Portál AbcLinuxu, 10. května 2025 05:30
VP_IDE: not 100% native mode: will probe irqs later
dalsi info:
hdparm -tT /dev/hda
/dev/hda:
Timing cached reads: 128 MB in 2.03 seconds = 63.16 MB/sec
Timing buffered disk reads: 14 MB in 3.48 seconds = 4.03 MB/sec
hdparm /dev/hda
/dev/hda:
multcount = 0 (off)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
geometry = 24321/255/63, sectors = 390721968, start = 0
hdparm -i /dev/hda
/dev/hda:
Model=WDC WD2000JB-00GVA0, FwRev=08.02D08, SerialNo=WD-WCALL1116514
Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
RawCHS=16383/16/63, TrkSize=57600, SectSize=600, ECCbytes=74
BuffType=DualPortCache, BuffSize=8192kB, MaxMultSect=16, MultSect=off
CurCHS=65535/1/63, CurSects=4128705, LBA=yes, LBAsects=268435455
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5 udma3 udma4 *udma5
AdvancedPM=no WriteCache=enabled
Drive conforms to: Unspecified: ATA/ATAPI-1 ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6
* signifies the current active mode
/dev/hda:
Timing buffer-cache reads: 236 MB in 2.02 seconds = 116.83 MB/sec
Timing buffered disk reads: 16 MB in 3.32 seconds = 4.82 MB/sec
hdparm /dev/hda
/dev/hda:
multcount = 16 (on)
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 0 (off)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 8 (on)
geometry = 620/64/63, sectors = 2502308, start = 0
hdparm -i /dev/hda
/dev/hda:
Model=Seagate Technology 1275MB - ST31276A, FwRev=1.37, SerialNo=FNA3VML
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% }
RawCHS=2482/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=unknown, BuffSize=0kB, MaxMultSect=16, MultSect=16
CurCHS=2482/16/63, CurSects=2502308, LBA=yes, LBAsects=2502308
IORDY=on/off, tPIO={min:383,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio3 pio4
DMA modes: mdma0 mdma1 *mdma2
AdvancedPM=no
* signifies the current active mode
dmesg | grep IDE
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8231 (rev 10) IDE UDMA100 controller on pci00:11.1
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
uname -a
Linux ABCLinux 2.4.22-xfs #1 SMP Fr Sep 19 17:55:45 CEST 2003 i686 GNU/Linux
Takže to jsou moje údaje, jaká rychlost má být pro mdma2 netuším a nepátral jsem po tom protože ten můj HDD je starý.
Ale asi začnu pátrat....
# # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_UID16=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # Loadable module support # CONFIG_MODULES=y CONFIG_KMOD=y # # Processor type and features # CONFIG_M386=y CONFIG_X86_L1_CACHE_SHIFT=4 CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_X86_PPRO_FENCE=y CONFIG_X86_MCE=y CONFIG_TOSHIBA=m CONFIG_I8K=m CONFIG_MICROCODE=m CONFIG_X86_MSR=m CONFIG_X86_CPUID=m CONFIG_HIGHMEM4G=y CONFIG_HIGHMEM=y CONFIG_MTRR=y CONFIG_SMP=y # # General setup # CONFIG_NET=y CONFIG_X86_IO_APIC=y CONFIG_X86_LOCAL_APIC=y CONFIG_PCI=y CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_ISA=y CONFIG_PCI_NAMES=y CONFIG_EISA=y CONFIG_MCA=y CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # CONFIG_PCMCIA=m CONFIG_CARDBUS=y CONFIG_TCIC=y CONFIG_I82092=y CONFIG_I82365=y # # PCI Hotplug Support # CONFIG_HOTPLUG_PCI=m