Portál AbcLinuxu, 10. května 2025 13:44

Dotaz: Arch, catalyst a *ERROR* CMMQS initialization is failed

unknown_ avatar 21.2.2008 12:03 unknown_ | skóre: 30 | blog: blog
Arch, catalyst a *ERROR* CMMQS initialization is failed
Přečteno: 800×
Odpovědět | Admin
Ahoj. Zkusil sem nainstalit Arch. Rychlost je vynikající (ta i686 optimalizace je znát). Mám problém. Nainstaloval sem pacman -S extra/catalyst (8.02-1). Pak sem do /etc/rc.conf dal modul fglrx. lsmod říká, že je naloadován.

dmesg:
Linux version 2.6.24-ARCH (root@T-POWA-LX) (gcc version 4.2.3) #1 SMP PREEMPT Sun Feb 10 15:21:33 UTC 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
 BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000d8000 - 00000000000e0000 (reserved)
 BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000001ff70000 (usable)
 BIOS-e820: 000000001ff70000 - 000000001ff7b000 (ACPI data)
 BIOS-e820: 000000001ff7b000 - 000000001ff80000 (ACPI NVS)
 BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
 BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
 BIOS-e820: 00000000fffff000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
511MB LOWMEM available.
Entering add_active_range(0, 0, 130928) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->   130928
  HighMem    130928 ->   130928
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->   130928
On node 0 totalpages: 130928
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 990 pages used for memmap
  Normal zone: 125842 pages, LIFO batch:31
  HighMem zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F66B0, 0014 (r0 PTLTD )
ACPI: RSDT 1FF762D7, 0030 (r1 PTLTD  Wistron   6040000  LTP        0)
ACPI: FACP 1FF7AED2, 0074 (r1 INTEL  ODEM      6040000 PTL        50)
ACPI: DSDT 1FF767DF, 46F3 (r1 INTEL  ODEM      6040000 MSFT  100000E)
ACPI: FACS 1FF7BFC0, 0040
ACPI: BOOT 1FF7AFD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
ACPI: SSDT 1FF76307, 04D0 (r1 INTEL    GV3Ref     1001 MSFT  100000E)
ACPI: PM-Timer IO Port: 0x1008
Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000d8000
swsusp: Registered nosave memory region: 00000000000d8000 - 00000000000e0000
swsusp: Registered nosave memory region: 00000000000e0000 - 00000000000e4000
swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129906
Kernel command line: root=/dev/sda3 ro
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffb000 (0140d000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 8192 bytes)
Detected 1694.519 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 512752k/523712k available (2493k kernel code, 10356k reserved, 853k data, 308k init, 0k highmem)
virtual kernel memory layout:
    fixmap  : 0xfff80000 - 0xfffff000   ( 508 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
    lowmem  : 0xc0000000 - 0xdff70000   ( 511 MB)
      .init : 0xc044b000 - 0xc0498000   ( 308 kB)
      .data : 0xc036f73f - 0xc0444cdc   ( 853 kB)
      .text : 0xc0100000 - 0xc036f73f   (2493 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Calibrating delay using timer specific routine.. 3392.92 BogoMIPS (lpj=5651072)
Security Framework initialized
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 11k freed
Early unpacking initramfs... done
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c00)
CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
net_namespace: 64 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd7d5, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using PIC for interrupt routing
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in interrupt mode
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10) *11
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
system 00:04: ioport range 0x200-0x20f has been reserved
system 00:04: ioport range 0x600-0x60f has been reserved
system 00:04: ioport range 0x700-0x70f has been reserved
system 00:04: ioport range 0x800-0x80f has been reserved
system 00:04: ioport range 0x1000-0x107f has been reserved
system 00:04: ioport range 0x1180-0x11bf has been reserved
system 00:04: iomem range 0xfec10000-0xfec1ffff has been reserved
PCI: Bridge: 0000:00:01.0
  IO window: 3000-3fff
  MEM window: d0100000-d01fffff
  PREFETCH window: d8000000-dfffffff
PCI: Bus 3, cardbus bridge: 0000:02:09.0
  IO window: 00001400-000014ff
  IO window: 00002800-000028ff
  PREFETCH window: 34000000-37ffffff
  MEM window: 38000000-3bffffff
PCI: Bus 7, cardbus bridge: 0000:02:09.1
  IO window: 00002c00-00002cff
  IO window: 00004000-000040ff
  PREFETCH window: 3c000000-3fffffff
  MEM window: 40000000-43ffffff
PCI: Bridge: 0000:00:1e.0
  IO window: disabled.
  MEM window: d0200000-d02fffff
  PREFETCH window: disabled.
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:02:09.0 (0000 -> 0003)
ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:02:09.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 1695k freed
Simple Boot Flag at 0x36 set to 0x1
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt for device 0000:00:1f.6 disabled
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Using IPI No-Shortcut mode
Freeing unused kernel memory: 308k freed
libata version 3.00 loaded.
