fluxbox rozlišení monitoru

mam system rozdělenej na 3 ruzný desktopy kde, gnome, fluxbox

zajímalo by mně jestly je to xorgem, že my fluxbox ukazuje rozlíšení větší než je sám monitor a musim z myší vždy pohnout abych se dostal na druhou stranu plochy (ne na druhou plochu)

mam smazat větší hodnoty a nechat tam jen tu hodnotu co potřebuju a který mam v ostatních desktopech

zde dám výpis xorg# xorg.conf (X.Org X Window System server configuration file)

#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg
# commented out by update-manager, HAL is now used
#Section "InputDevice"
#    Identifier    "Generic Keyboard"
#    Driver        "kbd"
#    Option        "XkbRules"    "xorg"
#    Option        "XkbModel"    "pc105"
#    Option        "XkbLayout"    "cz"
#EndSection
# commented out by update-manager, HAL is now used
#Section "InputDevice"
#    Identifier    "Configured Mouse"
#    Driver        "mouse"
#    Option        "CorePointer"
#EndSection

Section "Monitor"
    Identifier    "Configured Monitor"
    Vendorname    "Fujitsu"
    Modelname    "Fujitsu ErgoPro x174"
    Horizsync    30.0-92.0
    Vertrefresh    50.0-150.0
    modeline "640x480@60" 25.2 640 656 752 800 480 490 492 525 -vsync -hsync
    modeline "640x480@72" 31.5 640 664 704 832 480 489 491 520 -vsync -hsync
    modeline "640x480@75" 31.5 640 656 720 840 480 481 484 500 -vsync -hsync
    modeline "640x480@85" 36.0 640 696 752 832 480 481 484 509 -vsync -hsync
    modeline "800x600@56" 36.0 800 824 896 1024 600 601 603 625 +hsync +vsync
    modeline "800x600@72" 50.0 800 856 976 1040 600 637 643 666 +hsync +vsync
    modeline "800x600@75" 49.5 800 816 896 1056 600 601 604 625 +hsync +vsync
    modeline "800x600@85" 56.3 800 832 896 1048 600 601 604 631 +hsync +vsync
    modeline "800x600@60" 40.0 800 840 968 1056 600 601 605 628 +hsync +vsync
    modeline "832x624@75" 57.284 832 864 928 1152 624 625 628 667 -vsync -hsync
    modeline "1024x768@85" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
    modeline "1024x768@75" 78.8 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
    modeline "1024x768@70" 75.0 1024 1048 1184 1328 768 771 777 806 -vsync -hsync
    modeline "1024x768@60" 65.0 1024 1048 1184 1344 768 771 777 806 -vsync -hsync
    modeline "1024x768@43" 44.9 1024 1032 1208 1264 768 768 776 817 +hsync interlace +vsync
    modeline "1152x864@75" 108.0 1152 1216 1344 1600 864 865 868 900 +hsync +vsync
    modeline "1280x1024@75" 135.0 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
    modeline "1280x960@60" 102.1 1280 1360 1496 1712 960 961 964 994 -hsync +vsync
    modeline "1280x960@85" 148.5 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync
    modeline "1280x1024@85" 157.5 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
    modeline "1280x1024@60" 108.0 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync
    modeline "1280x960@75" 129.86 1280 1368 1504 1728 960 961 964 1002 -hsync +vsync
    modeline "1400x1050@60" 122.61 1400 1488 1640 1880 1050 1051 1054 1087 -hsync +vsync
    modeline "1400x1050@75" 155.85 1400 1496 1648 1896 1050 1051 1054 1096 -hsync +vsync
    modeline "1600x1200@65" 175.5 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    modeline "1600x1200@60" 162.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    modeline "1600x1200@70" 189.0 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
    modeline "1792x1344@60" 204.8 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync
    modeline "1856x1392@60" 218.3 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync
    modeline "1920x1440@60" 234.0 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync
    Gamma    1.0
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Monitor        "Configured Monitor"
    Device        "Configured Video Device"
    Defaultdepth    24
    SubSection "Display"
        Depth    24
        Virtual    1920    1440
        Modes        "1024x768@75"    "1024x768@70"    "1024x768@85"    "1024x768@60"    "832x624@75"    "1024x768@43"    "800x600@60"    "1152x864@75"    "800x600@85"    "1280x1024@75"    "800x600@75"    "1280x960@60"    "800x600@72"    "1280x960@85"    "800x600@56"    "1280x1024@85"    "640x480@85"    "1280x1024@60"    "640x480@75"    "1280x960@75"    "640x480@72"    "1400x1050@60"    "640x480@60"    "1400x1050@75"    "1600x1200@65"    "1600x1200@60"    "1600x1200@70"    "1792x1344@60"    "1856x1392@60"    "1920x1440@60"
    EndSubSection
EndSection