CONFIG_HOTPLUG_PCI_COMPAQ=m CONFIG_HOTPLUG_PCI_IBM=m CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_SYSCTL=y CONFIG_KCORE_ELF=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m CONFIG_PM=y CONFIG_APM=m CONFIG_APM_DO_ENABLE=y CONFIG_APM_ALLOW_INTS=y # # ACPI Support # # CONFIG_ACPI is not set # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Plug and Play configuration # CONFIG_PNP=y CONFIG_ISAPNP=y # # Block devices # CONFIG_BLK_DEV_FD=y CONFIG_BLK_DEV_PS2=m CONFIG_BLK_DEV_XD=m CONFIG_PARIDE=m CONFIG_PARIDE_PARPORT=m # # Parallel IDE high-level drivers # CONFIG_PARIDE_PD=m CONFIG_PARIDE_PCD=m CONFIG_PARIDE_PF=m CONFIG_PARIDE_PT=m CONFIG_PARIDE_PG=m # # Parallel IDE protocol modules # CONFIG_PARIDE_ATEN=m CONFIG_PARIDE_BPCK=m CONFIG_PARIDE_BPCK6=m CONFIG_PARIDE_COMM=m CONFIG_PARIDE_DSTR=m CONFIG_PARIDE_FIT2=m CONFIG_PARIDE_FIT3=m CONFIG_PARIDE_EPAT=m CONFIG_PARIDE_EPATC8=y CONFIG_PARIDE_EPIA=m CONFIG_PARIDE_FRIQ=m CONFIG_PARIDE_FRPW=m CONFIG_PARIDE_KBIC=m CONFIG_PARIDE_KTTI=m CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_CPQ_DA=m CONFIG_BLK_CPQ_CISS_DA=m CONFIG_CISS_SCSI_TAPE=y CONFIG_BLK_DEV_DAC960=m CONFIG_BLK_DEV_UMEM=m CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_INITRD=y # CONFIG_BLK_STATS is not set # # Multi-device support (RAID and LVM) # CONFIG_MD=y CONFIG_BLK_DEV_MD=m CONFIG_MD_LINEAR=m CONFIG_MD_RAID0=m CONFIG_MD_RAID1=m CONFIG_MD_RAID5=m CONFIG_MD_MULTIPATH=m CONFIG_BLK_DEV_LVM=m # # ATA/IDE/MFM/RLL support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y CONFIG_IDEDISK_STROKE=y CONFIG_BLK_DEV_IDECS=m CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_IDEFLOPPY=m CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # CONFIG_BLK_DEV_CMD640=y # CONFIG_BLK_DEV_CMD640_ENHANCED is not set CONFIG_BLK_DEV_ISAPNP=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_GENERIC=y CONFIG_IDEPCI_SHARE_IRQ=y CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set # CONFIG_IDEDMA_PCI_AUTO is not set # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y CONFIG_IDEDMA_PCI_WIP=y CONFIG_BLK_DEV_ADMA100=y CONFIG_BLK_DEV_AEC62XX=y CONFIG_BLK_DEV_ALI15X3=y # CONFIG_WDC_ALI15X3 is not set CONFIG_BLK_DEV_AMD74XX=y # CONFIG_AMD74XX_OVERRIDE is not set CONFIG_BLK_DEV_CMD64X=y CONFIG_BLK_DEV_TRIFLEX=y CONFIG_BLK_DEV_CY82C693=y CONFIG_BLK_DEV_CS5530=y CONFIG_BLK_DEV_HPT34X=y # CONFIG_HPT34X_AUTODMA is not set CONFIG_BLK_DEV_HPT366=y CONFIG_BLK_DEV_PIIX=y CONFIG_BLK_DEV_NS87415=y CONFIG_BLK_DEV_OPTI621=y CONFIG_BLK_DEV_PDC202XX_OLD=y # CONFIG_PDC202XX_BURST is not set CONFIG_BLK_DEV_PDC202XX_NEW=y CONFIG_PDC202XX_FORCE=y CONFIG_BLK_DEV_RZ1000=y CONFIG_BLK_DEV_SC1200=y CONFIG_BLK_DEV_SVWKS=y CONFIG_BLK_DEV_SIIMAGE=y CONFIG_BLK_DEV_SIS5513=y CONFIG_BLK_DEV_SLC90E66=y CONFIG_BLK_DEV_TRM290=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_IDE_CHIPSETS is not set # CONFIG_IDEDMA_AUTO is not set CONFIG_IDEDMA_IVB=y # CONFIG_DMA_NONPCI is not set CONFIG_BLK_DEV_PDC202XX=y CONFIG_BLK_DEV_IDE_MODES=y CONFIG_BLK_DEV_ATARAID=y CONFIG_BLK_DEV_ATARAID_PDC=y CONFIG_BLK_DEV_ATARAID_HPT=y CONFIG_BLK_DEV_ATARAID_SII=y # # SCSI support # CONFIG_SCSI=y # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y