Portál AbcLinuxu, 10. května 2025 07:24
[ 233.225384] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 233.425046] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 2 [ 233.625068] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 3 [ 233.825054] wlan0: direct probe to AP 00:4f:62:1f:50:cd timed out [ 239.004322] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 239.012156] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 239.212040] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 2 [ 239.416025] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 3 [ 239.616027] wlan0: direct probe to AP 00:4f:62:1f:50:cd timed out [ 250.544291] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 250.552245] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 250.752034] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 2 [ 250.952025] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 3 [ 250.953894] wlan0 direct probe responded [ 250.953898] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 250.956539] wlan0: authenticated [ 250.956543] wlan0: associate with AP 00:4f:62:1f:50:cd [ 250.959930] wlan0: RX AssocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 250.959933] wlan0: associated [ 261.512030] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 279.688259] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 279.696188] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 279.704134] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 279.708620] wlan0: authenticated [ 279.708625] wlan0: associate with AP 00:4f:62:1f:50:cd [ 279.712742] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 279.712747] wlan0: associated [ 292.092055] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 292.984323] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 292.992134] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 292.994004] wlan0 direct probe responded [ 292.994010] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 293.000734] wlan0: authenticated [ 293.000740] wlan0: associate with AP 00:4f:62:1f:50:cd [ 293.002630] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 293.002634] wlan0: associated [ 308.148026] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 309.024294] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 309.032153] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 309.034049] wlan0 direct probe responded [ 309.034053] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 309.039441] wlan0: authenticated [ 309.039445] wlan0: associate with AP 00:4f:62:1f:50:cd [ 309.041554] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 309.041558] wlan0: associated [ 323.340021] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 335.757293] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 335.765139] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 335.766999] wlan0: authenticated [ 335.767004] wlan0: associate with AP 00:4f:62:1f:50:cd [ 335.788621] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 335.788628] wlan0: associated [ 348.756030] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 361.168338] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 361.177573] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 361.179605] wlan0 direct probe responded [ 361.179611] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 361.181336] wlan0: authenticated [ 361.181341] wlan0: associate with AP 00:4f:62:1f:50:cd [ 361.183499] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 361.183504] wlan0: associated [ 382.788035] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 400.980296] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 400.988142] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 401.188058] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 2 [ 401.190042] wlan0 direct probe responded [ 401.190049] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 401.191774] wlan0: authenticated [ 401.191780] wlan0: associate with AP 00:4f:62:1f:50:cd [ 401.193839] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 401.193844] wlan0: associated [ 422.240350] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 446.212253] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 446.220211] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 446.222078] wlan0 direct probe responded [ 446.222082] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 446.224648] wlan0: authenticated [ 446.224652] wlan0: associate with AP 00:4f:62:1f:50:cd [ 446.226760] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 446.226763] wlan0: associated [ 464.088031] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 488.029262] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 488.037222] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 488.237063] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 2 [ 488.238984] wlan0 direct probe responded [ 488.238991] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 488.240768] wlan0: authenticated [ 488.240773] wlan0: associate with AP 00:4f:62:1f:50:cd [ 488.244028] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 488.244033] wlan0: associated [ 506.688025] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 530.648293] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 530.656149] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 530.659151] wlan0: authenticated [ 530.659157] wlan0: associate with AP 00:4f:62:1f:50:cd [ 530.664266] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 530.664269] wlan0: associated [ 536.232022] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 565.952251] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 565.960641] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 565.962541] wlan0 direct probe responded [ 565.962548] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 565.964228] wlan0: authenticated [ 565.964236] wlan0: associate with AP 00:4f:62:1f:50:cd [ 565.967653] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 565.967658] wlan0: associated [ 588.300048] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 594.948239] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 594.956603] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 1 [ 595.156020] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 2 [ 595.356032] wlan0: direct probe to AP 00:4f:62:1f:50:cd try 3 [ 595.556033] wlan0: direct probe to AP 00:4f:62:1f:50:cd timed out [ 600.732242] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 600.740536] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 600.744144] wlan0: authenticated [ 600.744152] wlan0: associate with AP 00:4f:62:1f:50:cd [ 600.746874] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 600.746879] wlan0: associated [ 612.106794] wlan0 direct probe responded [ 612.106800] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 612.110602] wlan0: authenticated [ 612.110607] wlan0: associate with AP 00:4f:62:1f:50:cd [ 612.113785] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 612.113789] wlan0: associated [ 630.304038] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 636.948309] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 636.956110] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 636.956487] wlan0: authenticated [ 636.956491] wlan0: associate with AP 00:4f:62:1f:50:cd [ 636.962963] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 636.962968] wlan0: associatedtak sem si rikal ze by mi odesla wifina ? sel sem do jineho systemu a tam jela normalne , tak sem skousel vsechno mozny , nahraval firmwary
[ 666.325039] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10no a stale to same , az potom mne napadlo :
lsmod | grep b43 b43 108776 0 mac80211 141824 1 b43 cfg80211 55188 2 b43,mac80211 input_polldev 3588 1 b43 rfkill 9636 3 rfkill_input,b43 led_class 3852 1 b43 rng_core 3672 1 b43 ssb 37556 1 b43 pcmcia 24288 2 b43,ssb pcmcia_core 31180 5 b43,yenta_socket,rsrc_nonstatic,ssb,pcmciaa rikam si co je input_polldev tak sem dal
rmmod mac80211 ERROR: Module mac80211 is in use by b43tak znova ale :
rmmod b43 rmmod input_polldev modprobe b43no a ? net jede normalne . koukam ze posledni dobou co aktualizace , to rozbiti neceho a hledani jak to zalepit , to si delaj prdel !