Section "Module"
    Load        "glx"
    Load        "GLcore"
    Load        "dri"
    Load        "v4l"
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    screen 0 "Default Screen" 0 0
EndSection

Section "Device"
    Identifier    "Configured Video Device"
    Boardname    "SiS 630"
    Busid        "PCI:1:0:0"
    Driver        "sis"
    Screen    0
    Vendorname    "SiS"
EndSection

Section "ServerFlags"
    Option    "DontZap"    "True"
EndSection

sám se vygeneroval při upgrade ubuntu 8.04 na 9.04 a mam ho v etc/X11/xorg.conf

p.s. díky za radu vyskoušim

Když jsem smazal virtual, tak se mi sice o trochu zmenšila plocha, ale furt to nebylo ono, napsal jsem virtual a hodnotu co potřebuju a fachá. Diky za ten virtaul cest. :)

Jěště to stále neni ono, musel jsem vše vrátit zpět,rozhodilo mi to gnome.

Zajímalo by mně jak nastavit, aby přihlašovací plocha byla 1280x960(4:3) a i fluxbox. Gnome a Kde mam, ale fluxbox ne.

Neni na fluxboxu taky nějaký okno, kde mužu změnit na toto rozlišení, neb v xorg. se nenastavuje 4:3 a nevim jestli to to označení není nahodou 1280x960@75 .

23.9.2009 19:35 Amarok | skóre: 33 | blog: blogoblog
Rozbalit Rozbalit vše Re: fluxbox rozlišení monitoru

Ve fluxboxu zadny konfiguracni programek pro rozliseni neni. Tvuj xorg.conf vypada fakt zvlastne, je tam toho nejak moc (co si zkusit vygenerovat novy/cisty xorg.conf?), mozna je to jinou distribuci. Ja mam fluxbox a archlinux, tady jsou ty podstatne casti z konfiguraku, bezelo mi to i v pohode s monitorem 1280x1024, ted mam sirsi, tak jsem jen pridal dalsi rozliseni, zadne problemy.


Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Monitor"
        Identifier   "Monitor0"
        VendorName   "Monitor Vendor"
        ModelName    "Monitor Model"
        HorizSync 30.0 - 130.0 # safe for LCD's
        VertRefresh 50.0 - 100.0 # safe for LCD's
EndSection

Section "Device"
        Identifier  "Card0"
        Driver      "nvidia"
        VendorName  "nVidia Corporation"
        BoardName   "G72 [GeForce 7300 LE]"
        BusID       "PCI:2:0:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth 24
        SubSection "Display"
                Viewport   0 0
                Depth     24
                Modes "1680x1050" "1280x1024" "800x600" "640x480"
        EndSubSection
EndSection

GNUniverse - May the source be with you...

24.9.2009 09:29 linuxik | skóre: 32 | Milovice
Rozbalit Rozbalit vše Re: fluxbox rozlišení monitoru

Tak ten radek virtual smazni uplne a v modes nech pouze jedinne rozliseni ktere chces.

díky vyřešeno :)

Dotaz: fluxbox rozlišení monitoru

Odpovědi