CONFIG_SD_EXTRA_DEVS=40 CONFIG_CHR_DEV_ST=m CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_SR_EXTRA_DEVS=2 CONFIG_CHR_DEV_SG=m # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # # CONFIG_SCSI_DEBUG_QUEUES is not set # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # # SCSI low-level drivers # CONFIG_BLK_DEV_3W_XXXX_RAID=m CONFIG_SCSI_7000FASST=m CONFIG_SCSI_ACARD=m CONFIG_SCSI_AHA152X=m CONFIG_SCSI_AHA1542=m CONFIG_SCSI_AHA1740=m CONFIG_SCSI_AACRAID=m CONFIG_SCSI_AIC7XXX=m CONFIG_AIC7XXX_CMDS_PER_DEVICE=253 CONFIG_AIC7XXX_RESET_DELAY_MS=15000 CONFIG_AIC7XXX_PROBE_EISA_VL=y # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC79XX=m CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=15000 # CONFIG_AIC79XX_BUILD_FIRMWARE is not set CONFIG_AIC79XX_ENABLE_RD_STRM=y # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC7XXX_OLD=m # CONFIG_AIC7XXX_OLD_TCQ_ON_BY_DEFAULT is not set CONFIG_AIC7XXX_OLD_CMDS_PER_DEVICE=8 # CONFIG_AIC7XXX_OLD_PROC_STATS is not set CONFIG_SCSI_DPT_I2O=m CONFIG_SCSI_ADVANSYS=m CONFIG_SCSI_IN2000=m CONFIG_SCSI_AM53C974=m CONFIG_SCSI_MEGARAID=m CONFIG_SCSI_BUSLOGIC=m # CONFIG_SCSI_OMIT_FLASHPOINT is not set CONFIG_SCSI_CPQFCTS=m CONFIG_SCSI_DMX3191D=m CONFIG_SCSI_DTC3280=m CONFIG_SCSI_EATA=m # CONFIG_SCSI_EATA_TAGGED_QUEUE is not set # CONFIG_SCSI_EATA_LINKED_COMMANDS is not set CONFIG_SCSI_EATA_MAX_TAGS=16 CONFIG_SCSI_EATA_DMA=m CONFIG_SCSI_EATA_PIO=m CONFIG_SCSI_FUTURE_DOMAIN=m CONFIG_SCSI_FD_MCS=m CONFIG_SCSI_GDTH=m CONFIG_SCSI_GENERIC_NCR5380=m CONFIG_SCSI_GENERIC_NCR53C400=y CONFIG_SCSI_G_NCR5380_PORT=y # CONFIG_SCSI_G_NCR5380_MEM is not set CONFIG_SCSI_IBMMCA=m CONFIG_IBMMCA_SCSI_ORDER_STANDARD=y # CONFIG_IBMMCA_SCSI_DEV_RESET is not set CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m CONFIG_SCSI_INIA100=m CONFIG_SCSI_PPA=m CONFIG_SCSI_IMM=m CONFIG_SCSI_IZIP_EPP16=y # CONFIG_SCSI_IZIP_SLOW_CTR is not set CONFIG_SCSI_NCR53C406A=m CONFIG_SCSI_NCR_D700=m CONFIG_53C700_IO_MAPPED=y CONFIG_SCSI_NCR53C7xx=m CONFIG_SCSI_NCR53C7xx_sync=y CONFIG_SCSI_NCR53C7xx_FAST=y CONFIG_SCSI_NCR53C7xx_DISCONNECT=y CONFIG_SCSI_SYM53C8XX_2=m CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=0 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 # CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set CONFIG_SCSI_NCR53C8XX=m CONFIG_SCSI_SYM53C8XX=m CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=4 CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32 CONFIG_SCSI_NCR53C8XX_SYNC=20 # CONFIG_SCSI_NCR53C8XX_PROFILE is not set # CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set CONFIG_SCSI_NCR53C8XX_PQS_PDS=y # CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set CONFIG_SCSI_MCA_53C9X=m CONFIG_SCSI_PAS16=m CONFIG_SCSI_PCI2000=m CONFIG_SCSI_PCI2220I=m CONFIG_SCSI_PSI240I=m CONFIG_SCSI_QLOGIC_FAS=m CONFIG_SCSI_QLOGIC_ISP=m CONFIG_SCSI_QLOGIC_FC=m CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_SEAGATE=m CONFIG_SCSI_SIM710=m CONFIG_SCSI_SYM53C416=m CONFIG_SCSI_DC390T=m # CONFIG_SCSI_DC390T_NOGENSUPP is not set CONFIG_SCSI_T128=m CONFIG_SCSI_U14_34F=m # CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set