Portál AbcLinuxu, 12. května 2025 10:22
[root@michal-a8jc ipw3945-1.1.0]# make
WARNING: Your kernel contains ieee80211 symbol definitions and you
are not using the kernel's default ieee80211 subsystem. (Perhaps you
used the out-of-tree ieee80211 subsystem's 'make install' or have
provided a path to the ieee80211 subsystem via IEEE80211_INC.)
If you wish to use the out-of-tree ieee80211 subsystem then it is
recommended to use that projects' "make patch_kernel" facility
and rebuild your kernel to update the Module symbol version information.
Failure to do this may result in build warnings and unexpected
behavior when running modules which rely on the ieee80211 subsystem.
Aborting the build. You can force the build to continue by adding:
IEEE80211_IGNORE_DUPLICATE=y
to your make command line.
make: *** [check_inc] Error 1tak som dal prikaz make IEEE80211_IGNORE_DUPLICATE=y (to uz podla navodu malo prebehnut v poriadku) ale znova vypisalo chybu:
[root@michal-a8jc ipw3945-1.1.0]# make IEEE80211_IGNORE_DUPLICATE=y
WARNING: Your kernel contains ieee80211 symbol definitions and you
are not using the kernel's default ieee80211 subsystem. (Perhaps you
used the out-of-tree ieee80211 subsystem's 'make install' or have
provided a path to the ieee80211 subsystem via IEEE80211_INC.)
If you wish to use the out-of-tree ieee80211 subsystem then it is
recommended to use that projects' "make patch_kernel" facility
and rebuild your kernel to update the Module symbol version information.
Failure to do this may result in build warnings and unexpected
behavior when running modules which rely on the ieee80211 subsystem.
Using ieee80211 subsystem version '1.2.16' (API v2) from:
Base: /lib/modules/2.6.18-1.2798.fc6/
Path: /lib/modules/2.6.18-1.2798.fc6/include/
EXTRA_CFLAGS = -I/lib/modules/2.6.18-1.2798.fc6/include/ -DIEEE80211_API_VERSION=2 -g -Wa,-adhlms=check_inc.lst
make -C /lib/modules/2.6.18-1.2798.fc6/build M=/home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0 modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
CC [M] /home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0/ipw3945.o
In file included from /home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0/ipw3945.c:68:
/home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0/ipw3945.h:32:26: error: linux/config.h: No such file or directory
make[2]: *** [/home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0/ipw3945.o] Error 1
make[1]: *** [_module_/home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
make: *** [modules] Error 23. na zaklade tej chyby som nainstaloval vsetky zavislosti pre make menuconfig a pustil make menuconfig v /usr/src/2.6.18-1.2798.fc6-i686 a myslel som si ze potom to uz prebehne ok
4. znova v adresari s ovladacom som pustil prikaz make IEEE80211_IGNORE_DUPLICATE=y ale znovu ta ista chyba:
[root@michal-a8jc ipw3945-1.1.0]# make IEEE80211_IGNORE_DUPLICATE=y
WARNING: Your kernel contains ieee80211 symbol definitions and you
are not using the kernel's default ieee80211 subsystem. (Perhaps you
used the out-of-tree ieee80211 subsystem's 'make install' or have
provided a path to the ieee80211 subsystem via IEEE80211_INC.)
If you wish to use the out-of-tree ieee80211 subsystem then it is
recommended to use that projects' "make patch_kernel" facility
and rebuild your kernel to update the Module symbol version information.
Failure to do this may result in build warnings and unexpected
behavior when running modules which rely on the ieee80211 subsystem.