19.1.2010 18:55
David Heidelberg | skóre: 46
| blog: blog_
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.30-2-686 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-6) ) #1 SMP Fri Dec 4 00:53:20 UTC 2009 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff70000 (usable) [ 0.000000] BIOS-e820: 000000003ff70000 - 000000003ff7a000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff7a000 - 000000003ff80000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved) [ 0.000000] BIOS-e820: 00000000fffffc00 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] last_pfn = 0x3ff70 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 base 03FF80000 mask FFFF80000 uncachable [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 0037400000 page 2M [ 0.000000] 0037400000 - 00377fe000 page 4k [ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000 [ 0.000000] RAMDISK: 2f297000 - 2ffd3b64 [ 0.000000] ACPI: RSDP 0009fba0 00014 (v00 TLTD ) [ 0.000000] ACPI: RSDT 3ff70000 00038 (v01 HPQOEM SLIC-MPC 06040000 LTP 00000000) [ 0.000000] ACPI: FACP 3ff79ecf 00074 (v01 QUANTA DT3 06040000 PTL 00000003) [ 0.000000] ACPI: DSDT 3ff74aa1 0542E (v01 INTEL SPRGDALE 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 3ff7afc0 00040 [ 0.000000] ACPI: APIC 3ff79f43 0005E (v01 PTLTD APIC 06040000 LTP 00000000) [ 0.000000] ACPI: BOOT 3ff79fa1 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001) [ 0.000000] ACPI: SSDT 3ff79fc9 00037 (v01 PTLTD ACPIHT 06040000 LTP 00000001) [ 0.000000] ACPI: SLIC 3ff70038 00176 (v01 HPQOEM SLIC-MPC 00000001 HPQ 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 135MB HIGHMEM available. [ 0.000000] 887MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 377fe000 [ 0.000000] low ram: 0 - 377fe000 [ 0.000000] node 0 low ram: 00000000 - 377fe000 [ 0.000000] node 0 bootmap 00008000 - 0000ef00 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000053fb10] TEXT DATA BSS ==> [0000100000 - 000053fb10] [ 0.000000] #4 [002f297000 - 002ffd3b64] RAMDISK ==> [002f297000 - 002ffd3b64] [ 0.000000] #5 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000] [ 0.000000] #6 [0000540000 - 0000542105] BRK ==> [0000540000 - 0000542105] [ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000] [ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000] [ 0.000000] found SMP MP-table at [c00f6290] f6290 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000377fe [ 0.000000] HighMem 0x000377fe -> 0x0003ff70 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ff70 [ 0.000000] On node 0 totalpages: 261903 [ 0.000000] free_area_init_node: node 0, pgdat c0408d40, node_mem_map c1000000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3967 pages, LIFO batch:0 [ 0.000000] Normal zone: 1744 pages used for memmap [ 0.000000] Normal zone: 221486 pages, LIFO batch:31 [ 0.000000] HighMem zone: 271 pages used for memmap [ 0.000000] HighMem zone: 34403 pages, LIFO batch:7 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000 [ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 11 pages at c1805000, static data 22172 bytes [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259856 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.30-2-686 root=/dev/hda6 ro [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] NR_IRQS:1280 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2992.631 MHz processor. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] Initializing HighMem for node 0 (000377fe:0003ff70) [ 0.004000] Memory: 1020028k/1048000k available (2174k kernel code, 27048k reserved, 1138k data, 320k init, 138696k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffe16000 - 0xfffff000 (1956 kB) [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) [ 0.004000] .init : 0xc0444000 - 0xc0494000 ( 320 kB) [ 0.004000] .data : 0xc031f865 - 0xc043c2f0 (1138 kB) [ 0.004000] .text : 0xc0100000 - 0xc031f865 (2174 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004015] Calibrating delay loop (skipped), value calculated using timer frequency.. 5985.26 BogoMIPS (lpj=11970524) [ 0.004197] Security Framework initialized [ 0.004266] SELinux: Disabled at boot. [ 0.004345] Mount-cache hash table entries: 512 [ 0.004578] Initializing cgroup subsys ns [ 0.004645] Initializing cgroup subsys cpuacct [ 0.004709] Initializing cgroup subsys devices [ 0.004773] Initializing cgroup subsys freezer [ 0.004835] Initializing cgroup subsys net_cls [ 0.004925] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.005028] CPU: L2 cache: 512K [ 0.005090] CPU: Physical Processor ID: 0 [ 0.005151] CPU: Processor Core ID: 0 [ 0.005214] Intel machine check architecture supported. [ 0.005281] Intel machine check reporting enabled on CPU#0. [ 0.005346] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available [ 0.005413] CPU0: Thermal monitoring enabled [ 0.005490] Checking 'hlt' instruction... OK. [ 0.021187] ACPI: Core revision 20090320 [ 0.036438] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.040001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.040001] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.040001] ..... (found apic 0 pin 0) ... [ 