ata_piix 0000:00:1f.1: version 2.12
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.1 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
ata1.00: ATA-6: HTE726060M9AT00, MH4OA6AA, max UDMA/100
ata1.00: 117210240 sectors, multi 16: LBA48 
ata1.00: configured for UDMA/100
ata2.00: ATAPI: QSI     DVD+/-RW SDW-082, LX32, max UDMA/33
ata2.00: configured for UDMA/33
scsi 0:0:0:0: Direct-Access     ATA      HTE726060M9AT00  MH4O PQ: 0 ANSI: 5
scsi 1:0:0:0: CD-ROM            QSI      DVD+-RW SDW-082  LX32 PQ: 0 ANSI: 5
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
usb usb1: configuration #1 chosen from 1 choice
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 117210240 512-byte hardware sectors (60012 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda:<6>hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
 sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 12x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 10, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 10, io mem 0xd0000000
usb 1-1: new low speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usb 1-1: new low speed USB device using uhci_hcd and address 3
usb 1-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:02:05.0[A] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:05.0 to 64
ssb: Sonics Silicon Backplane found on PCI device 0000:02:05.0
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:0a:e4:b6:20:82
ieee80211_crypt: registered algorithm 'NULL'
ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kmprq
ipw2200: Copyright(c) 2003-2006 Intel Corporation
PCI: Enabling device 0000:02:06.0 (0000 -> 0002)
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
ipw2200: Detected geography ZZE (13 802.11bg channels, 19 802.11a channels)
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 52799 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:00:1f.6 to 64
Linux agpgart interface v0.102
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 430 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.45.5 [Feb  1 2008] on minor 0
ACPI: AC Adapter [ADP1] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/virtual/input/input2
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/virtual/input/input3
ACPI: Lid Switch [LID0]
input: Sleep Button (CM) as /devices/virtual/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [THRC] (73 C)
ACPI: Thermal Zone [THRS] (59 C)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 1:0:0:0: Attached scsi generic sg1 type 5
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
agpgart: Detected an Intel 855PM Chipset.
agpgart: AGP aperture is 256M @ 0xe0000000
usbcore: registered new interface driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1:1.0/input/input5
input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/LNXVIDEO:00/input/input6
ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
input: PC Speaker as /devices/platform/pcspkr/input/input7
Yenta: CardBus bridge found at 0000:02:09.0 [17c0:3301]
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k
Yenta: ISA IRQ mask 0x00b8, PCI irq 11
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #02 to #06
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
Yenta: CardBus bridge found at 0000:02:09.1 [17c0:3301]
Yenta: ISA IRQ mask 0x00b8, PCI irq 10
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#02) from #06 to #0a
pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
ACPI: PCI Interrupt 0000:02:09.2[C] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
PCI: Setting latency timer of device 0000:02:09.2 to 64
Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9248b1, caps: 0x904713/0x4000
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[10]  MMIO=[d0203000-d02037ff]  Max Packet=[2048]  IR/IT contexts=[4/4]
parport_pc 00:06: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE]
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[06e40a00694f1003]
lp0: using parport0 (interrupt-driven).
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
cs: IO port probe 0x100-0x3af: clean.
cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0x820-0x8ff: clean.
cs: IO port probe 0xc00-0xcf7: clean.
cs: IO port probe 0xa00-0xaff: clean.
ppdev: user-space parallel port driver
Marking TSC unstable due to: TSC halts in idle.
Time: acpi_pm clocksource has been installed.
EXT3 FS on sda3, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 1028152k swap on /dev/sda2.  Priority:-1 extents:1 across:1028152k
b44: eth0: Link is up at 10 Mbps, half duplex.
b44: eth0: Flow control is off for TX and off for RX.
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
[fglrx] Reserve Block - 0 offset =  0X0 length = 0X40000
[fglrx] Reserve Block - 1 offset =  0X7ff5000 length = 0Xb000
[fglrx] Reserve Block - 2 offset =  0X8000000 length = 0X10000000
[fglrx:firegl_cmmqs_init] *ERROR* CMMQS initialization is failed.
NET: Registered protocol family 4
NET: Registered protocol family 5
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
eth0: no IPv6 routers present
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
[fglrx:firegl_cmmqs_init] *ERROR* CMMQS initialization is failed.