Using ieee80211 subsystem version '1.2.16' (API v2) from:
Base: /lib/modules/2.6.18-1.2798.fc6/
Path: /lib/modules/2.6.18-1.2798.fc6/include/
EXTRA_CFLAGS = -I/lib/modules/2.6.18-1.2798.fc6/include/ -DIEEE80211_API_VERSION=2 -g -Wa,-adhlms=check_inc.lst
make -C /lib/modules/2.6.18-1.2798.fc6/build M=/home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0 modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
CC [M] /home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0/ipw3945.o
In file included from /home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0/ipw3945.c:68:
/home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0/ipw3945.h:32:26: error: linux/config.h: No such file or directory
make[2]: *** [/home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0/ipw3945.o] Error 1
make[1]: *** [_module_/home/makaveli/ipw3945-linux-1.1.0/ipw3945-1.1.0] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.18-1.2798.fc6-i686'
make: *** [modules] Error 2
fakt neviem co mam robit, uz som si nainstaloval od sietovky, cez webkameru, citacku kariet, bluetooth atd vsetko okrem wifiny, ale s nou sa uz babrem pekne dlho ale bez vysledky, poradi mi niekto pls???
Nevím jakou máš distribuci, ale obecně , stáhni si jádro /kernel/ , v debianu /apt-get install kernel-package kernel-source-2.6.8(třeba)/ pokud budeš v debianu tak do /usr/src/ se ti stahnul balik ten pomoci tar /tar xzvf kernel****/ rozbal , udělej si link /ln -s kernel*** linux/ vejdi do linux , dej příkaz make menuconfig a najdi tu podporu iee80211 a vypni ji. Pak jadro zkompiluj. Ale jak pišu nevím co máš za distro.Zbytecny aby si shanel novy jadro kdyz uz mu to funguje... to je teda taky rada pro zacatecnika aby si ho neumel nastavit a nechodilo mu to uplne... v konzoli pod rootem:
cd /usr/src/linux make menuconfigv jadre mit cca tydle volby
Networking --->
[ ] Generic IEEE 802.11 Networking Stack
Device Drivers --->
Network Device support --->
Wireless LAN (non-hamradio) --->
[*] Wireless LAN drivers (non-hamradio) & Wireless Extensions
Cryptographic options --->
[*] Cryptographic API
<*> AES cipher algorithms
<*> ARC4 cipher algorithm
<*> Michael MIC keyed digest algorithm
pak
mount /boot #Pokud nemate pripojenou bootovaci partisnu make; make install; make modules_installa reboot
If you wish to use the out-of-tree ieee80211 subsystem then it is recommended to use that projects' "make patch_kernel" facility and rebuild your kernel to update the Module symbol version information.Takhle hláška si o to přímo řiká. Tedy při instalaci ieee80211 spustit nejdřív
make patch_kernel
-miky
Na to si netroufnu ani ja, a to se programovanim pro Linux zivim.
Stacilo by trochu guglit a hnedka prvni odkaz vede na stranku, kde by tazatel nalezl hotove RPM balicky primo pro Fedora Core 6. Staci si jen vybrat prislusnou architekturu (i386 nebo x86_64) a nainstalovat.
Nicmene balicky nejsou oficialne od RedHatu, takze ... 
A jeste poznamka: temer vsechny wi-fi karty od Intelu potrebuji krome kerneloveho modulu take firmware. Nevim, zda je pribalen ve vyse zminenem baliku, nebo jej budete muset nainstalovat extra. Podivejte se tedy take po baliku s firmwarem (ipw-firmware, nebo tak nejak se bude jmenovat). Guglit to za Vas ale uz nebudu
1. Updatol som kernel prikazom: "yum update kernel" 2. Stiahol som baliky: ipw3945, ipw3945-kmdl, ipw3945d, ipw3945-firmware, ipw3945-ucode, iee80211-kmdl 3. Nainstalovat postupne balikyL ipw3945d, iee80211-kmdl, ipw3945-ucode, ipw394-kmdl, ipw3945, ip23945-firmware 4. Malo by to vsetko prebehnut bez problemov, potom pustit prikaz: moprobe ipw3945 a prikaz ipw3945d 5. Prikazom iwconfig by ste uz mali uspesne vidiet vasu wifi
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.