0.080072] ....... works. [ 0.080132] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 [ 0.084001] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5985.29 BogoMIPS (lpj=11970594) [ 0.004000] CPU: Trace cache: 12K uops, L1 D cache: 8K [ 0.004000] CPU: L2 cache: 512K [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 0 [ 0.004000] Intel machine check architecture supported. [ 0.004000] Intel machine check reporting enabled on CPU#1. [ 0.004000] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available [ 0.004000] CPU1: Thermal monitoring enabled [ 0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.168832] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09 [ 0.169684] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.172142] Brought up 2 CPUs [ 0.172205] Total of 2 processors activated (11970.55 BogoMIPS). [ 0.172314] CPU0 attaching sched-domain: [ 0.172319] domain 0: span 0-1 level SIBLING [ 0.172322] groups: 0 1 [ 0.172329] CPU1 attaching sched-domain: [ 0.172331] domain 0: span 0-1 level SIBLING [ 0.172335] groups: 1 0 [ 0.172425] net_namespace: 1088 bytes [ 0.172425] Booting paravirtualized kernel on bare hardware [ 0.172425] regulator: core version 0.5 [ 0.172425] NET: Registered protocol family 16 [ 0.172425] ACPI: bus type pci registered [ 0.177470] PCI: PCI BIOS revision 2.10 entry at 0xfd952, last bus=3 [ 0.177537] PCI: Using configuration type 1 for base access [ 0.177626] bio: create slab < bio-0 > at 0 [ 0.180709] ACPI: EC: Look up EC in DSDT [ 0.185063] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.192142] ACPI: EC: GPE storm detected, transactions will use polling mode [ 0.456062] ACPI: Interpreter enabled [ 0.456128] ACPI: (supports S0 S3 S4 S5) [ 0.456367] ACPI: Using IOAPIC for interrupt routing [ 0.460740] ACPI: EC: GPE = 0x1d, I/O: command/status = 0x66, data = 0x62 [ 0.460740] ACPI: EC: driver started in poll mode [ 0.460740] ACPI: No dock devices found. [ 0.460740] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.464050] pci 0000:00:00.0: reg 10 32bit mmio: [0xd8000000-0xdfffffff] [ 0.464191] pci 0000:00:1d.0: reg 20 io port: [0x1cc0-0x1cdf] [ 0.464247] pci 0000:00:1d.1: reg 20 io port: [0x1ce0-0x1cff] [ 0.464300] pci 0000:00:1d.2: reg 20 io port: [0x2000-0x201f] [ 0.464363] pci 0000:00:1d.7: reg 10 32bit mmio: [0xd0000000-0xd00003ff] [ 0.464420] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.464490] pci 0000:00:1d.7: PME# disabled [ 0.464636] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 [ 0.464644] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 0.464727] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH4 GPIO [ 0.464815] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07] [ 0.464823] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03] [ 0.464830] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07] [ 0.464838] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03] [ 0.464845] pci 0000:00:1f.1: reg 20 io port: [0x2060-0x206f] [ 0.464853] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff] [ 0.464898] pci 0000:00:1f.5: reg 10 io port: [0x1400-0x14ff] [ 0.464905] pci 0000:00:1f.5: reg 14 io port: [0x1c80-0x1cbf] [ 0.464912] pci 0000:00:1f.5: reg 18 32bit mmio: [0xd0000c00-0xd0000dff] [ 0.464920] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xd0000800-0xd00008ff] [ 0.464949] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 0.465016] pci 0000:00:1f.5: PME# disabled [ 0.465106] pci 0000:00:1f.6: reg 10 io port: [0x1800-0x18ff] [ 0.465114] pci 0000:00:1f.6: reg 14 io port: [0x1c00-0x1c7f] [ 0.465150] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold [ 0.465217] pci 0000:00:1f.6: PME# disabled [ 0.465316] pci 0000:01:00.0: reg 10 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.465323] pci 0000:01:00.0: reg 14 32bit mmio: [0xe0000000-0xefffffff] [ 0.465342] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff] [ 0.465397] pci 0000:00:01.0: bridge 32bit mmio: [0xd1000000-0xd1ffffff] [ 0.465402] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xefffffff] [ 0.465453] pci 0000:03:00.0: reg 10 32bit mmio: [0xd2000000-0xd200ffff] [ 0.465509] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.465576] pci 0000:03:00.0: PME# disabled [ 0.465671] pci 0000:03:01.0: reg 10 32bit mmio: [0x000000-0x000fff] [ 0.465690] pci 0000:03:01.0: supports D1 D2 [ 0.465693] pci 0000:03:01.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.467220] pci 0000:03:01.0: PME# disabled [ 0.467312] pci 0000:03:02.0: reg 10 32bit mmio: [0xd2016000-0xd20167ff] [ 0.467320] pci 0000:03:02.0: reg 14 32bit mmio: [0xd2010000-0xd2013fff] [ 0.467359] pci 0000:03:02.0: supports D1 D2 [ 0.467362] pci 0000:03:02.0: PME# supported from D0 D1 D2 D3hot [ 0.467429] pci 0000:03:02.0: PME# disabled [ 0.467512] pci 0000:03:03.0: reg 10 32bit mmio: [0xd2014000-0xd2015fff] [ 0.467577] pci 0000:00:1e.0: transparent bridge [ 0.467645] pci 0000:00:1e.0: bridge 32bit mmio: [0xd2000000-0xd20fffff] [ 0.467675] pci_bus 0000:00: on NUMA node 0 [ 0.467683] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.467814] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.467875] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT] [ 