CONFIG_SCSI_U14_34F_MAX_TAGS=8 CONFIG_SCSI_ULTRASTOR=m CONFIG_SCSI_NSP32=m CONFIG_SCSI_DEBUG=m # # PCMCIA SCSI adapter support # CONFIG_SCSI_PCMCIA=y CONFIG_PCMCIA_AHA152X=m CONFIG_PCMCIA_FDOMAIN=m CONFIG_PCMCIA_NINJA_SCSI=m CONFIG_PCMCIA_QLOGIC=m # # Fusion MPT device support # CONFIG_FUSION=m # CONFIG_FUSION_BOOT is not set CONFIG_FUSION_MAX_SGE=40 CONFIG_FUSION_ISENSE=m CONFIG_FUSION_CTL=m CONFIG_FUSION_LAN=m CONFIG_NET_FC=y # # Old CD-ROM drivers (not SCSI, not IDE) # CONFIG_CD_NO_IDESCSI=y CONFIG_AZTCD=m CONFIG_GSCD=m CONFIG_SBPCD=m CONFIG_MCD=m CONFIG_MCD_IRQ=11 CONFIG_MCD_BASE=300 CONFIG_MCDX=m CONFIG_OPTCD=m CONFIG_CM206=m CONFIG_SJCD=m CONFIG_ISP16_CDI=m CONFIG_CDU31A=m CONFIG_CDU535=m # # Hardware configuration # CONFIG_FT_STD_FDC=y # CONFIG_FT_MACH2 is not set # CONFIG_FT_PROBE_FC10 is not set # CONFIG_FT_ALT_FDC is not set CONFIG_FT_FDC_THR=8 CONFIG_FT_FDC_MAX_RATE=2000 CONFIG_FT_ALPHA_CLOCK=0 CONFIG_AGP=m CONFIG_AGP_INTEL=y CONFIG_AGP_I810=y CONFIG_AGP_VIA=y CONFIG_AGP_AMD=y CONFIG_AGP_AMD_8151=y CONFIG_AGP_SIS=y CONFIG_AGP_ALI=y CONFIG_AGP_SWORKS=y CONFIG_AGP_NVIDIA=y CONFIG_DRM=y # CONFIG_DRM_OLD is not set # # DRM 4.1 drivers # CONFIG_DRM_NEW=y CONFIG_DRM=y CONFIG_DRM_TDFX=m CONFIG_DRM_GAMMA=m CONFIG_DRM_R128=m CONFIG_DRM_RADEON=m CONFIG_DRM_I810=m CONFIG_DRM_I830=m CONFIG_DRM_MGA=m # # PCMCIA character devices # CONFIG_PCMCIA_SERIAL_CS=m CONFIG_SYNCLINK_CS=m CONFIG_MWAVE=m # # Multimedia devices # CONFIG_VIDEO_DEV=m # # Video For Linux # CONFIG_VIDEO_PROC_FS=y CONFIG_I2C_PARPORT=m # # Video Adapters # CONFIG_VIDEO_BT848=m CONFIG_VIDEO_PMS=m CONFIG_VIDEO_BWQCAM=m CONFIG_VIDEO_CQCAM=m CONFIG_VIDEO_W9966=m CONFIG_VIDEO_CPIA=m CONFIG_VIDEO_CPIA_PP=m CONFIG_VIDEO_CPIA_USB=m CONFIG_VIDEO_SAA5249=m CONFIG_TUNER_3036=m CONFIG_VIDEO_STRADIS=m CONFIG_VIDEO_ZORAN=m CONFIG_VIDEO_ZORAN_BUZ=m CONFIG_VIDEO_ZORAN_DC10=m CONFIG_VIDEO_ZORAN_LML33=m CONFIG_VIDEO_ZR36120=m CONFIG_VIDEO_MEYE=m # # File systems # CONFIG_QUOTA=y CONFIG_QFMT_V2=m CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set CONFIG_ADFS_FS=m CONFIG_ADFS_FS_RW=y CONFIG_AFFS_FS=m CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m CONFIG_EXT3_FS=m CONFIG_JBD=m CONFIG_JBD_DEBUG=y CONFIG_FAT_FS=y CONFIG_MSDOS_FS=m CONFIG_UMSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_EFS_FS=m # CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=m CONFIG_TMPFS=y CONFIG_RAMFS=y CONFIG_ISO9660_FS=y CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_JFS_FS=m # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_MINIX_FS=m CONFIG_VXFS_FS=m CONFIG_NTFS_FS=m CONFIG_NTFS_RW=y CONFIG_HPFS_FS=m CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_MOUNT is not set # CONFIG_DEVFS_DEBUG is not set CONFIG_DEVPTS_FS=y CONFIG_QNX4FS_FS=m CONFIG_QNX4FS_RW=y CONFIG_ROMFS_FS=m CONFIG_EXT2_FS=y CONFIG_SYSV_FS=m CONFIG_UDF_FS=m CONFIG_UDF_RW=y CONFIG_UFS_FS=m CONFIG_UFS_FS_WRITE=y CONFIG_XFS_FS=m CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y CONFIG_XFS_QUOTA=y CONFIG_XFS_DMAPI=y # CONFIG_XFS_DEBUG is not set # CONFIG_PAGEBUF_DEBUG is not set # # Network File Systems # CONFIG_CODA_FS=m CONFIG_INTERMEZZO_FS=m CONFIG_NFS_FS=m CONFIG_NFS_V3=y