lsmod:
Module                  Size  Used by
ipv6                  248388  8 
appletalk              30688  2 
ipx                    23972  2 
p8022                   2048  1 ipx
psnap                   3332  2 appletalk,ipx
llc                     6036  2 p8022,psnap
p8023                   1920  1 ipx
ext2                   62472  1 
joydev                  9664  0 
ppdev                   7556  0 
lp                      9220  0 
parport_pc             35172  1 
parport                31432  3 ppdev,lp,parport_pc
firewire_ohci          16128  0 
firewire_core          36544  1 firewire_ohci
crc_itu_t               2304  1 firewire_core
serio_raw               5636  0 
psmouse                36496  0 
rtc_cmos                7584  0 
rtc_core               15496  1 rtc_cmos
rtc_lib                 2944  1 rtc_core
ohci1394               28848  0 
ieee1394               79800  1 ohci1394
yenta_socket           23052  2 
rsrc_nonstatic         11008  1 yenta_socket
pcspkr                  2944  0 
video                  16016  0 
output                  3200  1 video
i2c_i801                8848  0 
i2c_core               19328  1 i2c_i801
usbhid                 40896  0 
hid                    33920  1 usbhid
ff_memless              5128  1 usbhid
intel_agp              21780  1 
shpchp                 29460  0 
pci_hotplug            26528  1 shpchp
sg                     26640  0 
evdev                   9344  0 
thermal                13084  0 
processor              29400  2 thermal
fan                     3844  0 
button                  6544  0 
battery                10756  0 
ac                      4612  0 
fglrx                1475852  3 
agpgart                27352  2 intel_agp,fglrx
snd_intel8x0m          14092  0 
snd_seq_oss            29440  0 
snd_seq_midi_event      6528  1 snd_seq_oss
snd_seq                47056  4 snd_seq_oss,snd_seq_midi_event
snd_seq_device          6924  2 snd_seq_oss,snd_seq
snd_intel8x0           28572  0 
snd_ac97_codec         95268  2 snd_intel8x0m,snd_intel8x0
snd_pcm_oss            37024  0 
snd_pcm                68996  4 snd_intel8x0m,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
snd_timer              19204  2 snd_seq,snd_pcm
snd_page_alloc          8072  3 snd_intel8x0m,snd_intel8x0,snd_pcm
snd_mixer_oss          14464  1 snd_pcm_oss
snd                    44772  10 snd_intel8x0m,snd_seq_oss,snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore               6368  1 snd
ac97_bus                2176  1 snd_ac97_codec
ipw2200               138184  0 
ieee80211              30664  1 ipw2200
ieee80211_crypt         4992  1 ieee80211
b44                    23568  0 
ssb                    29188  1 b44
pcmcia                 32556  1 ssb
pcmcia_core            32664  3 yenta_socket,rsrc_nonstatic,pcmcia
mii                     4864  1 b44
ext3                  121992  2 
jbd                    43412  1 ext3
mbcache                 6912  2 ext2,ext3
sr_mod                 14884  0 
cdrom                  33824  1 sr_mod
sd_mod                 22656  5 
ehci_hcd               32524  0 
uhci_hcd               22672  0 
pata_acpi               5248  0 
usbcore               125292  4 usbhid,ehci_hcd,uhci_hcd
ata_piix               14724  4 
ata_generic             5252  0 
libata                137712  3 pata_acpi,ata_piix,ata_generic
xorg.conf:
Section "ServerLayout"
	Identifier     "X.org Configured"
	Screen      0  "aticonfig-Screen[0]" 0 0
	InputDevice    "Mouse0" "CorePointer"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
	RgbPath      "/usr/share/X11/rgb"
	ModulePath   "/usr/lib/xorg/modules"
	FontPath     "/usr/share/fonts/misc"
	FontPath     "/usr/share/fonts/100dpi:unscaled"
	FontPath     "/usr/share/fonts/75dpi:unscaled"
	FontPath     "/usr/share/fonts/TTF"
	FontPath     "/usr/share/fonts/Type1"
EndSection