0.472133] ACPI: PCI Interrupt Link [LNKA] (IRQs *10 11 14 15) [ 0.472548] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11 14 15) *5 [ 0.472999] ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11 14 15) [ 0.473412] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11 14 15) [ 0.473832] ACPI: PCI Interrupt Link [LNKE] (IRQs *10 11 14 15) [ 0.474248] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11 14 15) *0, disabled. [ 0.474748] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11 14 15) *0, disabled. [ 0.475249] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11 14 15) [ 0.476079] PCI: Using ACPI for IRQ routing [ 0.492143] hpet clockevent registered [ 0.492147] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.492219] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.492444] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.516011] pnp: PnP ACPI init [ 0.516084] ACPI: bus type pnp registered [ 0.521725] pnp: PnP ACPI: found 11 devices [ 0.521790] ACPI: ACPI bus type pnp unregistered [ 0.521856] PnPBIOS: Disabled by ACPI PNP [ 0.521934] system 00:01: ioport range 0x1000-0x107f has been reserved [ 0.522002] system 00:01: ioport range 0x1180-0x11bf has been reserved [ 0.522070] system 00:01: ioport range 0x1c0-0x1cf has been reserved [ 0.522137] system 00:01: ioport range 0x4d0-0x4d1 has been reserved [ 0.522204] system 00:01: ioport range 0xfe00-0xfe00 has been reserved [ 0.522272] system 00:01: iomem range 0xfecf0000-0xfecfffff has been reserved [ 0.522340] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved [ 0.557626] pci 0000:01:00.0: BAR 6: can't allocate mem resource [0xf0000000-0xefffffff] [ 0.557712] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 [ 0.557777] pci 0000:00:01.0: IO window: disabled [ 0.557843] pci 0000:00:01.0: MEM window: 0xd1000000-0xd1ffffff [ 0.557910] pci 0000:00:01.0: PREFETCH window: 0x000000e0000000-0x000000efffffff [ 0.558002] pci 0000:03:01.0: CardBus bridge, secondary bus 0000:04 [ 0.558068] pci 0000:03:01.0: IO window: 0x003000-0x0030ff [ 0.558135] pci 0000:03:01.0: IO window: 0x003400-0x0034ff [ 0.558202] pci 0000:03:01.0: PREFETCH window: 0x50000000-0x53ffffff [ 0.558270] pci 0000:03:01.0: MEM window: 0x58000000-0x5bffffff [ 0.558338] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03 [ 0.558404] pci 0000:00:1e.0: IO window: 0x3000-0x3fff [ 0.558471] pci 0000:00:1e.0: MEM window: 0xd2000000-0xd20fffff [ 0.558539] pci 0000:00:1e.0: PREFETCH window: 0x00000050000000-0x00000053ffffff [ 0.558637] pci 0000:00:1e.0: setting latency timer to 64 [ 0.558654] pci 0000:03:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.558724] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.558727] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] [ 0.558731] pci_bus 0000:01: resource 1 mem: [0xd1000000-0xd1ffffff] [ 0.558734] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xefffffff] [ 0.558737] pci_bus 0000:03: resource 0 io: [0x3000-0x3fff] [ 0.558741] pci_bus 0000:03: resource 1 mem: [0xd2000000-0xd20fffff] [ 0.558744] pci_bus 0000:03: resource 2 pref mem [0x50000000-0x53ffffff] [ 0.558747] pci_bus 0000:03: resource 3 io: [0x00-0xffff] [ 0.558750] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff] [ 0.558754] pci_bus 0000:04: resource 0 io: [0x3000-0x30ff] [ 0.558757] pci_bus 0000:04: resource 1 io: [0x3400-0x34ff] [ 0.558760] pci_bus 0000:04: resource 2 pref mem [0x50000000-0x53ffffff] [ 0.558763] pci_bus 0000:04: resource 3 mem: [0x58000000-0x5bffffff] [ 0.558848] NET: Registered protocol family 2 [ 0.604099] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.604661] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.605872] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.606658] TCP: Hash tables configured (established 131072 bind 65536) [ 0.606731] TCP reno registered [ 0.616173] NET: Registered protocol family 1 [ 0.616320] Trying to unpack rootfs image as initramfs... [ 0.993940] Switched to high resolution mode on CPU 1 [ 0.996011] Switched to high resolution mode on CPU 0 [ 1.059832] Freeing initrd memory: 13554k freed [ 1.080178] Simple Boot Flag at 0x36 set to 0x1 [ 1.080902] audit: initializing netlink socket (disabled) [ 1.080988] type=2000 audit(1263926543.077:1): initialized [ 1.081335] highmem bounce pool size: 64 pages [ 1.081402] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.081601] VFS: Disk quotas dquot_6.5.2 [ 1.081708] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.081845] msgmni has been set to 1748 [ 1.082136] alg: No test for stdrng (krng) [ 1.082300] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.082384] io scheduler noop registered [ 1.082445] io scheduler anticipatory registered [ 1.082508] io scheduler deadline registered [ 1.082589] io scheduler cfq registered (default) [ 1.082746] pci 0000:01:00.0: Boot video device [ 1.083284] isapnp: Scanning for PnP cards... [ 1.436926] isapnp: No Plug & Play device found [ 1.441453] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.441652] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 