CONFIG_NFS_DIRECTIO=y # CONFIG_ROOT_NFS is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y CONFIG_NFSD_TCP=y CONFIG_SUNRPC=m CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_SMB_FS=m # CONFIG_SMB_NLS_DEFAULT is not set CONFIG_NCP_FS=m CONFIG_NCPFS_PACKET_SIGNING=y CONFIG_NCPFS_IOCTL_LOCKING=y CONFIG_NCPFS_STRONG=y CONFIG_NCPFS_NFS_NS=y CONFIG_NCPFS_OS2_NS=y CONFIG_NCPFS_SMALLDOS=y CONFIG_NCPFS_NLS=y CONFIG_NCPFS_EXTRAS=y CONFIG_ZISOFS_FS=y # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set CONFIG_OSF_PARTITION=y CONFIG_AMIGA_PARTITION=y CONFIG_ATARI_PARTITION=y CONFIG_MAC_PARTITION=y CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y CONFIG_UNIXWARE_DISKLABEL=y CONFIG_LDM_PARTITION=y # CONFIG_LDM_DEBUG is not set CONFIG_SGI_PARTITION=y CONFIG_ULTRIX_PARTITION=y CONFIG_SUN_PARTITION=y # CONFIG_EFI_PARTITION is not set CONFIG_SMB_NLS=y CONFIG_NLS=y
/dev/hda: Timing buffer-cache reads: 240 MB in 2.02 seconds = 118.95 MB/sec Timing buffered disk reads: 16 MB in 3.40 seconds = 4.71 MB/sec uname -a Linux Knoppix 2.6.6 #2 SMP Fri May 14 20:38:30 CEST 2004 i686 GNU/LinuxJinak v biosu máte u HDD u PIO a DMA nastavené AUTO, na jakém MHz vám to šlape?
cat /proc/cpuinfo processor : 0 vendor_id : CentaurHauls cpu family : 6 model : 7 model name : VIA Samuel 2 stepping : 3 cpu MHz : 533.568 cache size : 64 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu de tsc msr cx8 mtrr pge mmx 3dnow bogomips : 1052.67 Ram mám 133MHz
----------VIA BusMastering IDE Configuration---------------- Driver Version: 3.38 South Bridge: VIA vt8231 Revision: ISA 0x10 IDE 0x6 Highest DMA rate: UDMA100 BM-DMA base: 0xd000 PCI clock: 33.3MHz Master Read Cycle IRDY: 0ws Master Write Cycle IRDY: 0ws BM IDE Status Register Read Retry: yes Max DRDY Pulse Width: No limit -----------------------Primary IDE-------Secondary IDE------ Read DMA FIFO flush: yes yes End Sector FIFO flush: no no Prefetch Buffer: yes yes Post Write Buffer: yes yes Enabled: yes no Simplex only: no no Cable Type: 80w 40w -------------------drive0----drive1----drive2----drive3----- Transfer Mode: DMA UDMA PIO PIO Address Setup: 30ns 30ns 120ns 120ns Cmd Active: 90ns 90ns 480ns 480ns Cmd Recovery: 30ns 30ns 480ns 480ns Data Active: 90ns 90ns 330ns 330ns Data Recovery: 30ns 30ns 270ns 270ns Cycle Time: 120ns 30ns 600ns 600ns Transfer Rate: 16.6MB/s 66.6MB/s 3.3MB/s 3.3MB/s
/dev/sdb: Timing cached reads: 1092 MB in 2.00 seconds = 545.37 MB/sec Timing buffered disk reads: 158 MB in 3.01 seconds = 52.56 MB/secCenou je vyhodnejsi nez u EPIA, ale nema tolik moznosti volby konfigurace.
je to ST3160815A.
Takže pokud dáte rychlejší disk tak se to zvedne, ale nikdy to neukáže co má.
Jinak jak u něj vypnu dma tak to spadne na 3MB/s.
14.1.2008 11:55
ZmaTkar | skóre: 18
| blog: ZmaTkar
VP_IDE: not 100% native mode: will probe irqs later
Timhle to nebude, to mi píše kernel taky a IDE disky jedou normálně. Nenapadá mě ale kde by mohla bejt chyba.
při vypnutí dma 3MB/s přitom při pio4 by měl dát více ne.
A že by to dělalo stejně u dvou uživatelů a s rozdílnýmy HDD ? Prostě bude tam nějaká zrada....
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.