Section "Module"
	Load  "xtrap"
	Load  "glx"
	Load  "extmod"
	Load  "dbe"
	Load  "record"
	Load  "GLcore"
#	Load  "dri"
	Load  "freetype"
EndSection

Section "InputDevice"
	Identifier  "Keyboard0"
	Driver      "kbd"
EndSection

Section "InputDevice"
	Identifier  "Mouse0"
	Driver      "mouse"
	Option	    "Protocol" "auto"
	Option	    "Device" "/dev/input/mice"
	Option	    "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
	Identifier   "Monitor0"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
EndSection

Section "Device"

     
	Identifier  "Card0"
	Driver      "ati"
	VendorName  "ATI Technologies Inc"
	BoardName   "RV350 [Mobility Radeon 9600 M10]"
	BusID       "PCI:1:0:0"
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]"
	Driver      "fglrx"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Card0"
	Monitor    "Monitor0"
	SubSection "Display"
		Viewport   0 0
		Depth     1
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     4
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     8
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     15
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     16
	EndSubSection
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]"
	Device     "aticonfig-Device[0]"
	Monitor    "aticonfig-Monitor[0]"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
	EndSubSection
EndSection

#Section "DRI"
#	Mode 0666
#EndSection
             
problém je, že to hlásí:
[merlyn@Vallhala ~]$ glxinfo|grep render
direct rendering: No (If you want to find out why, try setting LIBGL_DEBUG=verbose)
OpenGL renderer string: Mesa GLX Indirect
[merlyn@Vallhala ~]$
// po zadání export LIBGL_DEBUG=verbose se nic nezmění

a
[merlyn@Vallhala ~]$ fglrxinfo
display: :0.0  screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.4 (2.1 Mesa 7.0.3-rc1)

[merlyn@Vallhala ~]$
A 3D akcelerace nefunguje a netuším co s tím. M
Nástroje: Začni sledovat (0) ?Zašle upozornění na váš email při vložení nového komentáře.

Odpovědi

kozzi avatar 21.2.2008 12:22 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
Odpovědět | | Sbalit | Link | Blokovat | Admin
A co /var/log/Xorg.0.log
Linux je jako mušketýři "jeden za všechny, všichni za jednoho"
unknown_ avatar 21.2.2008 12:25 unknown_ | skóre: 30 | blog: blog
Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed

This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.

X.Org X Server 1.4.0.90
Release Date: 5 September 2007
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-ARCH i686 
Current Operating System: Linux Vallhala 2.6.24-ARCH #1 SMP PREEMPT Sun Feb 10 15:21:33 UTC 2008 i686
Build Date: 03 February 2008  02:54:48PM
 