1.442282] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 1.442510] serial 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.442582] serial 0000:00:1f.6: PCI INT B disabled [ 1.445164] brd: module loaded [ 1.445378] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.447515] i8042.c: Detected active multiplexing controller, rev 1.1. [ 1.449845] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.449915] serio: i8042 AUX0 port at 0x60,0x64 irq 12 [ 1.449987] serio: i8042 AUX1 port at 0x60,0x64 irq 12 [ 1.450058] serio: i8042 AUX2 port at 0x60,0x64 irq 12 [ 1.450129] serio: i8042 AUX3 port at 0x60,0x64 irq 12 [ 1.450591] mice: PS/2 mouse device common for all mice [ 1.450838] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.450928] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 1.451051] cpuidle: using governor ladder [ 1.451114] cpuidle: using governor menu [ 1.451180] No iBFT detected. [ 1.451744] TCP cubic registered [ 1.451861] NET: Registered protocol family 10 [ 1.452510] lo: Disabled Privacy Extensions [ 1.453056] Mobile IPv6 [ 1.453117] NET: Registered protocol family 17 [ 1.453187] Using IPI No-Shortcut mode [ 1.453490] registered taskstats version 1 [ 1.453731] rtc_cmos 00:04: setting system clock to 2010-01-19 18:42:24 UTC (1263926544) [ 1.453891] Freeing unused kernel memory: 320k freed [ 1.454366] Write protecting the kernel text: 2176k [ 1.454455] Write protecting the kernel read-only data: 772k [ 1.482172] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.611586] device-mapper: uevent: version 1.0.3 [ 1.611813] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com [ 1.685250] ACPI Warning (nspredef-0949): \_TZ_.THRM._AL0: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference [20090320] [ 1.685446] ACPI: Expecting a [Reference] package element, found type 0 [ 1.685513] ACPI: Invalid active0 threshold [ 1.725156] thermal LNXTHERM:01: registered as thermal_zone0 [ 1.725231] ACPI: Thermal Zone [THRM] (55 C) [ 1.768851] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:01/device:02/input/input1 [ 1.768956] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 1.837776] usbcore: registered new interface driver usbfs [ 1.837910] usbcore: registered new interface driver hub [ 1.838094] usbcore: registered new device driver usb [ 1.841846] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.841981] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 1.842073] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.842079] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.842207] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 1.846230] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.846315] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported [ 1.846351] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xd0000000 [ 1.895559] Uniform Multi-Platform E-IDE driver [ 1.901726] FDC 0 is a National Semiconductor PC87306 [ 1.918637] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.918762] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.918835] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.918926] usb usb1: Product: EHCI Host Controller [ 1.918999] usb usb1: Manufacturer: Linux 2.6.30-2-686 ehci_hcd [ 1.919068] usb usb1: SerialNumber: 0000:00:1d.7 [ 1.919293] usb usb1: configuration #1 chosen from 1 choice [ 1.919433] hub 1-0:1.0: USB hub found [ 1.919517] hub 1-0:1.0: 8 ports detected [ 1.922944] firewire_ohci 0000:03:02.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.933795] uhci_hcd: USB Universal Host Controller Interface driver [ 1.933974] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.934068] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.934075] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.934216] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 1.934357] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001cc0 [ 1.934503] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.934577] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.934669] usb usb2: Product: UHCI Host Controller [ 1.934742] usb usb2: Manufacturer: Linux 2.6.30-2-686 uhci_hcd [ 1.934817] usb usb2: SerialNumber: 0000:00:1d.0 [ 1.935074] usb usb2: configuration #1 chosen from 1 choice [ 1.935251] hub 2-0:1.0: USB hub found [ 1.935350] hub 2-0:1.0: 2 ports detected [ 1.935649] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.935740] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.935746] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.935868] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 1.936001] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001ce0 [ 1.936142] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.936215] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.936301] usb usb3: Product: UHCI Host Controller [ 1.936370] usb usb3: Manufacturer: Linux 2.6.30-2-686 uhci_hcd [ 1.936444] usb usb3: SerialNumber: 0000:00:1d.1 [ 1.936670] usb usb3: configuration #1 chosen from 1 choice [ 1.936807] hub 3-0:1.0: USB hub found [ 1.936888] hub 3-0:1.0: 2 ports detected [ 