndSection

Section "Extensions" Option "Composite" "0" EndSection

Monitor zvlada 720 x 400 @ 70 Hz 640 x 480 @ 60/75 Hz 800 x 600 @ 60/75 Hz 1024 x 768 @ 60/70/75 Hz 1280 x 1024 @ 60/75 Hz

Potom som vygeneroval s gtf 1024 768 70 a dal som to: Section "Monitor" Identifier "B71A" Option "DPMS" EndSection

Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection

na koniec obidvoch sekcii...NO ale stale nic...No neviem

Odpovědi

[stativ]

Doporučil bych dát to do pre tagu. Xorg.0.log by se možná taky hodil

[#Tom]

Ten maglajs se mi číst nechce. Jediné, co mně napadá bez luštění výše uvedeného, je vyřadit všechno, co má něco společného s obnovovacími frekvencemi (tj. HorizSync, VertRefresh a ModeLine v části Monitor), protože pro DVI tyto věci nejsou potřeba.

[John DOE]

U ovladače grafiky přidej

Option		"ConnectedMonitor"		"DFP"

[marek@ubuntu]

Co to znamena ?DFP

[Martinus]

Digital Flat Panel (aspon myslim)

[marek@ubuntu]

Nasiel som neake stranky mozna pomozu: http://www.bohne-lang.de/spec/linux/modeline/modline.php?MODE=1&RE_VALUE=1280+1024&FREQ=60 http://www.abclinuxu.cz/forum/show/98932 http://www.abclinuxu.cz/forum/show/84516 http://www.abclinuxu.cz/forum/show/125449

A neake volby do xorg-u: Option "TwinView" "on" Option "TwinViewOrientation" "Clone" Option "UseDisplayDevice" "CRT-0, DFP-0"

Section "Device" Identifier "Videocard0" Driver "radeon" # Driver "vesa" VendorName "Videocard vendor" BoardName "ATI Radeon 9100" Option "BusType" "AGP" Option "AGPMode" "4" Option "MonitorLayout" "TMDS" Option "DisplayPriority" "BIOS" EndSection

1) Jaka je obnovovaci frekvence? Pokud je tam vice nez nejakych 70/75 Hz, tak to LCD nezvladne, to je normalni. A prepokladam ze tam takova frekvence kvuli CRT byla. Takze: zmenit parametry monitoru.

2) Nejak mi unikla informace o driveru, takze:

man nv

neboman nvidia u driveru od vyrobce precist README, je tam toho opravdu hodne!

3) Minimalne bych zapnul ze se jedna o LCD (Option "FlatPanel" "true" nebo podobne).

4) Tyto kartu mam a funguje naprosto bez problemu. Chyba bude opravdu v nastaveni.

Option "ignoredisplaydevices" "TV, CRT" Option "ConnectedMonitor" "DFP

Na nvidia karte mi pomohol parameter Option "ConnectedMonitor" "DFP" v sekcii Device. Na vyber bola hodnota CRT a DFP (Digital Flat Panel). Pozri sa do dokumentacie x.org ci je podobny parameter pre driver radeon. /var/log/Xorg.0.log - prezradi co sa deje pri starte X servera. V sekci "Monitor" nechte jen Identifier a ModelName. Monitor/LCD si sám řekne, jaké módy umí zobrazit... Já to tak mám, a normálně to funguje Jestli máš ty samé ovladače co já, mělo by to jít přes příkaz fglrxconfig .Ale mam jeden monitor a tak nemám testovaný... U ovladače grafiky přidej

Option "ConnectedMonitor" "DFP"

[marek@ubuntu]

Stale mi to nejde...fakt neviem co mam spravit:( som zufaly..Skusil som vsetky distra slackware ubuntu suse FC..gentoo...A nic...ked nahodit fglrx ovladace nejde..Da sa aj s inymi ovladacmi spojazdnit 3D a beryl?