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 21 20:30:19 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) |   |-->Monitor "aticonfig-Monitor[0]"
(**) |   |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1,
	/usr/share/fonts/misc,
	/usr/share/fonts/100dpi:unscaled,
	/usr/share/fonts/75dpi:unscaled,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d65c0
(II) Module ABI versions:
	X.Org ANSI C Emulation: 0.3
	X.Org Video Driver: 2.0
	X.Org XInput driver : 2.0
	X.Org Server Extension : 0.3
	X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(--) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 17c0,4010 rev 21 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 21 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 17c0,4006 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 17c0,4006 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 17c0,4006 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 17c0,1071 rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 17c0,4006 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 17c0,4006 rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 17c0,2005 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 17c0,1069 rev 03 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e50 card 17c0,2072 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:05:0: chip 14e4,4401 card 17c0,1082 rev 01 class 02,00,00 hdr 00
(II) PCI: 02:06:0: chip 8086,4223 card 8086,1001 rev 05 class 02,80,00 hdr 00
(II) PCI: 02:09:0: chip 1180,0476 card 1400,0000 rev ac class 06,07,00 hdr 82
(II) PCI: 02:09:1: chip 1180,0476 card 2c00,0000 rev ac class 06,07,00 hdr 82
(II) PCI: 02:09:2: chip 1180,0552 card 17c0,107a rev 04 class 0c,00,10 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 I/O range:
	[0] -1	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[1] -1	0	0x00003400 - 0x000034ff (0x100) IX[B]
	[2] -1	0	0x00003800 - 0x000038ff (0x100) IX[B]
	[3] -1	0	0x00003c00 - 0x00003cff (0x100) IX[B]
(II) Bus 1 non-prefetchable memory range:
	[0] -1	0	0xd0100000 - 0xd01fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
	[0] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,10), BCTRL: 0x0000 (VGA_EN is cleared)
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xd0200000 - 0xd02fffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:9:0), (2,3,6), BCTRL: 0x0580 (VGA_EN is cleared)
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:9:1), (2,7,10), BCTRL: 0x0580 (VGA_EN is cleared)
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xd8000000/27, 0xd0100000/16, I/O @ 0x3000/8
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
	[1] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
	[2] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
	[3] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[4] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[5] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
	[6] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[8] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[10] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[11] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[12] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[13] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[14] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[15] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[16] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[17] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[18] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[19] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[20] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[21] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[22] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[23] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
	[1] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
	[2] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
	[3] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[4] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[5] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
	[6] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[7] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[8] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[9] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[10] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[11] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[12] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[13] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[14] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[15] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[16] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[17] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[18] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[19] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[20] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[21] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[22] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[23] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[5] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
	[5] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
	[6] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
	[7] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[8] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[9] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
	[10] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[12] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[13] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[16] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[17] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[18] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[19] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[20] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[21] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[23] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[26] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[27] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[28] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[29] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DEC-XTRAP
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.13.0
	Module class: X.Org Server Extension
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
	compiled for 1.4.0.90, module version = 2.1.0
	Module class: X.Org Font Renderer
	ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.45.5
	Module class: X.Org Video Driver
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.3
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
	compiled for 1.4.0, module version = 1.2.2
	Module class: X.Org XInput Driver
	ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 01:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.45.5
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.455.2                  
(II) ATI Proprietary Linux Driver Build Date: Feb  1 2008 10:11:22
(--) Assigning device section with no busID to primary device
(--) Chipset Supported AMD Graphics Processor (0x4E50) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
	[5] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
	[6] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
	[7] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[8] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[9] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