1.937231] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.937317] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.937323] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.937445] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 1.939245] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002000 [ 1.939379] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.939453] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.939545] usb usb4: Product: UHCI Host Controller [ 1.939618] usb usb4: Manufacturer: Linux 2.6.30-2-686 uhci_hcd [ 1.939690] usb usb4: SerialNumber: 0000:00:1d.2 [ 1.939927] usb usb4: configuration #1 chosen from 1 choice [ 1.940092] hub 4-0:1.0: USB hub found [ 1.940180] hub 4-0:1.0: 2 ports detected [ 1.979809] piix 0000:00:1f.1: IDE controller (0x8086:0x24db rev 0x02) [ 1.979917] PIIX_IDE 0000:00:1f.1: power state changed by ACPI to D0 [ 1.979993] PIIX_IDE 0000:00:1f.1: enabling device (0005 -> 0007) [ 1.980079] PIIX_IDE 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.980179] piix 0000:00:1f.1: not 100% native mode: will probe irqs later [ 1.980255] ide0: BM-DMA at 0x2060-0x2067 [ 1.980331] ide1: BM-DMA at 0x2068-0x206f [ 1.980405] Probing IDE interface ide0... [ 2.005081] firewire_ohci: Added fw-ohci device 0000:03:02.0, OHCI version 1.10 [ 2.005542] tg3.c:v3.98 (February 25, 2009) [ 2.005640] tg3 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.013113] tg3 0000:03:00.0: wake-up capability disabled by ACPI [ 2.013194] tg3 0000:03:00.0: PME# disabled [ 2.088608] eth0: Tigon3 [partno(BCM95788A50) rev 3003] (PCI:33MHz:32-bit) MAC address 00:c0:9f:3f:66:51 [ 2.088699] eth0: attached PHY is 5705 (10/100/1000Base-T Ethernet) (WireSpeed[0]) [ 2.088781] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] [ 2.088848] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] [ 2.089029] b43-pci-bridge 0000:03:03.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.092773] ssb: Sonics Silicon Backplane found on PCI device 0000:03:03.0 [ 2.228015] usb 1-1: new high speed USB device using ehci_hcd and address 2 [ 2.272149] hda: WDC WD4000AAKB-22UKA0, ATA DISK drive [ 2.364977] usb 1-1: New USB device found, idVendor=1025, idProduct=0045 [ 2.365045] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.365114] usb 1-1: Product: Winter Ver1.3 [ 2.365176] usb 1-1: Manufacturer: Ltd [ 2.365239] usb 1-1: SerialNumber: 712337766603 [ 2.365409] usb 1-1: configuration #1 chosen from 1 choice [ 2.387002] SCSI subsystem initialized [ 2.392965] Initializing USB Mass Storage driver... [ 2.393292] scsi0 : SCSI emulation for USB Mass Storage devices [ 2.393619] usb-storage: device found at 2 [ 2.393623] usb-storage: waiting for device to settle before scanning [ 2.393642] usbcore: registered new interface driver usb-storage [ 2.393711] USB Mass Storage support registered. [ 2.504121] firewire_core: created device fw0: GUID 00c09f000019d63b, S400 [ 2.660015] usb 3-2: new low speed USB device using uhci_hcd and address 2 [ 2.833931] usb 3-2: New USB device found, idVendor=09da, idProduct=000a [ 2.834000] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.834068] usb 3-2: Product: PS/2+USB Mouse [ 2.834130] usb 3-2: Manufacturer: A4Tech [ 2.834296] usb 3-2: configuration #1 chosen from 1 choice [ 2.858909] usbcore: registered new interface driver hiddev [ 2.859049] usbcore: registered new interface driver usbhid [ 2.859115] usbhid: v2.6:USB HID core driver [ 2.874265] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input2 [ 2.874436] a4tech 0003:09DA:000A.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:1d.1-2/input0 [ 2.944070] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.944166] hda: UDMA/100 mode selected [ 2.944318] Probing IDE interface ide1... [ 3.680149] hdc: Optiarc DVD RW AD-7633A, ATAPI CD/DVD-ROM drive [ 4.352064] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 4.355118] hdc: UDMA/33 mode selected [ 4.358257] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 4.368796] ide1 at 0x170-0x177,0x376 on irq 15 [ 4.394400] libata version 3.00 loaded. [ 4.407496] ide-gd driver 1.18 [ 4.407637] hda: max request size: 512KiB [ 4.412073] ide-cd driver 5.00 [ 4.419625] hda: 781422768 sectors (400088 MB) w/16384KiB Cache, CHS=48641/255/63 [ 4.419889] hda: cache flushes supported [ 4.420027] hda: hda1 hda2 < hda5 hda6 hda7 > hda3 [ 4.470333] ide-cd: hdc: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache [ 4.470696] Uniform CD-ROM driver Revision: 3.20 [ 5.850126] EXT4-fs: barriers enabled [ 5.864147] kjournald2 starting: pid 660, dev hda6:8, commit interval 5 seconds [ 5.864160] EXT4-fs: delayed allocation enabled [ 5.864168] EXT4-fs: file extents enabled [ 5.865377] EXT4-fs: mballoc enabled [ 5.865456] EXT4-fs: mounted filesystem hda6 with ordered data mode [ 7.336217] udev: starting version 150 [ 7.412911] usb-storage: device scan complete [ 7.414083] scsi 0:0:0:0: Direct-Access USB2.0 CardReader CF RW 0814 PQ: 0 ANSI: 0 [ 7.415327] scsi 0:0:0:1: Direct-Access USB2.0 CardReader Combo 0814 PQ: 0 ANSI: 0 [ 8.432610] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 [ 8.432716] ACPI: Power Button [PWRF] [ 8.432855] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 [ 8.432941] ACPI: Sleep Button [SLPB] [ 8.433092] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input5 [ 8.472088] ACPI: Lid Switch [LID] [ 8.472288] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input6 [ 8.472378] ACPI: Power Button [PWRB] [ 8.508694] Marking TSC unstable due to TSC halts in idle [ 8.508803] ACPI: CPU0 (power states: C1[C1] C3[C3]) [ 8.509050] processor ACPI_CPU:00: registered as cooling_device0 [ 8.509129] ACPI: Processor [CPU0] (supports 8 throttling states) [ 8.509321] ACPI: Invalid PBLK length [0] [ 8.509437] processor ACPI_CPU:01: registered as cooling_device1 [ 8.535272] ACPI: WMI: Mapper loaded [ 8.564369] ACPI: AC Adapter [ACAD] (on-line) [ 9.057375] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 9.066270] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.070022] parport_pc 00:08: reported by Plug and Play ACPI [ 9.070123] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 9.092401] Driver 'sd' needs updating - please use bus_type methods [ 9.094783] sd 0:0:0:0: [sda] Attached SCSI removable disk [ 9.095975] sd 0:0:0:1: [sdb] Attached SCSI removable disk [ 9.147022] input: PC Speaker as /devices/platform/pcspkr/input/input7 [ 9.896622] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x1d48b1, caps: 0x904713/0x4006 [ 9.941945] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input8 [ 10.160111] ACPI: Battery Slot [BAT1] (battery present) [ 10.184746] intel_rng: FWH not detected [ 10.194382] acer-wmi: Acer Laptop ACPI-WMI Extras [ 10.194475] acer-wmi: No or unsupported WMI interface, unable to load [ 10.297587] yenta_cardbus 0000:03:01.0: CardBus bridge found [1025:0045] [ 10.297691] yenta_cardbus 0000:03:01.0: Using CSCINT to route CSC interrupts to PCI [ 10.297785] yenta_cardbus 0000:03:01.0: Routing CardBus interrupts to PCI [ 10.297862] yenta_cardbus 0000:03:01.0: TI: mfunc 0x01121c12, devctl 0x44 [ 10.356067] cfg80211: Using static regulatory domain info [ 10.356136] cfg80211: Regulatory domain: US [ 10.356198] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 10.356281] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm) [ 10.356348] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.356416] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.356483] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.356551] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm) [ 10.356618] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm) [ 10.428581] Intel ICH Modem 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 10.428693] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64 [ 10.446758] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 10.446944] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 10.520212] cfg80211: Calling CRDA for country: US [ 10.528873] yenta_cardbus 0000:03:01.0: ISA IRQ mask 0x0820, PCI irq 18 [ 10.528945] yenta_cardbus 0000:03:01.0: Socket status: 30000006 [ 10.529015] pci_bus 0000:03: Raising subordinate bus# of parent bus (#03) from #03 to #07 [ 10.529108] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff [ 10.529193] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3000-0x3fff: clean. [ 10.529598] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff [ 10.529684] yenta_cardbus 0000:03:01.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff [ 10.604666] b43-phy0: Broadcom 4306 WLAN found (core revision 5) [ 10.754718] phy0: Selected rate control algorithm 'minstrel' [ 10.755633] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ] [ 10.883177] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 10.885257] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 10.886139] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 10.886914] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 10.887894] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 11.272022] intel8x0_measure_ac97_clock: measured 55323 usecs (2666 samples) [ 11.273535] intel8x0: clocking to 48000 [ 11.943773] EXT4 FS on hda6, internal journal on hda6:8 [ 12.212718] loop: AES key scrubbing enabled [ 12.213266] loop: loaded (max 8 devices) [ 13.176086] fuse init (API version 7.11) [ 15.082853] tg3 0000:03:00.0: firmware: requesting tigon/tg3_tso5.bin [ 15.135371] tg3 0000:03:00.0: wake-up capability disabled by ACPI [ 15.135455] tg3 0000:03:00.0: PME# disabled [ 15.406220] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.503140] vboxdrv: Trying to deactivate the NMI watchdog permanently... [ 21.503144] vboxdrv: Successfully done. [ 21.503147] vboxdrv: Found 2 processor cores. [ 21.503263] vboxdrv: fAsync=0 offMin=0x44c offMax=0x4770 [ 21.503393] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 21.503475] vboxdrv: Successfully loaded version 3.1.2_OSE (interface 0x00100001). [ 21.856247] ax25spyd uses obsolete (PF_INET,SOCK_PACKET) [ 22.645656] NET: Registered protocol family 4 [ 23.350485] NET: Registered protocol family 5 [ 24.629830] Bluetooth: Core ver 2.15 [ 24.630316] NET: Registered protocol family 31 [ 24.630381] Bluetooth: HCI device and connection manager initialized [ 24.630448] Bluetooth: HCI socket layer initialized [ 24.668375] Bluetooth: L2CAP ver 2.13 [ 24.668440] Bluetooth: L2CAP socket layer initialized [ 24.745644] Bluetooth: RFCOMM socket layer initialized [ 24.745738] Bluetooth: RFCOMM TTY layer initialized [ 24.745813] Bluetooth: RFCOMM ver 1.11 [ 24.799691] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 24.799761] Bluetooth: BNEP filters: protocol multicast [ 24.825844] Bridge firewalling registered [ 24.840790] Bluetooth: SCO (Voice Link) ver 0.6 [ 24.840887] Bluetooth: SCO socket layer initialized [ 28.003360] lp0: using parport0 (interrupt-driven). [ 28.021279] ppdev: user-space parallel port driver [ 30.991317] RPC: Registered udp transport module. [ 30.991400] RPC: Registered tcp transport module. [ 31.049583] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 31.906820] lo: Disabled Privacy Extensions [ 33.028249] Linux agpgart interface v0.103 [ 33.181380] nvidia: module license 'NVIDIA' taints kernel. [ 33.181388] Disabling lock debugging due to kernel taint [ 33.437159] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 33.437173] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 33.437510] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.22 Sun Nov 8 20:26:31 PST 2009 [ 33.988558] input: b43-phy0 as /devices/virtual/input/input9 [ 34.016050] b43 ssb0:0: firmware: requesting b43/ucode5.fw [ 34.056977] b43 ssb0:0: firmware: requesting b43/pcm5.fw [ 34.088144] b43 ssb0:0: firmware: requesting b43/b0g0initvals5.fw [ 34.117025] b43 ssb0:0: firmware: requesting b43/b0g0bsinitvals5.fw [ 34.284028] b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10) [ 34.353727] Registered led device: b43-phy0::tx [ 34.353754] Registered led device: b43-phy0::rx [ 34.353778] Registered led device: b43-phy0::radio [ 34.386317] b43-phy0: Radio turned on by software [ 34.389831] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 43.856787] devkit-disks-da[3601]: segfault at c ip 080660da sp bf9193a0 error 4 in devkit-disks-daemon[8048000+28000] [ 55.532814] ACPI: EC: missing confirmations, switch off interrupt mode. [ 55.660739] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 55.662682] wlan0: authenticated [ 55.662688] wlan0: associate with AP 00:4f:62:1f:50:cd [ 55.665294] wlan0: RX AssocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 55.665300] wlan0: associated [ 55.666180] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 65.124238] process `skype.real' is using obsolete setsockopt SO_BSDCOMPAT [ 65.884041] wlan0: no IPv6 routers present [ 254.884022] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 298.948297] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 298.956182] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 298.960216] wlan0: authenticated [ 298.960222] wlan0: associate with AP 00:4f:62:1f:50:cd [ 298.970383] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 298.970388] wlan0: associated [ 314.972024] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 321.616294] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 321.624131] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 321.626648] wlan0: authenticated [ 321.626652] wlan0: associate with AP 00:4f:62:1f:50:cd [ 321.630025] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 321.630029] wlan0: associated [ 329.596065] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 336.244297] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 336.252119] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 336.257002] wlan0: authenticated [ 336.257009] wlan0: associate with AP 00:4f:62:1f:50:cd [ 336.260631] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 336.260635] wlan0: associated [ 342.512025] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 354.924339] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 354.926945] wlan0: authenticated [ 354.926952] wlan0: associate with AP 00:4f:62:1f:50:cd [ 354.930337] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 354.930344] wlan0: associated [ 354.931236] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 354.933038] wlan0: authenticated [ 354.933045] wlan0: associate with AP 00:4f:62:1f:50:cd [ 354.934912] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 354.934919] wlan0: associated [ 362.420020] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 380.597316] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 380.605221] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 380.617846] wlan0: authenticated [ 380.617852] wlan0: associate with AP 00:4f:62:1f:50:cd [ 380.624698] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 380.624703] wlan0: associated [ 404.952063] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating [ 411.597299] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 411.605175] wlan0: authenticate with AP 00:4f:62:1f:50:cd [ 411.607576] wlan0: authenticated [ 411.607582] wlan0: associate with AP 00:4f:62:1f:50:cd [ 411.620299] wlan0: RX ReassocResp from 00:4f:62:1f:50:cd (capab=0x431 status=0 aid=2) [ 411.620304] wlan0: associated [ 421.792024] wlan0: no probe response from AP 00:4f:62:1f:50:cd - disassociating
Tiskni
Sdílej:
ISSN 1214-1267, (c) 1999-2007 Stickfish s.r.o.
19.1.2010 17:51