	[10] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[12] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[13] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[14] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[15] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[16] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[17] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[18] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[19] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[20] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[21] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[22] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[23] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[24] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[26] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[27] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[28] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[29] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x820bb20
(II) resource ranges after probing:
	[0] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[4] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
	[5] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
	[6] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
	[7] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[8] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[9] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
	[10] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[11] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[12] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[13] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[14] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[15] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[16] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[17] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[18] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[19] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[20] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[21] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[22] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[23] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[24] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[25] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[26] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[27] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[29] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[30] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[31] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[32] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
	[33] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[34] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 0.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 1 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(**) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "ATI MOBILITY RADEON 9600/9700 Series" (Chipset = 0x4e50)
(--) fglrx(0): (PciSubVendor = 0x17c0, PciSubDevice = 0x2072)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd8000000
(--) fglrx(0): MMIO registers at 0xd0100000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.1.0
	ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 2.0
(II) fglrx(0): VESA VBE Total Mem: 131072 kB
(II) fglrx(0): VESA VBE OEM: ATI MOBILITY RADEON 9600   
(II) fglrx(0): VESA VBE OEM Software Rev: 1.0
(II) fglrx(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: P10 
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 7.1.0, module version = 8.45.5
	ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 1:0.0.
(--) fglrx(0): VideoRAM: 131072 kByte, Type: DDR SGRAM / SDRAM
(II) fglrx(0): AGP card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: LCD on internal LVDS [lvds]
(II) fglrx(0):  Display1: No EDID information from DDC.
(II) fglrx(0):  Display1: Failed to get EDID information. 
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - LCD on internal LVDS
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay version 3.  1 power state available:
(II) fglrx(0):   1. 392/203MHz @ 60Hz [enable load balancing]
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0):  PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(**) fglrx(0): Center Mode is disabled 
(==) fglrx(0): TMDS coherent mode is enabled 
(II) fglrx(0): Total of 15 modes found for primary display.
(--) fglrx(0): Virtual size is 1400x1050 (pitch 0)
(**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0  108.00  1400 1440 1552 1688  1050 1052 1055 1063 (64.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1376 1488 1688  1024 1038 1041 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0  108.00  1152 1312 1424 1688  864 961 964 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  108.00  1024 1248 1360 1688  768 910 913 1066 (64.0 kHz)
(**) fglrx(0): *Mode "848x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0  108.00  848 1160 1272 1688  480 766 769 1066 (64.0 kHz)
(**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  108.00  800 1136 1248 1688  600 826 829 1066 (64.0 kHz)
(**) fglrx(0): *Mode "720x576": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0  108.00  720 1096 1208 1688  576 814 817 1066 (64.0 kHz)
(**) fglrx(0): *Mode "720x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0  108.00  720 1096 1208 1688  480 766 769 1066 (64.0 kHz)
(**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  108.00  640 1056 1168 1688  480 766 769 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  108.00  640 1056 1168 1688  400 726 729 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"x60.0  108.00  640 1056 1168 1688  350 701 704 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "512x384": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  108.00  512 992 1104 1688  384 718 721 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "400x300": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0  108.00  400 936 1048 1688  300 826 829 1066 doublescan (64.0 kHz)
(**) fglrx(0):  Default mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0  108.00  320 920 1032 1688  240 766 769 1066 doublescan (64.0 kHz)
(**) fglrx(0):  Default mode "320x200": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0  108.00  320 920 1032 1688  200 726 729 1066 doublescan (64.0 kHz)
(==) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1400x1050 (pitch 1408)
(**) fglrx(0): *Mode "1400x1050": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1400x1050"x60.0  108.00  1400 1440 1552 1688  1050 1052 1055 1063 (64.0 kHz)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1376 1488 1688  1024 1038 1041 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0  108.00  1152 1312 1424 1688  864 961 964 1066 (64.0 kHz)
(**) fglrx(0): *Mode "1024x768": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0  108.00  1024 1248 1360 1688  768 910 913 1066 (64.0 kHz)
(**) fglrx(0): *Mode "848x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "848x480"x60.0  108.00  848 1160 1272 1688  480 766 769 1066 (64.0 kHz)
(**) fglrx(0): *Mode "800x600": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0  108.00  800 1136 1248 1688  600 826 829 1066 (64.0 kHz)
(**) fglrx(0): *Mode "720x576": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x576"x60.0  108.00  720 1096 1208 1688  576 814 817 1066 (64.0 kHz)
(**) fglrx(0): *Mode "720x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0  108.00  720 1096 1208 1688  480 766 769 1066 (64.0 kHz)
(**) fglrx(0): *Mode "640x480": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0  108.00  640 1056 1168 1688  480 766 769 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "640x400": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0  108.00  640 1056 1168 1688  400 726 729 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "640x350": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x350"x60.0  108.00  640 1056 1168 1688  350 701 704 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "512x384": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0  108.00  512 992 1104 1688  384 718 721 1066 (64.0 kHz)
(**) fglrx(0):  Default mode "400x300": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0  108.00  400 936 1048 1688  300 826 829 1066 doublescan (64.0 kHz)
(**) fglrx(0):  Default mode "320x240": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0  108.00  320 920 1032 1688  240 766 769 1066 doublescan (64.0 kHz)
(**) fglrx(0):  Default mode "320x200": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0  108.00  320 920 1032 1688  200 726 729 1066 doublescan (64.0 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.2.0
	ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) fglrx(0): Depth moves disabled by default
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x8000001d
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 256 MB
(II) fglrx(0): [pci] find AGP GART
(II) fglrx(0): [agp] Mode=0x1f000217 bridge: 0x8086/0x3340
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f000314
(II) fglrx(0): [agp] Remapping MC AGP space (new MCAGPBase = 0xe0000000)
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f000314)
(II) fglrx(0): [agp] graphics chipset has AGP v2.0
(II) fglrx(0): [pcie] 0 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xd0100000 - 0xd010ffff (0x10000) MX[B]
	[1] 0	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B]
	[2] -1	0	0x00100000 - 0x2fffffff (0x2ff00000) MX[B]E(B)
	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[6] -1	0	0xd0203000 - 0xd02037ff (0x800) MX[B]
	[7] -1	0	0xd0202000 - 0xd0202fff (0x1000) MX[B]
	[8] -1	0	0xd0200000 - 0xd0201fff (0x2000) MX[B]
	[9] -1	0	0xd0000800 - 0xd00008ff (0x100) MX[B]
	[10] -1	0	0xd0000c00 - 0xd0000dff (0x200) MX[B]
	[11] -1	0	0x30000000 - 0x300003ff (0x400) MX[B]
	[12] -1	0	0xd0000000 - 0xd00003ff (0x400) MX[B]
	[13] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[14] -1	0	0xd0100000 - 0xd010ffff (0x10000) MX[B](B)
	[15] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[16] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
	[17] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
	[18] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
	[19] 0	0	0x00003000 - 0x000030ff (0x100) IX[B]
	[20] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[21] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[22] -1	0	0x00002000 - 0x0000207f (0x80) IX[B]
	[23] -1	0	0x00002400 - 0x000024ff (0x100) IX[B]
	[24] -1	0	0x000018c0 - 0x000018ff (0x40) IX[B]
	[25] -1	0	0x00001c00 - 0x00001cff (0x100) IX[B]
	[26] -1	0	0x00001880 - 0x0000189f (0x20) IX[B]
	[27] -1	0	0x00001860 - 0x0000186f (0x10) IX[B]
	[28] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[29] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[30] -1	0	0x000001f0 - 0x000001f0 (0x1) IX[B]
	[31] -1	0	0x000001f0 - 0x000001f7 (0x8) IX[B]
	[32] -1	0	0x00001840 - 0x0000185f (0x20) IX[B]
	[33] -1	0	0x00001820 - 0x0000183f (0x20) IX[B]
	[34] -1	0	0x00001800 - 0x0000181f (0x20) IX[B]
	[35] -1	0	0x00003000 - 0x000030ff (0x100) IX[B](B)
	[36] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
	[37] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(WW) fglrx(0): could not detect X server version (query_status=-3)
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:1:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports 
drmOpenDevice: node name is /dev/dri/card1
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card2
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card3
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card4
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card5
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card6
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card7
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card8
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card9
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card10
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card11
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card12
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card13
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card14
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenByBusid: drmOpenMinor returns -19
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmGetBusid returned ''
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0x7000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [drm] installed DRM signal handler
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.45.5
(II) fglrx(0):     Date: Feb  1 2008
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.24-ARCH
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0x00009000
(II) fglrx(0): Interrupt handler installed at IRQ 11.
(II) fglrx(0): Exposed events to the /proc interface
(EE) fglrx(0): Failed to initialize CMMQS driver.
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0x6000 at 0xb7f04000
(II) fglrx(0): [drm] Closed DRM master.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed!                  *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO)             *
(WW) fglrx(0): * no 3D acceleration available                *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xd8000000 FBMappedSize: 0x08000000
(==) fglrx(0): Write-combining range (0xd8000000,0x8000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1408,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1408,1050) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1408 x 7141
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	Solid Horizontal and Vertical Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		32 128x128 slots
		32 256x256 slots
		16 512x512 slots
(II) fglrx(0): Acceleration enabled
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
	compiled for 1.4.0.90, module version = 1.0.0
	ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "Protocol" "auto"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) evaluating device (Mouse0)
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(--) Mouse0: PnP-detected protocol: "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
SetClientVersion: 0 9
SetGrabKeysState - disabled
SetGrabKeysState - enabled
kozzi avatar 21.2.2008 12:38 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
Tak to vypada ze chyba je v tech ovladacich, je to nejspis BUG budes muset pockat na to az to opravi. Mezitim zkus pouzit radeonhd jestli podporuje tvoji kartu.
Linux je jako mušketýři "jeden za všechny, všichni za jednoho"
unknown_ avatar 21.2.2008 12:42 unknown_ | skóre: 30 | blog: blog
Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
Mám ATI Mobility Radeon 9700, mám pocit, že na tu radeonhd nejde, ale můžu to zkusit.
kozzi avatar 21.2.2008 12:49 kozzi | skóre: 55 | blog: vse_o_vsem | Pacman (Bratrušov)
Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
mas pravdu neni. Dalsi moznost je prejit na nejakou starsi verzi catalyst, ale ta nebude podporovat AIGLX, tudiz ani compiz atd, ale akcelerace by tam jed mela.
Linux je jako mušketýři "jeden za všechny, všichni za jednoho"
21.2.2008 12:41 Jix0 | skóre: 24 | blog: Not only for humans
Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
Odpovědět | | Sbalit | Link | Blokovat | Admin
Dopis do Xorg.conf toto:
Section "Extensions"
        Option      "Composite" "disabled"
EndSection
a v sekci Module odkomentuj (odstran tu mrizku) pred tim "Load"
#	Load  "dri"
If you will not cooperate, you are to be executed! | Starting as a DJ
unknown_ avatar 21.2.2008 12:45 unknown_ | skóre: 30 | blog: blog
Rozbalit Rozbalit vše Re: Arch, catalyst a *ERROR* CMMQS initialization is failed
Nepomohlo. Spíš to bude asi ten bug.

Založit nové vláknoNahoru

Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.